|
Paul Horn R264.0712.02 TF45 Indexable insert with a pitch of 1.25mm and a maximum cutting depth of 0.77 mm is suitable for chasing of metric external threads. |
|
Paul Horn R264.0815.10 MG12 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0815.10 TN35 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0815.M0 MG12 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0815.M0 TN35 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0820.10 MG12 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0820.10 TN35 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0820.M0 MG12 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0820.M0 TN35 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0830.M0 TN35 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.0915.02 TF45 Indexable insert with a pitch of 1.5 mm and maximum cutting depth of 0.92 mm is suitable for chasing of metric external threads. |
|
Paul Horn R264.1515.10 MG12 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1515.10 TN35 Indexable insert with a cutting width of 1.5 mm and maximum cutting depth of 16 mm is suitable for parting and grooving of outer contours. |
|
Paul Horn R264.1515.M0 MG12 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1515.M0 TN35 The indexable insert with a cutting width of 1.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1520.10 MG12 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1520.M0 MG12 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1525.M0 MG12 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1525.M0 TN35 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R264.1530.M0 TN35 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving of outer contours with up to 16 mm depth. |
|
Paul Horn R309.1616.01 Toolholder with shank 16 mm width x 16 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R309.2020.02 Toolholder with shank 20 mm width x 20 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R309.2020.03 Toolholder with shank 20 mm width x 20 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R309.2020.04 Toolholder with shank 20 mm width x 20 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 3.9 to 5.3 mm, version right. |
|
Paul Horn R309.2525.02 Toolholder with shank 25 mm width x 25 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R309.2525.03 Toolholder with shank 25 mm width x 25 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R309.2525.04 Toolholder with shank 25 mm width x 25 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 3.9 to 5.3 mm, version right. |
|
Paul Horn R309.3232.02 Toolholder with shank 32 mm width x 32 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R309.3232.04 Toolholder with shank 32 mm width x 32 mm height for producing corner undercuts for receiving inserts Type 312 with a clamping range from 3.9 to 5.3 mm, version right. |
|
Paul Horn R312.0510.00 TF45 The indexable insert with a cutting width of 1 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0512.00 TF45 The indexable insert with a cutting width of 1.2 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0512.M0 TF45 The indexable insert with a cutting width of 1.2 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0512.V1 TF45 The indexable insert with a cutting width of 1.2 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0514.00 TF45 The indexable insert with a cutting width of 1.44 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0515.00 TF45 The indexable insert with a cutting width of 1.5 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0515.M0 K10 The indexable insert with a cutting width of 1.5 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0515.M0 TF45 The indexable insert with a cutting width of 1.5 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0515.V1 TF45 The indexable insert with a cutting width of 1.5 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0518.00 P20 The indexable insert with a cutting width of 1.99 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0518.00 TN32 Indexable insert with a cutting width of 1.99 mm and maximum cutting depth of 5 mm is suitable by Abstechschräge of 5 ° to butzenarmen parting. |
|
Paul Horn R312.0518.00 TN35 The indexable insert with a cutting width of 1.99 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0520.V2 TH35 The indexable insert with a cutting width of 2 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.0521.00 P20 The indexable insert with a cutting width of 2.29 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0521.00 TN32 Indexable insert with a cutting width of 2.29 mm and maximum cutting depth of 5 mm is suitable by Abstechschräge of 5 ° to butzenarmen parting. |
|
Paul Horn R312.0521.00 TN35 The indexable insert with a cutting width of 2.29 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0522.00 TI25 Indexable insert with a cutting width of 2.29 mm and maximum cutting depth of 5 mm is suitable by Abstechschräge of 5 ° to butzenarmen parting. |
|
Paul Horn R312.0522.00 TN35 Indexable insert with a cutting width of 2.29 mm and maximum cutting depth of 5 mm is suitable by Abstechschräge of 5 ° to butzenarmen parting. |
|
Paul Horn R312.0614.00 TF45 The indexable insert with a cutting width of 1.44 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0614.00 TF46 Indexable insert with a cutting width of 1.44 mm and maximum cutting depth of 5 mm is suitable by Abstechschräge of 6 ° to butzenarmen parting. |
|
Paul Horn R312.0614.00 TI25 The indexable insert with a cutting width of 1.44 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0614.00 TN35 The indexable insert with a cutting width of 1.44 mm is suitable for tapping up to 5 mm depth. |
|
Paul Horn R312.0805.00 TF45 The indexable insert with a cutting width of 0.5 mm is suitable for tapping up to 1 mm depth. |
|
Paul Horn R312.0808.00 TF45 The indexable insert with a cutting width of 0.8 mm is suitable for tapping up to 1.5 mm deep. |
|
Paul Horn R312.1050.17 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 0.4 mm depth of thread with a pitch of 0.5 mm. |
|
Paul Horn R312.1080.27 TN35 Indexable insert for producing thread undercuts to DIN 76 (short version) to match pitch 0.8 mm at maximum penetration depth of 0.65 mm. |
|
Paul Horn R312.1100.27 P20 The indexable insert is suitable for grooving of the inner and outer contours with up to 0.8 mm depth for thread having a pitch of 1 mm. |
|
Paul Horn R312.1100.27 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 0.8 mm depth for thread having a pitch of 1 mm. |
|
Paul Horn R312.1125.27 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 1 mm depth of thread with a pitch of 1.25mm. |
