|
Paul Horn B05.HM16.1823.1 Drill rod with shaft diameter 16 mm. |
|
Paul Horn B05.ST16.2025.01 Drill rod with shaft diameter 16 mm. |
|
Paul Horn B05.ST16.2530.01 Drill rod with shaft diameter 16 mm. |
|
Paul Horn B05.ST16.3035.01 Drill rod with shaft diameter 16 mm. |
|
Paul Horn B05.ST16.3540.01 Drill rod with shaft diameter 16 mm. |
|
Paul Horn B105.0010.01 Toolholder with shank diameters 10:00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0010.01A Toolholder with shank diameters 10:00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0010.1.01A Toolholder with shank diameters 10:00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0010.9.01 Toolholder with shank diameters 10:00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.01A Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.02 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.11.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.K.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.M8.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0012.M8.K.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.01A Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.02 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.11.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.K.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.M8.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.M8.K.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.U1.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0016.U1.02 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.01 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.02 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.1.03 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.1.09 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.1.10 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.2.01 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.K.01 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.M8.01 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0020.M8.K.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0022.01 Toolholder with shaft diameter 22.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0022.02 Toolholder with shaft diameter 22.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0022.1.2.01 Toolholder with shaft diameter 22.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0022.2.1.01 Toolholder with shaft diameter 22 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0022.2.2.01 Toolholder with shaft diameter 22 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0025.01 Toolholder with shaft diameter 25.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0025.2.01 Toolholder with shaft diameter 25.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0025.M8.01 Toolholder with shaft diameter 25.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.0028.01 Toolholder with shaft diameter 28.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn B105.KM16.01 Tool holders with interface KM16, fits to inserts type 105 base receptacle to z. B. KM16 NCM 1616 100 |
|
Paul Horn B105.KM16.90.01 Tool holders with interface KM16, fits to inserts type 105 base receptacle to z. B. KM16 NCM 1616 100 |
|
Paul Horn B105.WF20.2.01 Tool holders with interface WF20-12, fits to inserts type 105 base receptacle to z. B. WFB ... ... |
|
Paul Horn B105.WF20.3.01 Tool holders with interface WF20-12, fits to inserts type 105 base receptacle to z. B. WFB ... ... |
|
Paul Horn B105.WF24.2.01 Tool holders type |
|
Paul Horn B105.WF32.2.01 Tool holders type |
|
Paul Horn B108.0006.01A Toolholder with shaft diameter 6:00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0008.00 Toolholder with shaft diameter 8:00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0008.01 Toolholder with shaft diameter 8:00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.00 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.00S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.01S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.02 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.02S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.03 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, fits to inserts type 108 and S108. |
|
Paul Horn B108.0012.03S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 108 and S108. |
|
Paul Horn B108.KM16.01 Tool holders with interface KM16, fits to inserts type 108 and S108. |
|
Paul Horn B108.KM16.02 Tool holders with interface KM16, fits to inserts type 108 and S108. |
|
Paul Horn B108.KM16.90.01 Tool holders with interface KM16, fits to inserts type 108 and S108. |
|
Paul Horn B108.KM16.90.02 Tool holders type |
|
Paul Horn B109.0012.01 Toolholder with shaft diameter 12.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 109th |
|
Paul Horn B109.0016.01 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 109th |
|
Paul Horn B109.0020.01 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 109th |
|
Paul Horn B109.0022.1.2.01 Toolholder with shaft diameter 22.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 109th |
|
Paul Horn B109.0025.01 Toolholder with shaft diameter 25.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 109th |
|
Paul Horn B110.0016.02 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.0016.U1.02 Toolholder with shank diameters 16.00mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.0020.02 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.0020.K.02 Toolholder with shaft diameter 20.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.0022.02 Toolholder with shaft diameter 22.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.0025.02 Toolholder with shaft diameter 25.00 mm and 2 clamping surfaces for aligning, suitable to cutting type 110th |
|
Paul Horn B110.WF20.2.02 Toolholder with shaft diameter 12 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to cutting type 110th |
|
Paul Horn B110.WF24.2.02 Tool holders type |
|
Paul Horn B110.WF32.2.02 Tool holders type |
|
Paul Horn B111.0008.01 Toolholder with shaft diameter 8:00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0008.01A Toolholder with shaft diameter 8:00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.00 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.00S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.01S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.02S Toolholder with shaft diameter 12.00 mm and 1 clamping surfaces for aligning in receiving WFB ... .., fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.03S Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning in receiving WFB ... .., fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.11 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.2.00 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.2.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.2.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B111.0012.2.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 111 and S111. |
