Paul Horn RH223.1010.03 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 8:00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution law. |
Paul Horn RH223.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution law. |
Paul Horn RH223.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution law. |
Paul Horn RH223.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution law. |
Paul Horn RH223.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.2608.01 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.2608.02 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 2:50 mm matching insert type S223, execution law. |
Paul Horn RH223.2608.03 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH223.3208.01 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 2:00 mm matching insert type S223, execution law. |
Paul Horn RH223.3208.03 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 3.00mm matching insert type S223, execution law. |
Paul Horn RH224.1212.20.61 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.20.61IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.20.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.20.62.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.20.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.20.63.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.21.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.22 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.22.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.23 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.23.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.61 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.61.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.62.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.63.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.64 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1212.81 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 8.20 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1608.02 Tool holders with shank 8:00 mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1608.23 Tool holders with shank 8:00 mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.03.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.04.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.05.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.24.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.0.25.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.01.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.02.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.03.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.05 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.03.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.04.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.05.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.24.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.2.25.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.21.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.22 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.22.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.23 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.23.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.24 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.25 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.26 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.3.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.61 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.61.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.62 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.62.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.63 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.63.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.64 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.65 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.1616.66 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.03.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.04.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.05.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.24.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.0.25.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.01IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.02.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.03.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.05 Tool holders with shank 20.00 mm wide x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 5.10 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.06 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.03.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.04.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.05.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.24.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.2.25.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.21 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.21.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.22 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.22.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.23 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.23.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.24 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.25 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.26 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.3.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.61 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.61.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.62 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.62.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.63 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.63.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.64 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2020.66 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.03.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.04.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.05.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.24.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.0.25.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.01.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.02.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.03.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.04 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.05 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.06 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.6 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.03.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.04.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.05.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.24.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.2.25.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.21 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.21.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.22 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.22.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.23 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.23.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.24 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.25 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.26 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18.00 mm, groove width 6.10 mm matching insert type S224, execution law. |