|
Paul Horn R312.1150.37 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 1:15 mm depth of thread with a pitch of 1.5 mm. |
|
Paul Horn R312.1200.53 P20 The indexable insert is suitable for grooving of the inner and outer contours with up to 1.5 mm depth of thread with a pitch of 2 mm. |
|
Paul Horn R312.1210.00 TF45 The indexable insert with a cutting width of 1 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.1210.00 TN35 The indexable insert with a cutting width of 1 mm is suitable for tapping up to 8 mm depth. |
|
Paul Horn R312.1812.M0 K10 Indexable insert uncoated |
|
Paul Horn R312.2015.02 TN35 The indexable insert with a cutting width of 1.5 mm is suitable for grooving up to 2 mm depth. |
|
Paul Horn R312.3020.02 TN35 The indexable insert with a cutting width of 2 mm is suitable for grooving up to 3 mm in depth. |
|
Paul Horn R312.3030.02 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving up to 3 mm in depth. |
|
Paul Horn R312.3031.33 P20 The indexable insert with a cutting width of 3.29 mm is suitable for grooving and turning of internal and external contours with up to 3.5 mm deep. |
|
Paul Horn R312.3031.33 TC92 Indexable insert with `Paris Schliff\' for grooving and turning with 3:29 mm Width (corner radius 0 mm) and a maximum of 3.5 mm deep. |
|
Paul Horn R312.3031.33 TN32 Indexable insert with `Paris Schliff\' for grooving and turning with 3:29 mm Width (corner radius 0 mm) and a maximum of 3.5 mm deep. |
|
Paul Horn R312.3060.27 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 0.5 mm depth of thread with a pitch of 0.6 mm. |
|
Paul Horn R312.3100.37 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 0.8 mm depth for thread having a pitch of 1 mm. |
|
Paul Horn R312.3150.53 TN35 The indexable insert is suitable for grooving of the inner and outer contours with up to 1:15 mm depth of thread with a pitch of 1.5 mm. |
|
Paul Horn R314.0054.00 AS45 Indexable insert with a cutting width of 5.4 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0054.00 TI25 Indexable insert with a cutting width of 5.4 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0054.00 TN35 Indexable insert with a cutting width of 5.4 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0130.00 AS45 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0130.00 TN35 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0130.40 TI25 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0160.00 AS45 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0160.00 TN35 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0160.40 TI25 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0160.40 TN35 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0185.00 AS45 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0185.00 TN35 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0185.40 TI25 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0185.40 TN35 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0215.00 AS45 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0215.00 MG12 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0215.00 TN35 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0215.40 TI25 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0215.40 TN35 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.00 AS45 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.00 MG12 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.00 TI25 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.00 TN35 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.40 TI25 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0265.40 TN35 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0315.00 AS45 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0315.00 MG12 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0315.00 TN35 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0315.40 TI25 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0315.40 TN35 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0320.20 AS45 Indexable insert with a cutting width of 6 mm (nominal size Nw = 0 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 63.5 mm. |
|
Paul Horn R314.0320.20 TI25 Indexable insert with a cutting width of 6 mm (nominal size Nw = 0 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 63.5 mm. |
|
Paul Horn R314.0415.00 AS45 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0415.00 MG12 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0415.00 TI25 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0415.00 TN35 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0415.40 TI25 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0415.40 TN35 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0430.20 AS45 Indexable insert with a cutting width of 4.3 mm (corner radius 2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0430.20 TI25 Indexable insert with a cutting width of 4.3 mm (corner radius 2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0430.25 AS45 Indexable insert with a cutting width of 4.3 mm (corner radius 2.5 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0430.25 TI25 Indexable insert with a cutting width of 4.3 mm (corner radius 2.5 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0515.00 AS45 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0515.00 MG12 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0515.00 TI25 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0515.00 TN35 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0515.40 TI25 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0515.40 TN35 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R314.0540.20 AS45 Indexable insert with a cutting width of 5:43 mm (corner radius 2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0540.20 TI25 Indexable insert with a cutting width of 5:43 mm (corner radius 2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0540.25 AS45 Indexable insert with a cutting width of 5:44 mm (corner radius 2.5 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0540.25 TI25 Indexable insert with a cutting width of 5:44 mm (corner radius 2.5 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0540.40 AS45 Indexable insert with a cutting width of EUR 5.47 mm (corner radius 4 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.0540.40 TI25 Indexable insert with a cutting width of EUR 5.47 mm (corner radius 4 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.1105.54 TN35 Indexable insert with a cutting width of 1.21 mm (nominal size Nw = 1.1 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1307.54 AS45 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1308.54 AS45 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1308.54 TN35 Indexable insert with a cutting width of 1.41 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1535.01 TN35 Indexable insert for milling metric thread in part profile with a pitch of 1.5 - 3.5 mm. |