|
Paul Horn B114.0012.00 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.00S Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning in receiving WFB ..., fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.01S Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.02S Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning in receiving WFB ..., fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.03S Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning in receiving WFB ..., fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.2.00 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.2.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.2.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0012.2.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.00 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.01 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.02 Toolholder with shaft diameter 16.00 mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.03 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.2.00 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.2.01 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.2.02 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B114.0016.2.03 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 114 and S114. |
|
Paul Horn B116.0012.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0012.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0012.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0012.2.01 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0012.2.02 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0012.2.03 Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.01 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.02 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.03 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.2.01 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.2.02 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B116.0016.2.03 Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, fits to inserts type 116 and S116. |
|
Paul Horn B21 40 46 036 Between brackets Intramax 49-88 for direct recording of Einbauhalter BKT105.U90K.01 and BKT356.U90K.05. |
|
Paul Horn B21 63 80 042 Between brackets Intramax 49-88 for direct recording of Einbauhalter BKT105.U90G.01 and BKT356.U90G.05. |
|
Paul Horn B53DIN125 Washer B5.3 DIN 125th St |
|
Paul Horn BD10 40A 40 035 System Recording Urma BD10 40A 40,035 With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 40A 63 065 System Recording Urma with interface to the machine SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 40B 40 035 System Recording Urma BD10 40B 40,035 With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 40B 63 065 System Recording Urma with interface to the machine SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 50A 25 060 System Recording Urma interface to the machine SK50, Beta module 25 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 50A 40 060 System Recording Urma interface to the machine SK50, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 50A 63 060 System Recording Urma interface to the machine SK50, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 50B 40 060 System Recording Urma interface to the machine SK50, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD10 50B 63 060 System Recording Urma interface to the machine SK50, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1040A25050 System Recording Urma With Machine Interface SK40, Beta module 25 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1040A32050 System Recording Urma With Machine Interface SK40, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1040A40050 System Recording Urma With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1040A50050 System Recording Urma With Machine Interface SK40, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1040A63090 System Recording Urma With Machine Interface SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1050A32060 System Recording Urma With Machine Interface SK50, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1050A50060 System Recording Urma With Machine Interface SK50, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BD1050A80070 System Recording Urma With Machine Interface SK50, Beta module 80 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BGT001.0010.50 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter and 1 mm 10:00 clamping surface for aligning. |
|
Paul Horn BGT001.0016.21 Basic holder z for adjustable brackets. B. Type N (Graf), type BKT (Horn), shaft diameter 16.00mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0020.100 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 20.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0022.30 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 22.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0022.70 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 22.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0025.70 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 25.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0028.80 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 28.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0R16.21 Basic holder z for adjustable brackets. B. Type N (Graf), type BKT (Horn), shaft diameter 16.00mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.0R22.25 Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 22.00 mm and 1 clamping area for aligning. |
|
Paul Horn BGT001.C025.30IK Basic holder for adjustable holders z. B. Type N (Graf), type BKT (Horn), shaft diameter 25 mm and 1 clamping area for aligning. |
|