Paul Horn RH224.2525.3.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.01 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.02 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.03 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.81 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.81R Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.82 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.82R Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.83 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.2608.83R Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.3208.01 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution law. |
Paul Horn RH224.3208.02 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution law. |
Paul Horn RH224.3208.03 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.3208.83R Toolholder with shank 7.90 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 21:00 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.3208.93 Tool holders with shank 8:00 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 32.5 mm, groove width 3.70 mm matching insert type S224, execution law. |
Paul Horn RH224.4520.02 Toolholder with shank 20 mm width x 20 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 2.8 mm matching cutting board only full radius type S224, execution law. |
Paul Horn RH224.4520.04 Toolholder with shank 20 mm width x 20 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 4.4 mm matching cutting board only full radius type S224, execution law. |
Paul Horn RH224.4525.02 Toolholder with shank 25 mm width x 25 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 2.8 mm matching cutting board only full radius type S224, execution law. |
Paul Horn RH224.4525.04 Toolholder with shank 25 mm width x 25 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 4.4 mm matching cutting board only full radius type S224, execution law. |
Paul Horn RH224202065 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, slot width 10.5 mm matching insert type S224, execution law. |
Paul Horn RH259.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and turning in brass, maximum groove depth 11:00 mm, groove width 3.00mm matching insert type 259, execution law. |
Paul Horn RH259.1616.13 Tool holders with shank 16.00 mm wide x 16.00 mm height for Einstechen- and turning in brass, maximum groove depth 18.00 mm, groove width 4.00 mm matching insert type 259, execution law. |
Paul Horn RH259.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and turning in brass, maximum groove depth 11:00 mm, groove width 3.00mm matching insert type 259, execution law. |
Paul Horn RH259.2020.13 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and turning in brass, maximum groove depth 18:00 mm, groove width 4:00 mm matching insert type 259, execution law. |
Paul Horn RH259.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and turning in brass, maximum groove depth 11:00 mm, groove width 3.00mm matching insert type 259, execution law. |
Paul Horn RH264.0808.01 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.0808.51 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.01 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.02 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.11 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.12 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.61 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1010.62 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 5:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.11 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.12 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.13 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.14 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 13:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.22 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.23 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.24 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1212.64 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 5:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.11 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.12 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.13 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.14 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 13:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.22 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.23 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.1616.24 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.01 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.11 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.12 Tool holders type |
Paul Horn RH264.KM16.13 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 10.00 mm, groove width 2.50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.14 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.21 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 13:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH264.KM16.23 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type 264 / S264, execution law. |
Paul Horn RH274.0808.04 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.0808.SF.04 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.0808.SF.S4 Toolholder with shank 8 mm wide x 8 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1010.04 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1010.04.E Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1010.6.04 Toolholder with shank 10 mm width x 10 mm height for Einstechen- and longitudinal turning, maximum groove depth 6 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1010.SF.04 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1010.SF.S4 Toolholder with shank 10 mm width x 10 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1212.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1212.04.E Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1212.6.04 Toolholder with shank 12 mm width x 12 mm height for Einstechen- and longitudinal turning, maximum groove depth 6 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1212.SF.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1212.SF.S4 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1214.07 Tool holders with shank 14.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 7:00 mm matching insert type 274, execution law. |
Paul Horn RH274.1414.04 Tool holders with shank 14.00 mm Width x 14.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.1616.04.E Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.2020.04.E Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RH274.A022.09.04 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert type 274, execution law. |
Paul Horn RH274.A022.09.07 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, slot width 7 mm fits STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert type 274, execution law. |
Paul Horn RH274.A022.12.04 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert type 274, execution law. |
Paul Horn RH274.A022.12.07 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, slot width 7 mm fits STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert type 274, execution law. |
Paul Horn RH274.A022.16.04 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert type 274, execution law. |
Paul Horn RH274.KM16.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 2:00 mm matching insert type 274, execution law. |
Paul Horn RH316.1616.S3.03 Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution law. |
Paul Horn RH316.2020.S3.03 Tool holders with shank 20.00 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution law. |
Paul Horn RH316.2020.S3.03.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, right version. |
Paul Horn RH316.2020.S5.05.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, right version. |
Paul Horn RH316.2525.S3.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution law. |
Paul Horn RH316.2525.S3.03.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, right version. |
Paul Horn RH316.2525.S5.05.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, right version. |