|
Paul Horn R314.1609.54 AS45 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1609.54 TN35 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1610.54 AS45 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1610.54 TN35 Indexable insert with a cutting width of 1.71 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum groo |
|
Paul Horn R314.1812.54 AS45 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.1812.54 TN35 Indexable insert with a cutting width of 1.96 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2115.54 AS45 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2115.54 TN35 Indexable insert with a cutting width of 26.2 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2140.01 TN35 Indexable insert for milling metric thread in part profile with a pitch 4.0 mm. |
|
Paul Horn R314.2616.54 AS45 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2616.54 TN35 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2617.54 AS45 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.2617.54 TN35 Indexable insert with a cutting width of 2.76 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.3118.54 AS45 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.3118.54 TN35 Indexable insert with a cutting width of 26.3 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.3260.01 TN35 Indexable insert for milling metric thread in part profile with a pitch 6.0 mm. |
|
Paul Horn R314.4060.01 TN35 Indexable insert for milling metric thread in part profile with a pitch 4.0 - 6.0 mm. |
|
Paul Horn R314.4120.54 AS45 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.4120.54 TN35 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.4125.54 AS45 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.4125.54 TN35 Indexable insert with a cutting width of 26.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.5130.61 AS45 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.5130.61 TN35 Indexable insert with a cutting width of 5.26 mm (nominal size Nw = 15.5 mm) is suitable for producing Seegerringnuten DIN 471/472 with NutauГџenkantenfase to inner and outer contours with maximum gro |
|
Paul Horn R314.6032.00 AS45 Indexable insert with a cutting width of 3.2 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.6032.00 TI25 Indexable insert with a cutting width of 3.2 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.6032.00 TN35 Indexable insert with a cutting width of 3.2 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.8043.00 AS45 Indexable insert with a cutting width of 4.3 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.8043.00 TI25 Indexable insert with a cutting width of 4.3 mm (corner radius 0.2 mm) is suitable for producing grooves on the inner and outer contours. |
|
Paul Horn R314.MK50.20 AS45 Indexable insert |
|
Paul Horn R314.MK50.20 TI25 Indexable insert with a cutting width of 5 mm (corner radius 0.15mm) is suitable for the manufacture of outer polygons (Polygon, polygonal milling) in lathes. |
|
Paul Horn R314.MK50.20.L TI25 Indexable insert with a cutting width of 5.4 mm (corner radius 0.6 mm) is suitable for the manufacture of outer polygons (Polygon, polygonal milling) in lathes. |
|
Paul Horn R314.MK50.20L AS45 Indexable insert with a cutting width of 5.4 mm (corner radius 0.6 mm) is suitable for the manufacture of outer polygons (Polygon, polygonal milling) in lathes. |
|
Paul Horn R314.MK50.5.20 AS45 Indexable insert with a cutting width of 5 mm (corner radius 0.15mm) is suitable for the manufacture of outer polygons (Polygon, polygonal milling) in lathes. |
|
Paul Horn R314.MK50.5.20 TI25 Indexable insert with a cutting width of 5 mm (corner radius 0.15mm) is suitable for the manufacture of outer polygons (Polygon, polygonal milling) in lathes. |
|
Paul Horn R314AT30HM Balancing element R314.AT30.HM, plate dummy to fill empty plate seats (weight compensation) for Mehrkantfrässystem 381 |
|
Paul Horn R315.0050.32.00 TN32 The indexable insert with a cutting width of 0.57 mm is suitable for grooving of the inner and outer contours with up to 0.7 mm deep. |
|
Paul Horn R315.0060.32.00 TN32 The indexable insert with a cutting width of 0.67 mm is suitable for grooving of the inner and outer contours with up to 0.8 mm deep. |
|
Paul Horn R315.0070.32.00 TN32 The indexable insert with a cutting width of 0.77 mm is suitable for grooving of the inner and outer contours with up to 1.1 mm deep. |
|
Paul Horn R315.0080.32.00 TN32 The indexable insert with a cutting width of 0.87 mm is suitable for grooving of the inner and outer contours with up to 1.2 mm deep. |
|
Paul Horn R315.0090.32.00 TN32 The indexable insert with a cutting width of 0.97 mm is suitable for grooving of the inner and outer contours with up to 1.4 mm deep. |
|
Paul Horn R315.0100.05 AS45 Indexable insert with a cutting width of 1 mm with radius 0.5 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 2.5 mm. |
|
Paul Horn R315.0100.32.00 TN32 The indexable insert with a cutting width of 1.07 mm is suitable for grooving of the inner and outer contours with up to 1.6 mm deep. |
|
Paul Horn R315.0110.00 AS42 Indexable insert with a cutting width of 1.24 mm (nominal size Nw = 1.1 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0110.00 AS46 Indexable insert with a cutting width of 24.1 mm (nominal size Nw = 1.1 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0110.00 TF45 Indexable insert with a cutting width of 24.1 mm (nominal size Nw = 1.1 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0110.00 TN35 The indexable insert with a cutting width of 1.24 mm is suitable for grooving of the inner and outer contours with up to 2 mm depth. |
|
Paul Horn R315.0120.06 AS45 Indexable insert with a cutting width of 1.2 mm with radius 0.6 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0130.00 AS42 Indexable insert with a cutting width of 1.44 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0130.00 AS46 Indexable insert with a cutting width of 1.44 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0130.00 TF45 Indexable insert with a cutting width of 1.44 mm (nominal size Nw = 1.3 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 2 mm. |
|
Paul Horn R315.0130.00 TN35 The indexable insert with a cutting width of 1.44 mm is suitable for grooving of the inner and outer contours with up to 2 mm depth. |