Paul Horn BH10 100A 40 080 System Recording Urma BH10 100A 40,080 With Machine Interface HSK100, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10 100A 63 080 System Recording Urma BH10 100A 63,080 With Machine Interface HSK100, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10 50A 40 065 System Recording Urma with interface to the machine HSK50, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10 63A 40 065 System Recording Urma with interface to the machine HSK63, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10 63A 63 080 System Recording Urma BH10 63A 63,080 With Machine Interface HSK63, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10100A100100 System Recording Urma With Machine Interface HSK100, Beta module 100 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10100A50080 System Recording Urma With Machine Interface HSK100, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH10100A80090 System Recording Urma With Machine Interface HSK100, Beta module 80 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH1050A25055 System Recording Urma With Machine Interface HSK50, Beta module 25 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH1050A32060 System Recording Urma With Machine Interface HSK50, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH1063A25055 System Recording Urma With Machine Interface HSK63, Beta module 25 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH1063A32060 System Recording Urma With Machine Interface HSK63, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BH1063A50070 System Recording Urma With Machine Interface HSK63, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BI10 40 40 035 System Recording Urma With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BI10 40 63 070 System Recording Urma With Machine Interface SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BI10 50 40 060 System Recording Urma interface to the machine SK50, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BI10 50 63 060 System Recording Urma interface to the machine SK50, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BKT105.2327.01 Adjustable holder Pairing Basic holder type BGT, for insert type 105th |
|
Paul Horn BKT105.2445.01 Adjustable holder Pairing Basic holder type BGT, for insert type 105th |
|
Paul Horn BKT105.2445.02 Adjustable holder Pairing Basic holder type BGT, for insert type 105th |
|
Paul Horn BKT105.U90G.01 Adjustable holder Pairing Intramax intermediate brackets for insert type 105th |
|
Paul Horn BKT105.U90K.01 Adjustable holder Pairing Intramax intermediate brackets for insert type 105th |
|
Paul Horn BKT110.U17G.02 Einbauhalter Pairing Intramax intermediate brackets for insert type 110th |
|
Paul Horn BKT356.U90G.05 Einbauhalter Pairing Intramax intermediate brackets for insert type 315th |
|
Paul Horn BKT356.U90K.05 Einbauhalter Pairing Intramax intermediate brackets for insert type 315th |
|
Paul Horn BT10 40A 40 028 System Recording Urma BT10 40A 40,028 With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT10 40A 63 055 System Recording Urma BT10 40A 63,055 With Machine Interface SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT10 50A 40 070 System Recording Urma with terminal interface to the machine SK50, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT10 50A 63 080 System Recording Urma BT10 50A 63,080 With Machine Interface SK50, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1040A25060 System Recording Urma With Machine Interface SK40, Beta module 25 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1040A32060 System Recording Urma With Machine Interface SK40, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1040A40060 System Recording Urma With Machine Interface SK40, Beta module 40 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1040A50060 System Recording Urma With Machine Interface SK40, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1040A63070 System Recording Urma With Machine Interface SK40, Beta module 63 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1050A32070 System Recording Urma With Machine Interface SK50, Beta module 32 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1050A50070 System Recording Urma With Machine Interface SK50, Beta module 50 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BT1050A80100 System Recording Urma With Machine Interface SK50, Beta module 80 for receiving z. B. Fine boring head 05 and Intramax consoles. |
|
Paul Horn BU105.0500.01 Toolholder with shaft diameter 12.7 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.0750.01 Toolholder with shaft diameter 5.19 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.0750.2.2.01 Toolholder with shaft diameter 19.5 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.0750.5.01 Toolholder with shaft diameter 19.5 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.0750.5.3.01 Toolholder with shaft diameter 19.5 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.1000.01 Toolholder with shaft diameter 25.4 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn BU105.1000.5.01 Toolholder with shaft diameter 25.40 mm and 2 clamping surfaces for aligning, suitable to cutting type 105th |
|
Paul Horn C00 12 08 Cylindrical grooved pin, parallel notched stud fits URMA Intramax diameter consoles |
|
Paul Horn C00 12 61 Dowel pin, parallel notched stud fits URMA Intramax diameter consoles |
|
Paul Horn C00 22 02 Clamping screw C002202, suitable for URMA Intramax 87-207 diameter console 22 01 11 018 22 01 14 018 and 22 01 17 018 |
|
Paul Horn C00 22 05 Clamping screw C002205, suitable for URMA Intramax 87-207 diameter console 22 01 11 018 22 01 14 018 and 22 01 17 018 |
|
Paul Horn C00 22 58 Clamping screw C002258, suitable for URMA Intramax 49-88 diameter console 22 03 06 012 and 22 03 07 012 |
|
Paul Horn C002256 Screw C00 22 56 |
|
Paul Horn C002260 Screw C00 22 60 |
|
Paul Horn C009025 Central turnbuckles with through hole for central coolant supply, suitable for. B. for Reibschäfte MDR ... .A.D.Z |
|
Paul Horn C5.L220.120.K1 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C5.R220.120.K1 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C6.L220.150.K1.IK Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C6.L845.01.K1 Basic holder for cassette type R / LNK100.845 ... with HORN polygonal shank ISO 26623 |
|
Paul Horn C6.R220.120.K1.IK Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C6.R845.01.K1 Basic holder for cassette type R / LNK100.845 ... with HORN polygonal shank ISO 26623 |
|
Paul Horn C8.L220.150.K1 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C8.L220.150.K2 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C8.R220.150.K1 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn C8.R220.150.K2 Basic holder for cassette type 100/220/224/356/360 |
|