Paul Horn RH316.3225.S3.03 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution law. |
Paul Horn RH34T.1616.4.10.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.1616.4.20.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2020.4.10.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2020.4.20.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2020.4.30.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2020.4.40.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2525.4.10.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2525.4.20.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2525.4.30.IK Toolholder square shaft with internal cooling |
Paul Horn RH34T.2525.4.40.IK Toolholder square shaft with internal cooling |
Paul Horn RHC105.0707.21 Tool holders with shank 7:00 mm width x height mm 7:00 for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.0710.21 Basic holder for TORNOS DECO 7/10 for receiving inserts Type 105, Type law. |
Paul Horn RHC105.0710.41 Basic holder for TORNOS DECO 7/10 for receiving inserts Type 105, Type law. |
Paul Horn RHC105.0808.21 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1010.11 Toolholder with shaft 10:00 mm width x height mm 10:00 for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1010.21 Toolholder with shaft 10:00 mm width x height mm 10:00 for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1010.41 Toolholder with shaft 10:00 mm width x height mm 10:00 for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1212.41 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.1616.41 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type law. |
Paul Horn RHC105.MD1414.2.10 Tool holders for internal glossy turning from bore diameter 13:50 mm for receiving inserts type 105 ... MD, execution law. |
Paul Horn RHC114.1212.01 Toolholder for external machining with shank 12 mm width x 12 mm height for receiving inserts Type 114, Type law. |
Paul Horn RHC114.1616.01 Toolholder for external machining with shank 16.00mm width x 16.00mm height for receiving inserts Type 114, Type law. |
Paul Horn RHC114.2020.01 Toolholder for external machining with shank 20.00 mm Width x 20.00 mm height for receiving inserts Type 114, Type law. |
Paul Horn RHC114.2525.01 Toolholder for external machining with shank 25.00 mm wide x 25.00 mm height for receiving inserts Type 114, Type law. |
Paul Horn RHC274.0020.1.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 4 mm, groove width 3 mm matching insert type 274, execution law. |
Paul Horn RHC274.KM16.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 2:00 mm matching insert type 274, execution law. |
Paul Horn RHC274.KM16.90.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 2:00 mm matching insert type 274, execution law. |
Paul Horn RHC316.1616.03 Tool holders type |
Paul Horn RHC316.1616.S3.03 Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2020.03 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2020.05 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2020.S3.03 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2525.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2525.05 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.2525.S3.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.3225.03 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.3225.05 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RHC316.3225.S3.03 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution law. |
Paul Horn RIB25A.20.2025.02.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable in |
Paul Horn RIB25A.20.2025.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 3 mm, matching indexable in |
Paul Horn RIB25A.20.2025.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 4 mm, matching indexable in |
Paul Horn RIB25A.20.2530.02.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable in |
Paul Horn RIB25A.20.2530.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable in |
Paul Horn RIB25A.20.2530.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 17 mm and a maximum groove width of 4 mm, matching indexable in |
Paul Horn RIB25A.20.3040.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 3 mm, matching indexable in |
Paul Horn RIB25A.20.3040.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 4 mm, matching indexable in |
Paul Horn RIB25A.20.4050.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 18 mm and a maximum groove width of 3 mm, matching indexable in |
Paul Horn RIB25A.20.4050.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 20 mm and a maximum groove width of 4 mm, matching indexable in |
Paul Horn RIK220.1318.04 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1318.05 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1318.06 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1318.14 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.1318.15 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.1318.16 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.1830.04 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1830.05 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1830.06 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.1830.14 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.1830.15 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.1830.16 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law |
Paul Horn RIK220.3000.04 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.3000.05 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.6075.05 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.6075.06 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.6575.04 Cassette for axial grooving from 65.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.6575.14 Cassette for axial grooving from 65.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.04 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.05 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 17.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.06 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 17.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.14 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.15 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.7595.16 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.9513.04 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.9513.05 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.9513.06 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.9513.14 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK220.9513.15 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 229, execution law. |
Paul Horn RIK224.1113.03 Cassette for axial grooving from 110.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1318.03 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1318.04 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1318.05 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1318.06 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1830.03 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1830.04 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1830.05 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.1830.06 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.3000.04 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.3000.05 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.3000.06 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.3847.04 Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.3847.05 Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.4760.04 Cassette for axial grooving of 47.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.4760.05 Cassette for axial grooving of 47.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.5060.03 Cassette for axial grooving from 50.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.6075.03 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.6075.04 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.6075.05 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.7590.03 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.7590.04 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.7590.05 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.7590.06 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.9011.03 Cassette for axial grooving of 90.00 to 110.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.9013.04 Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RIK224.9013.05 Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type 224, execution law. |