|
Paul Horn R315.0150.07 AS45 Indexable insert with a cutting width of 1.5 mm with radius 0.75 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0160.00 AS42 Indexable insert with a cutting width of 1.74 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0160.00 AS46 Indexable insert with a cutting width of 1.74 mm (nominal size Nw = 1.6 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0160.00 TN35 The indexable insert with a cutting width of 1.74 mm is suitable for grooving of the inner and outer contours with up to 3 mm in depth. |
|
Paul Horn R315.0160.08 AS45 Indexable insert with a cutting width of 1.6 mm with radius 0.8 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0180.09 AS45 Indexable insert with a cutting width of 1.8 mm with radius of 0.9 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0185.00 AL96 Indexable insert with a cutting width of 1.99 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0185.00 AS42 Indexable insert with a cutting width of 1.99 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0185.00 AS46 Indexable insert with a cutting width of 1.99 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0185.00 TF45 Indexable insert with a cutting width of 1.99 mm (nominal size Nw = 1.85 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0185.00 TN35 The indexable insert with a cutting width of 1.99 mm is suitable for grooving of the inner and outer contours with up to 3 mm in depth. |
|
Paul Horn R315.0200.02 AS42 Indexable insert with a cutting width of 2 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0200.02 AS46 Indexable insert with a cutting width of 2 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0200.02 TN35 The indexable insert with a cutting width of 2 mm is suitable for grooving and copying inner and outer contours with up to 3 mm in depth. |
|
Paul Horn R315.0200.04 AS42 Indexable insert with a cutting width of 2 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0200.04 AS46 Indexable insert with a cutting width of 2 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 3 mm. |
|
Paul Horn R315.0200.04 TN35 The indexable insert with a cutting width of 2 mm is suitable for grooving and copying inner and outer contours with up to 3 mm in depth. |
|
Paul Horn R315.0200.10 AS45 Indexable insert with a cutting width of 2 mm with radius 1 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0215.00 AL96 Indexable insert with a cutting width of 2.29 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0215.00 AS42 Indexable insert with a cutting width of 2.29 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0215.00 AS46 Indexable insert with a cutting width of 2.29 mm (nominal size Nw = 2.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0215.00 TN35 The indexable insert with a cutting width of 2.29 mm is suitable for grooving of the inner and outer contours with up to 4 mm depth. |
|
Paul Horn R315.0220.11 AS45 Indexable insert with a cutting width of 2.2 mm with radius 1.1 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0250.12 AS45 Indexable insert with a cutting width of 2.5 mm with full radius 1.25mm suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0265.00 AL96 Indexable insert with a cutting width of 2.79 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0265.00 AS42 Indexable insert with a cutting width of 2.79 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0265.00 AS46 Indexable insert with a cutting width of 2.79 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0265.00 TF45 Indexable insert with a cutting width of 2.79 mm (nominal size Nw = 2.65 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0265.00 TN35 The indexable insert with a cutting width of 2.79 mm is suitable for grooving of the inner and outer contours with up to 4 mm depth. |
|
Paul Horn R315.0280.14 AS45 Indexable insert with a cutting width of 2.8 mm with radius of 1.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0300.02 AS42 Indexable insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0300.02 AS46 Indexable insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0300.02 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and copying inner and outer contours with up to 4 mm depth. |
|
Paul Horn R315.0300.04 AS42 Indexable insert with a cutting width of 3 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0300.04 AS46 Indexable insert with a cutting width of 3 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 4 mm. |
|
Paul Horn R315.0300.04 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and copying inner and outer contours with up to 4 mm depth. |
|
Paul Horn R315.0300.15 AS45 Indexable insert with a cutting width of 3 mm with radius 1.5 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0315.00 AS42 Indexable insert with a cutting width of 3.29 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0315.00 AS46 Indexable insert with a cutting width of 3.29 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0315.00 TC92 Indexable insert multi-layer coated |
|
Paul Horn R315.0315.00 TF45 Indexable insert with a cutting width of 3.29 mm (nominal size Nw = 3.15 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0315.00 TN35 The indexable insert with a cutting width of 3.29 mm is suitable for grooving of the inner and outer contours with up to 5 mm depth. |
|
Paul Horn R315.0360.18 AS45 Indexable insert with a cutting width of 3.6 mm with radius of 1.8 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.02 AS42 Indexable insert with a cutting width of 4 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.02 AS45 Indexable insert TiAlN nano-composite coated |
|
Paul Horn R315.0400.02 AS46 Indexable insert with a cutting width of 4 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.02 TN35 Indexable insert with a cutting width of 4 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.04 AS42 Indexable insert with a cutting width of 4 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.04 AS46 Indexable insert with a cutting width of 4 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.04 TN35 Indexable insert with a cutting width of 4 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0400.20 AS45 Indexable insert with a cutting width of 4 mm with radius 2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0415.00 AS42 Indexable insert with a cutting width of 29.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0415.00 AS46 Indexable insert with a cutting width of 29.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0415.00 TF45 Indexable insert with a cutting width of 29.4 mm (nominal size Nw = 15.4 mm) is suitable for producing Seegerringnuten DIN 471/472 on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0415.00 TN35 The indexable insert with a cutting width of 4.29 mm is suitable for grooving of the inner and outer contours with up to 5 mm depth. |