Paul Horn CCGT060201N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060201N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060201N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060201N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060201N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060202N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204L.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204L.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204R.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204R.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060204R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208L.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208L.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208R.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208R.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT060208R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T301N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T301N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T301N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T302N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304L.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T304R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308L.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308R.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308R.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T308R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T312L.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T312N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT09T312N.HN HD08 The CVD-D insert is good for copying inner and outer contours. |
|
Paul Horn CCGT09T312N.HS HD08 The CVD-D insert is good for copying inner and outer contours. |
|
Paul Horn CCGT09T312R.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120402N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404L.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.W.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.W.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404N.W.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404R.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120404R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408L.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408L.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408R.G.HN PD02 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120408R.G.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120412L.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120412N.H6 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120412N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120412N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGT120412R.G.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060201N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060201N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060201N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202.MD.A0 MD10 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry 00 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202.MD.K0 MD10 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry 00 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202.MD.M0 MD10 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry 00 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060202N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060204L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060204N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060204N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060204N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060204R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060208.MD.A0 MD10 Insert equipped with MKD (monocrystalline diamond) for gloss turning of internal and external contours in non-ferrous metals and plastics such. As acrylic. |
|
Paul Horn CCGW060208.MD.K0 MD10 Insert equipped with MKD (monocrystalline diamond) for gloss turning of internal and external contours in non-ferrous metals and plastics such. As acrylic. |
|
Paul Horn CCGW060208.MD.M0 MD10 Insert equipped with MKD (monocrystalline diamond) for gloss turning of internal and external contours in non-ferrous metals and plastics such. As acrylic. |
|
Paul Horn CCGW060208L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060208N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060208N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW060208R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T301N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T301N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T301N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T302N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T302N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T302N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T304L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T304N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T304N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T304N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T304R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T308L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T308N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T308N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T308R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T312L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T312N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW09T312R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120402N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120402N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120402N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120404L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120404N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120404N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120404N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120404R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120408L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120408N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120408N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120408R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CCGW120412N.H0 HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060201N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060202N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060204N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060208N.H6 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H6 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT060208N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T301N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T302N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.HS HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.W.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T304N.W.