Paul Horn RK360.00.01 Cassette type, width: 12.00 mm, max. |
Paul Horn RK360.00.02 Cassette type, width: 12.00 mm, max. |
Paul Horn RK360.00.03 Cassette type, width: 12.00 mm, max. |
Paul Horn RK360.00.04 Cassette type, width: 12.00 mm, max. |
Paul Horn RKT274.2445.04 Einbauhalter for piercing with a maximum groove width of 3 mm, matching indexable insert type 274, execution law. |
Paul Horn RM274.0080.S27.7.13 Cutterhead type |
Paul Horn RM274.0119.S40.7.19 Cutterhead type |
Paul Horn RM275.0058.S22.10 Routers disc fits Fräsdorndurchmesser of 22 mm, maximum groove width of 5.15 and cutting circle diameter of 58 mm is suitable for Nutzirkularfräsen of inner and outer contours with maximum groove de |
Paul Horn RM275.0078.S27.14 Routers disc fits Fräsdorndurchmesser of 27 mm, maximum groove width of 5.15 and cutting circle diameter of 78 mm is suitable for Nutzirkularfräsen of inner and outer contours with maximum groove de |
Paul Horn RM275.0098.S32.16 Routers disc fits Fräsdorndurchmesser of 32 mm, maximum groove width of 5.15 and cutting circle diameter of 98 mm is suitable for Nutzirkularfräsen of inner and outer contours with maximum groove de |
Paul Horn RM275.D040.10.04 Schlagmesser for producing polygons on lathes with a cutting diameter of 40 mm suitable for Type 275 at maximum penetration depth of 3 mm, machine specific for DECO 7/10, execution law. |
Paul Horn RM275.T064.33.03 Schlagmesser for producing polygons on lathes with a cutting diameter of 64 mm suitable for Type 275 at maximum penetration depth of 3 mm, machine specific for TNL12-7 counter spindle, execution law. |
Paul Horn RNK100.0840.1.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 2.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.1.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.1.03 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.1.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.1.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.3.02 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0840.3.03 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0842.16.4.72.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2.5 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.16.4.73.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 3 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.16.5.71.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.17.5.71.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.23.3.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.23.4.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.24.4.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.26.4.73.IK Cassette for grooving and parting at a penetration depth of 27 mm and a maximum groove width of 3 mm, matching indexable insert type S100, right version |
Paul Horn RNK100.0842.27.4.73.IK Cassette for grooving and parting at a penetration depth of 27 mm and a maximum groove width of 3 mm, matching insert type S100, right version |
Paul Horn RNK100.0842.34.4.73.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 3 mm, matching indexable insert type S100, right version |
Paul Horn RNK100.0842.34.4.74.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 4 mm, matching indexable insert type S100, right version |
Paul Horn RNK100.0845.22.4.72.IK Cassette for grooving and parting at a penetration depth of 22 mm and a maximum groove width of 2.5 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.26.4.73.IK Cassette for grooving and parting at a penetration depth of 26 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.34.4.73.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.34.4.74.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.42.4.73.IK Cassette for grooving and parting at a penetration depth of 42 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.42.4.74.IK Cassette for grooving and parting at a penetration depth of 42 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.46.4.74.IK Cassette for grooving and parting at a penetration depth of 46 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.0845.55.4.74.IK cassette |
Paul Horn RNK100.3215.23 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.3215.24 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.5625.02L Cassette for grooving and parting at a penetration depth of 26.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.5625.03L Cassette for grooving and parting at a penetration depth of 26.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.7025.02L Cassette for grooving and parting at a penetration depth of 26.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.7025.03L Cassette for grooving and parting at a penetration depth of 26.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.1050.40 Cassette for grooving and parting at a penetration depth of 51 mm and a clamping range of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.1051.30 Cassette for grooving and parting at a penetration depth of 51 mm and a clamping range of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.4221.20 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 2 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.5226.30 Cassette for grooving and parting at a penetration depth of 26 mm and a clamping range of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.8241.30 Cassette for grooving and parting at a penetration depth of 41 mm and a clamping range of 3 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK100.956.8241.40 Cassette for grooving and parting at a penetration depth of 41 mm and a clamping range of 4 mm, matching indexable insert type S100, execution law. |
Paul Horn RNK220.3215.03 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.03.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.04 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.04.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.05 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.05.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.06 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3215.06.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.13 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range of 0 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.13.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.14 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range of 0 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.14.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.15 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range of 0 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.15.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.16 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range of 0 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK220.3218.16.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution law. |