|
Paul Horn R315.0500.02 AS45 Indexable insert with a cutting width of 5 mm with corner radius 0.2 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0510.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1 mm. |
|
Paul Horn R315.0510.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1 mm. |
|
Paul Horn R315.0600.04 AS45 Indexable insert with a cutting width of 6 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0610.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1 mm. |
|
Paul Horn R315.0610.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1 mm. |
|
Paul Horn R315.0712.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1.25mm. |
|
Paul Horn R315.0712.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1.25mm. |
|
Paul Horn R315.0800.04 AS45 Indexable insert with a cutting width of 8 mm with corner radius 0.4 mm is suitable for grooving grooves on inner and outer contours with maximum groove depth of 5 mm. |
|
Paul Horn R315.0815.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1.5 mm. |
|
Paul Horn R315.0815.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1.5 mm. |
|
Paul Horn R315.0915.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1.5 mm. |
|
Paul Horn R315.0915.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1.5 mm. |
|
Paul Horn R315.1015.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1.5 mm. |
|
Paul Horn R315.1017.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 1.75 mm. |
|
Paul Horn R315.1017.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 1.75 mm. |
|
Paul Horn R315.1020.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 2 mm. |
|
Paul Horn R315.1020.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 2 mm. |
|
Paul Horn R315.1220.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 2 mm. |
|
Paul Horn R315.1220.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 2 mm. |
|
Paul Horn R315.1320.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 2 mm. |
|
Paul Horn R315.1325.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 2.5 mm. |
|
Paul Horn R315.1325.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 2.5 mm. |
|
Paul Horn R315.1525.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 2.5 mm. |
|
Paul Horn R315.1525.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 2.5 mm. |
|
Paul Horn R315.1630.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.1630.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.1730.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.1830.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.1830.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.1835.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 3.5 mm. |
|
Paul Horn R315.1835.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 3.5 mm. |
|
Paul Horn R315.2135.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 3.5 mm. |
|
Paul Horn R315.2135.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 3.5 mm. |
|
Paul Horn R315.2240.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 4 mm. |
|
Paul Horn R315.2440.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 4 mm. |
|
Paul Horn R315.2750.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 5 mm. |
|
Paul Horn R315.3050.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 5 mm. |
|
Paul Horn R315.3060.01 TN35 The indexable insert with part profile is suitable for threading metric threads with a pitch of 3 mm. |
|
Paul Horn R315.3560.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 6 mm. |
|
Paul Horn R315.3660.02 TN35 The indexable insert full profile is suitable for threading metric threads with a pitch of 6 mm. |
|
Paul Horn R315.5511.02 TH35 The indexable insert full profile is suitable for threading of Whitworth pipe threads with a pitch of 11 threads / inch. |
|
Paul Horn R315.5514.02 TH35 The indexable insert full profile is suitable for threading of Whitworth pipe threads with a pitch of 14 transition / inch. |
|
Paul Horn R315.5519.02 TH35 The indexable insert full profile is suitable for threading of Whitworth pipe threads with a pitch of 19 transition / inch. |
|
Paul Horn R315.5528.02 TH35 The indexable insert full profile is suitable for threading of Whitworth pipe threads with a pitch of 28 transition / inch. |
|
Paul Horn R330.0025.K2 Basic holder as boring bar shank diameter 25.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0025.K3 Basic holder as boring bar shank diameter 25.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0025.K4 Basic holder as boring bar shank diameter 25.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0032.K2 Basic holder as boring bar shank diameter 32.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0032.K3 Basic holder as boring bar shank diameter 32.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0032.K4 Basic holder as boring bar shank diameter 32.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0040.K2 Basic holder as boring bar shank diameter 40.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0040.K3 Basic holder as boring bar shank diameter 40.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R330.0040.K4 Basic holder as boring bar shank diameter 40.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 46.00 mm. |
|
Paul Horn R333.0025.03 Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 43.00 mm. |
|
Paul Horn R333.0025.05 Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 43.00 mm. |
|
Paul Horn R333.0032.03 Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 43.00 mm. |
|
Paul Horn R333.0032.05 Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 43.00 mm. |
|
Paul Horn R333.0040.05 Toolholder as boring bar shank diameter 40.00 mm for receiving indexable inserts Type 312, with the smallest bore diameter 45.00 mm. |
|
Paul Horn R356.1616.0.13.IK Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315, Type law. |
|
Paul Horn R356.1616.0.15.IK Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315, Type law. |
|
Paul Horn R356.1616.03 Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.1616.05 Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.1616.13 Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.1616.15 Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.1616.16 Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 5.3 to 6.4 mm, version right. |
|