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T308N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T308N.HN PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T308N.HS PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry HS to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGT09T312N.HN HD08 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry .HN to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060202N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060202N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060204L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060204N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060204N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060204R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060208L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060208N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW060208R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T302N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T302N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T304N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T304N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T308L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T308N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW09T308R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120402N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120402N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120404N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120404N.W.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120408L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120408N.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120408R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120412L.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn CPGW120412R.G.H0 PD70 fitted insert CVD D (HD08) or PCD (PD70 / PD02) equipped with lasered geometry H0 to rotate from inside and outside contours in non-ferrous metals, CFRP and other plastics. |
|
Paul Horn D 041 VL Torque screwdriver with scale, suitable for all interchangeable blades DSW ... K and DT ... K |
|
Paul Horn D 15 VL Torque screwdriver with scale, suitable for universal bit holder D14ZBK, interchangeable blades DSW ... K and DT ... k |
|
Paul Horn D 515 QL Torque screwdriver with scale, suitable for universal bit holder D14ZBQ, interchangeable blades DSW ... Q and Q DT ... |
|
Paul Horn D T15 K Interchangeable Blade DT15K for Torx screws, suitable for torque screwdrivers D041VL, D14ZBK, D15VL and D28VL |
|
Paul Horn D T27P Q Interchangeable blade for Torx PlusВ® screws DT27PQ, suitable for the torque screwdriver D515QL |
|
Paul Horn D T6 K Interchangeable Blade DT6K for Torx screws, suitable for torque screwdrivers D041VL, D14ZBK, D15VL and D28VL |
|
Paul Horn D T8 K Interchangeable Blade DT8K for Torx screws, suitable for torque screwdrivers D041VL, D14ZBK, D15VL and D28VL |
|
Paul Horn D02.19530.18.AM Two Schneiderkopf for Boring / drilling of diameter 19.5 to 30 mm, fits to z. B. disc holder D050 ...., size Alpha module 18.5 |
|
Paul Horn D02.2939.25.BM Two Schneiderkopf for Boring / drilling of diameter 29 to 39 mm, fits to z. B. disc holder D050 ...., size Beta Module 25 |
|
Paul Horn D02.3851.32.BM Two Schneiderkopf for Boring / drilling of Diameter 38 up to 51 mm, fits to z. B. disc holder D050 ...., size Beta Module 32 |
|
Paul Horn D02.5067.40.BM Two Schneiderkopf for Boring / drilling of Г 50 up to 51 mm, fits to z. B. disc holder D050 ...., size Beta Module 40 |
|
Paul Horn D02.6688.63.BM Two Schneiderkopf for Boring / drilling of Diameter 66 up to 88 mm, fits to z. B. disc holder D050 ...., size Beta Module 63 |
|
Paul Horn D050.19525.90 Plate holder for Boring / drilling of diameter 19.5 to 25 mm, suitable for twin cutter head D02 .... |
|
Paul Horn D050.22530.90 Plate holder for Boring / drilling of diameter 22.5 to 30 mm, suitable for twin cutter head D02 .... |
|
Paul Horn D050.2939.90 Plate holder for Boring / drilling of diameter 29 to 39 mm, suitable for twin cutter head D02 .... |
|
Paul Horn D050.3851.90 Plate holder for Boring / drilling of Diameter 38 up to 51 mm, suitable for twin cutter head D02 .... |
|
Paul Horn D050.5067.90 Plate holder for Boring / drilling of Г 50 to 67 mm, suitable for twin cutter head D02 .... |
|
Paul Horn D11 41 01 054 Basic recording URMA for direct recording of Einbauhalter BKT105.U90K.01 and BKT356.U90K.05, with terminal SK40 / A. |
|
Paul Horn D11 41 03 052 Basic recording URMA for direct recording of Einbauhalter BKT105.U90K.01 and BKT356.U90K.05, with terminal SK40 / A. |
|
Paul Horn D28VL Torque screwdriver with scale D 28 VL, suitable for universal bit holder D14ZBK, interchangeable blades DSW ... K and DT ... K |
|
Paul Horn DA31.016.A.00 SA4B The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.016.A.00 TA45 The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.016.A.02 SA4B The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.016.A.02 TA45 The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.016.A.04 SA4B The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.016.A.04 TA45 The indexable insert with a cutting diameter of 16 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.020.A.00 TA45 The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.020.A.02 SA4B The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.020.A.02 TA45 The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.020.A.04 SA4B The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.020.A.04 TA45 The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.00 SA4B The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.00 TA45 The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.02 SA4B The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.02 TA45 The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.04 SA4B The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.025.A.04 TA45 The indexable insert with a cutting diameter of 25 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.00 SA4B The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.00 TA45 The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.02 SA4B The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.02 TA45 The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.04 SA4B The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA31.032.A.04 TA45 The indexable insert with a cutting diameter of 32 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA32.020.A.00 SA4B The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA32.020.A.00 TA45 The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
|
Paul Horn DA32.020.A.02 SA4B The indexable insert with a cutting diameter of 20 mm is suitable for plunge milling of internal and external contours. |