Paul Horn RNK224.0840.1.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.0 to 2.4 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.0840.1.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.4 to 2.8 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.0840.1.03 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.8 to 3.7 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.0840.1.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 3.7 to 4.4 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.0840.1.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 4.4 to 5.1 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.0840.1.06 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 5.1 to 6.0 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.0 to 2.4 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.4 to 2.8 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.03 Cassette for grooving and parting at a penetration depth of 18.00 mm and a clamping range from 2.8 to 3.7 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 3.7 to 4.4 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 4.4 to 5.1 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.3215.06 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 5.1 to 6.0 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.956.3216.20 Cassette for grooving and parting at a penetration depth of 16 mm and a clamping range of 2 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.956.3216.30 Cassette for grooving and parting at a penetration depth of 16 mm and a clamping range of 3 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.956.4221.20 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 2 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK224.956.4221.30 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 3 mm, matching indexable insert type S224, execution law. |
Paul Horn RNK229.956.0021.60 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 6 mm, matching indexable insert type S229, execution law. |
Paul Horn RNK229.956.5225.30 Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range of 3 mm, matching indexable insert type S229, execution law. |
Paul Horn RNK229.956.5225.40 Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range of 4 mm, matching indexable insert type S229, execution law. |
Paul Horn RNK229.956.6518.60 Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range of 6 mm, matching indexable insert type S229, execution law. |
Paul Horn RNK264.0840.1.01 Cassette for grooving and parting at a penetration depth from 13.00 mm and a clamping range of 1.5 mm, matching indexable insert type 264 / S264, execution law. |
Paul Horn RNK264.0840.1.02 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 2 mm, matching indexable insert type 264 / S264, execution law. |
Paul Horn RNK264.0840.1.03 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 2.5 mm, matching indexable insert type 264 / S264, execution law. |
Paul Horn RNK264.0840.1.04 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 3 mm, matching indexable insert type 264 / S264, execution law. |
Paul Horn RNK274.0840.1.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 0.5 to 4 mm, matching indexable insert type 274, execution law. |
Paul Horn RNK356.0220.03.IK Cassette type |
Paul Horn RNK356.0220.05 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.1 to 5.4 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0220.05.IK Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range of 0 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0220.15 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.1 to 5.4 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0220.23.IK Cassette type |
Paul Horn RNK356.0220.25.IK Cassette type |
Paul Horn RNK356.0840.1.05 Cassette for grooving and parting at a penetration depth of 5 mm and a clamping range from 3.25 to 5.45 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0840.1.07 Cassette for grooving and parting at a penetration depth of 5 mm and a clamping range from 6.60 to 7.50 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0840.1.16 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 5.45 to 6.60 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.0840.1.17 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 6.60 to 7.50 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK356.1220.16 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 1.1 to 6.6 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0220.01 Cassette for grooving and parting at a penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0220.02 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0220.03 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0220.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0840.1.01 Cassette for grooving and parting at a penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0840.1.02 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0840.1.03 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK360.0840.1.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK368.0840.1.08 Cassette for grooving and parting at a penetration depth from 8.00 mm and a clamping range from 0.5 to 1.2 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RNK368.0840.1.11 Cassette for grooving and parting at a penetration depth from 8.00 mm and a clamping range of 1.2 - 1,5 mm, matching indexable insert type 312 / S312, execution law. |
Paul Horn RPGT0802M0.F.HN PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 8 mm. |
Paul Horn RPGT0802M0.F.HS PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 8 mm. |
Paul Horn RPGT1003M0.F.HN PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 10 mm. |
Paul Horn RPGT1003M0.F.HS PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 10 mm. |
Paul Horn RPGT120400.F.HN PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12.7 mm. |
Paul Horn RPGT120400.F.HS PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12.7 mm. |
Paul Horn RPGT1204M0.F.HN PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12 mm. |
Paul Horn RPGT1204M0.F.HS PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12 mm. |
Paul Horn RPGW0802M0.F.H0 PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 8 mm. |
Paul Horn RPGW1003M0.F.H0 PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 10 mm. |
Paul Horn RPGW120400.F.H0 PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12.7 mm. |
Paul Horn RPGW1204M0.F.H0 PD70 Insert PCD-tipped, round, for machining non-ferrous metals and carbon fiber materials, diameter 12 mm. |
Paul Horn RS100.0520.E2 TF43 The insert with a cutting width of 2 mm is suitable for tapping. |
Paul Horn RS100.0520.E2 TF45 The insert with a cutting width of 2 mm is suitable for tapping. |
Paul Horn RS100.0520.E2 TF46 The insert with a cutting width of 2 mm is suitable for tapping. |
Paul Horn RS100.0520.E2 TI22 The insert RS100.0520.E2 Ti22 with a cutting width of 2 mm is suitable for tapping. |
Paul Horn RS100.0520.F2 TF45 Insert for butzenarmen parting with a cutting width of 2 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0520.F2 TF46 Insert for butzenarmen parting with a cutting width of 2 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0525.E2 TC93 Insert to butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0525.E2 TF43 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0525.E2 TF45 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0525.E2 TF46 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0525.F2 TF45 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, execution law. |
Paul Horn RS100.0530.E2 TC92 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TC93 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TF42 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TF43 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TF45 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TF46 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.E2 TI22 The insert RS100.0530.E2 Ti22 with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.EN2 AS62 The insert with a cutting width of 3 mm is suitable for tapping. |
Paul Horn RS100.0530.EN2 AS66 Insert for butzenarmen parting with a cutting width of 3 mm and a corner radius of 0.2 mm, with geometry EN and Abstechschräge 5 °, execution law. |