Paul Horn R356.1616.2.13.IK Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.1616.2.15.IK Toolholder with shank 16 mm width x 16 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2020.0.13.IK Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2020.0.15.IK Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2020.03 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.2020.05 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.2020.07 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 6.4 to 7.3 mm, version right. |
|
Paul Horn R356.2020.10 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 7.3 to 10.3 mm, version right. |
|
Paul Horn R356.2020.13 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.2020.15 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.2020.16 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 5.3 to 6.4 mm, version right. |
|
Paul Horn R356.2020.17 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 5.3 to 6.4 mm, version right. |
|
Paul Horn R356.2020.2.13 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 10.3 to 13.3 mm, version right. |
|
Paul Horn R356.2020.2.13.IK Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2020.2.15.IK Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2020.45.03 Toolholder with shank 20 mm width x 20 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2525.0.13.IK Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2525.0.15.IK Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2525.03 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.2525.05 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.2525.07 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 6.4 to 7.3 mm, version right. |
|
Paul Horn R356.2525.13 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.2525.15 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.2525.16 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 5.3 to 6.4 mm, version right. |
|
Paul Horn R356.2525.17 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 5.3 to 6.4 mm, version right. |
|
Paul Horn R356.2525.2.13 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 10.3 to 13.3 mm, version right. |
|
Paul Horn R356.2525.2.13.IK Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2525.2.15.IK Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.2525.4.03.IK Toolholder with shank 25 mm width x 25 mm height with integrated internal coolant supply, for parting and grooving for receiving inserts Type 315, Type law. |
|
Paul Horn R356.2525.4.05.IK Toolholder with shank 25 mm width x 25 mm height with integrated internal coolant supply, for parting and grooving for receiving inserts Type 315, Type law. |
|
Paul Horn R356.2525.45.03 Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range of 0 mm, version right. |
|
Paul Horn R356.3232.03 Toolholder with shank 32 mm width x 32 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 3.1 mm, version right. |
|
Paul Horn R356.3232.05 Toolholder with shank 32 mm width x 32 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 0.5 to 5.3 mm, version right. |
|
Paul Horn R356.3232.07 Toolholder with shank 32 mm width x 32 mm height for external grooving and turning for receiving inserts Type 315 with a clamping range from 6.4 to 7.3 mm, version right. |
|
Paul Horn R357.1619.05 Quick clamp holder for installation purposes for receiving inserts Type 315, clamping range 0,5 - 5,3 mm, from bore diameter 50.00 mm, version right. |
|
Paul Horn R357.2020.05 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 315 at maximum penetration depth of 5.00 mm and a clamping range from 0.5 to 5.3 m |
|
Paul Horn R357.2020.15 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 315 at maximum penetration depth of 5.00 mm and a clamping range from 0.5 to 5.3 m |
|
Paul Horn R357.2525.05 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 315 at maximum penetration depth of 5.00 mm and a clamping range from 0.5 to 5.3 mm |
|
Paul Horn R357.2525.15 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 315 at maximum penetration depth of 5.00 mm and a clamping range from 0.5 to 5.3 mm |
|
Paul Horn R360.00C3.K1 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.00C3.K2 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.00C3.K3 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6.00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.00C3.K4 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.00C4.K1 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.00C4.K2 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.00C4.K3 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.00C4.K4 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.00C5.K1 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.00C5.K2 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.00C5.K3 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.00C5.K4 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.00C6.K1 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.00C6.K2 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.00C6.K3 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6.00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.00C6.K4 Tool holders with HORN polygonal shank ISO 26623 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 m |
|
Paul Horn R360.1212.01.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 m |
|
Paul Horn R360.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R360.1212.02.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R360.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 m |
|
Paul Horn R360.1212.03.IK Tool holders with shank 12.00 mm wide x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6.00 mm and a clamping range from 2.9 to 3.9 mm |
|
Paul Horn R360.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, |
|
Paul Horn R360.1616.01.IK Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, |
|
Paul Horn R360.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, |
|
Paul Horn R360.1616.02.IK Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, |
|
Paul Horn R360.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, |
|
Paul Horn R360.1616.03.IK Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, |
|
Paul Horn R360.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, |
|
Paul Horn R360.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 m |
|
Paul Horn R360.2020.01.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 m |
|
Paul Horn R360.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R360.2020.02.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R360.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 m |
|
Paul Horn R360.2020.03.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 m |
|
Paul Horn R360.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 m |
|
Paul Horn R360.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm |
|
Paul Horn R360.2525.01.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm |
|
Paul Horn R360.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm |
|
Paul Horn R360.2525.02.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm |
|
Paul Horn R360.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm |
|
Paul Horn R360.2525.03.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm |
|
Paul Horn R360.2525.04 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm |
|
Paul Horn R360.3232.01 Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm |
|
Paul Horn R360.3232.02 Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm |
|
Paul Horn R360.3232.03 Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm |
|
Paul Horn R360.3232.04 Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm |
|
Paul Horn R360.TS40.K1 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.TS40.K2 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.TS40.K3 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.TS40.K4 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.TS50.K1 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.TS50.K2 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.TS50.K3 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.TS50.K4 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R360.TS63.K1 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R360.TS63.K2 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, version right. |
|
Paul Horn R360.TS63.K3 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, version right. |
|
Paul Horn R360.TS63.K4 Tool holders with HORN shaft TS ISO 26622 for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, version right. |
|
Paul Horn R361.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range of 0.5-1.9 mm, ve |
|
Paul Horn R361.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R361.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 m |
|
Paul Horn R368.1212.08 Tool holders with shank 12.00 mm Width x 12.00 mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1212.08.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1212.11 Tool holders with shank 12.00 mm Width x 12.00 mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1212.11.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1616.08 Tool holders with shank 16.00mm width x 16.00mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1616.08.IK Tool holders with shank 16.00mm width x 16.00mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1616.11 Tool holders with shank 16.00mm width x 16.00mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.1616.11.IK Tool holders with shank 16.00mm width x 16.00mm height for tapping for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.2608.08 Toolholder as Abstechschwert 8:00 mm wide x 26.00 mm height for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.2608.10.01 Toolholder as Abstechschwert 8:00 mm wide x 26.00 mm height for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range of 0 mm, version right. |
|
Paul Horn R368.2608.11 Toolholder as Abstechschwert 8:00 mm wide x 26.00 mm height for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.3208.08 Toolholder as Abstechschwert 8:00 mm wide x 32.00 mm height for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R368.3208.11 Toolholder as Abstechschwert 8:00 mm wide x 32.00 mm height for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.9 mm, version right. |
|
Paul Horn R369.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 m |
|
Paul Horn R369.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 m |
|
Paul Horn R369.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 m |
|
Paul Horn R369.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 m |
|
Paul Horn R369.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm |
|
Paul Horn R369.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm |
|
Paul Horn R369.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm |
|
Paul Horn R369.2525.04 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm |
|
Paul Horn R381.0063.05 Routers disc for milling in inner and outer contours with a cutting diameter of 63 mm and 5 blades (type 314) with a maximum groove depth of 5 mm and 6 mm slot width, Fräsdorndurchmesser is 22 mm, ve |
|
Paul Horn R381.0080.08 Routers disc for milling in inner and outer contours with a cutting diameter of 80 mm and 8 blades (type 314) with a maximum groove depth of 5 mm and 6 mm slot width, Fräsdorndurchmesser is 27 mm, ve |
|
Paul Horn R381.0100.10 Routers disc for milling in inner and outer contours with a cutting diameter of 100 mm and 10 blades (type 314) with a maximum groove depth of 5 mm and 6 mm slot width, Fräsdorndurchmesser is 32 mm, |
|
Paul Horn R381.T080.16.04 Schlagmesser for producing polygons on lathes with a cutting diameter of 80 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for TRAUB TNL18, execution law. |
|
Paul Horn R381.X073.16.03 Schlagmesser for producing polygons on lathes with a cutting diameter of 73.5 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for INDEX MS25, execution law. |
|
Paul Horn R381.X073.16.04 Schlagmesser for producing polygons on lathes with a cutting diameter of 73.5 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for INDEX MS25, execution law. |
|
Paul Horn R381.X090.27.04 Schlagmesser for producing polygons on lathes with a cutting diameter of 90 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for ABC index, execution law. |
|
Paul Horn R390.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 m |
|
Paul Horn R390.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm, |
|
Paul Horn R390.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 m |
|
Paul Horn R390.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 3.90 m |
|
Paul Horn R390.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width from 5.30 |
|
Paul Horn R390.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm |
|
Paul Horn R390.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 3.90 mm |
|
Paul Horn R390.2525.04 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width from 5.30 |
|
Paul Horn R390.3232.02 Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm |
|
Paul Horn R390.3232.04 Tool holders type |
|
Paul Horn R391.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 m |
|
Paul Horn R391.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 mm, |
|
Paul Horn R391.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 m |
|
Paul Horn R391.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 mm |
|
Paul Horn R406.063.U.04 AS4B TiAlN coated carbide insert R406.063.U.04 to Tangentialfräsen, usable with 4 cutting edges |
|
Paul Horn R406.063.U.08 AS4B TiAlN coated carbide insert R406.063.U.08 to Tangentialfräsen, usable with 4 cutting edges |
|
Paul Horn R409.093.U.04 AS4B Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius 0.4 mm, suitable milling body M409, execution law. |
|
Paul Horn R409.093.U.08 AS4B Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius of 0.8 mm, suitable milling body M409, execution law. |
|
Paul Horn R409.093.U.12 AS4B Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius of 1.2 mm, suitable milling body M409, execution law. |
|
Paul Horn R64 Einbauhalter Graf adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 1.90 mm, version right. |
|
Paul Horn R64IK Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 1.90 mm, version right. |
|
Paul Horn R65 Einbauhalter Graf adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 2.90 mm, version right. |
|
Paul Horn R65IK Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 2.90 mm, version right. |
|
Paul Horn R76IK Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 274 at maximum penetration depth of 6.00 mm and a maximum groove width of 3.00 mm, version right. |
|
Paul Horn R849.0012R.50.K2 Boring recording for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, cutting insert to type 105, execution law. |
|
Paul Horn R849.0016R.50.K2 Boring recording for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, cutting insert to type 105, execution law. |
|
Paul Horn R849.0020R.50.K2 Boring recording for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, cutting insert to type 105, execution law. |
|
Paul Horn R849.0220R.41.00 Cartridge receiving machines specifically for SchГјtte multi-spindle series SCX for receiving cash tablets type 220, suitable for basic holder type 849, execution law. |
|
Paul Horn R849.0220R.49.00 Cartridge receiving machines specifically for SchГјtte multi-spindle series SCX for receiving cash tablets type 220, suitable for basic holder type 849, execution law. |
|
Paul Horn R849.0226R.00.03 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution law. |
|
Paul Horn R849.0226R.00.04 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution law. |
|
Paul Horn R849.0226R.00.05 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution law. |
|
Paul Horn R849.0226R.00.07 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution law. |
|
Paul Horn R849.2608R.13.00 Sword Shot for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to Abstechschwert height 26 mm, version right. |
|
Paul Horn R849.SCLCR.09.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SCLCR09 ..., execution law. |
|
Paul Horn R849.SCLCR.12.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SCLCR12 ..., execution law. |
|
Paul Horn R849.SDJCR.11.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SDJCR11 ..., execution law. |
|
Paul Horn R849.SDNCR.11.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SDNCR11 ..., execution law. |
|
Paul Horn R849.SVJBL.16.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SVJBL16 ..., execution law. |
|
Paul Horn R849.SVJBR.16.00 Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, fits to DIN / ISO indexable inserts SVJBR16 ..., execution law. |
|
Paul Horn R940.X842.5862.L.IK Piercing holding piece, height adjustable, right version, for cassette type LNK100.0842 ... |
|
Paul Horn R940.X842.5862.R.IK Piercing holding piece, height adjustable, right version, for cassette type RNK100.0842 ... |
|
Paul Horn R99 Einbauhalter Graf |
|
Paul Horn R990.X845.8698.L.IK Piercing holding piece height adjustable, the maximum cutting depth is 34 mm and 3 mm groove width, right indexable insert type S100, execution law. |
|
Paul Horn R990.X845.8698.R.IK Piercing holding piece height adjustable, the maximum cutting depth is 34 mm and 3 mm groove width, right indexable insert type S100, execution law. |
|
Paul Horn R991.X845.73102.L.IK Piercing holding piece for height adjustable inputs and Abstechsystem 960, matching base holder 776 457 (index) |
|
Paul Horn R991.X845.73102.R.IK Piercing holding piece for height adjustable inputs and Abstechsystem 960, matching base holder 776 457 (index) |
|
Paul Horn RA105.1020.10.2.2 TI25 Insert with a cutting width of 2 mm with radius 1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA105.1020.2.2 TI25 Insert with a cutting width of 2 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA105.1025.12.2.2 TI25 Insert with a cutting width of 2.5 mm with corner radius 1.25mm suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA105.1025.2.2 TI25 Insert with a cutting width of 2.5 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA105.1030.15.2.2 TI25 Insert with a cutting width of 3 mm with radius 1.5 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA105.1030.2.2 TI25 Insert with a cutting width of 3 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm. |
|
Paul Horn RA109.1520.3.2 TI25 Insert with a cutting width of 2 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA109.1525.3.2 TI25 Insert with a cutting width of 2.5 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA109.1530.3.2 TI25 Insert with a cutting width of 3 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA110.2030.15.5.0 TN35 Insert with a cutting width of 3 mm with radius 1.5 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm. |
|
Paul Horn RA110.2030.3.0 TH35 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA110.2030.3.0 TI25 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA110.2030.3.0 TN35 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA110.2030.5.0 TH35 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm. |
|
Paul Horn RA110.2030.5.0 TI25 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm. |
|
Paul Horn RA110.2030.5.0 TN35 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm. |
|
Paul Horn RA110.5030.3.0 TI25 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 50 mm with a maximum groove depth of 20 mm. |
|
Paul Horn RA110.5030.5.0 TI25 Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 50 mm with a maximum groove depth of 30 mm. |
|
Paul Horn RA210.20.1318.14 Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, m |
|
Paul Horn RA210.20.1318.15 Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, m |
|
Paul Horn RA210.20.9513.14 Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matc |
