Paul Horn L381.S098.30.02
Schlagmesser for producing polygons on lathes with a cutting diameter of 98 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for SG20 / SF26, -S, -L / SE18 / AF26,32
Paul Horn L381.S098.30.03
Schlagmesser for producing polygons on lathes with a cutting diameter of 98 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for SG20 / SF26, -S, -L / SE18 / AF26,32
Paul Horn L381.S118.30.02
Schlagmesser for producing polygons on lathes with a cutting diameter of 118 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for SF32,42,51,67 / AF42, execution neu
Paul Horn L381.S118.30.03
Schlagmesser for producing polygons on lathes with a cutting diameter of 118 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for SF32,42,51,67 / AF42, execution neu
Paul Horn L381.T069.12.04
Schlagmesser for producing polygons on lathes with a cutting diameter of 69 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for TNL12-7 / TNL26 / TNK36, execution L
Paul Horn L381.X090.27.04
Schlagmesser for producing polygons on lathes with a cutting diameter of 90 mm and 3 flutes (type 314) with maximum penetration depth of 5 mm, machine specific for Index ABC, version Left.
Paul Horn L389.D014.40.06
Whirling head for external thread whirling with a cutting diameter of 14 mm and 6 flutes (type 314) to fit Tornos Deco 2000 / 20a, execution Links.
Paul Horn L390.1212.02
Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 m
Paul Horn L390.1616.02
Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm,
Paul Horn L390.2020.02
Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 m
Paul Horn L390.2020.03
Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 3.90 m
Paul Horn L390.2020.04
Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width from 5.30
Paul Horn L390.2525.01
Toolholder with shank 25 mm width x 25 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 8 mm and a maximum groove width of 1.9 mm, Model Links
Paul Horn L390.2525.02
Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm
Paul Horn L390.2525.03
Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 3.90 mm
Paul Horn L390.2525.04
Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width from 5.30
Paul Horn L390.3232.02
Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 2.90 mm
Paul Horn L390.3232.04
Tool holders with shank 32.00 mm wide x 32.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width from 5.30
Paul Horn L391.1212.01
Tool holders with shank 12.00 mm Width x 12.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 m
Paul Horn L391.1616.01
Tool holders with shank 16.00mm width x 16.00mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 mm,
Paul Horn L391.2020.01
Tool holders with shank 20.00 mm Width x 20.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 m
Paul Horn L391.2525.01
Tool holders with shank 25.00 mm wide x 25.00 mm height for external grooving and turning for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a maximum groove width of 1.90 mm
Paul Horn L406.063.U.04 AS4B
TiAlN coated carbide insert L406.063.U.08 to Tangentialfräsen, usable with 4 cutting edges
Paul Horn L409.093.U.04 AS4B
Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius 0.4 mm, suitable milling body M409, version Left.
Paul Horn L409.093.U.08 AS4B
Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius of 0.8 mm, suitable milling body M409, version Left.
Paul Horn L409.093.U.12 AS4B
Indexable insert to Tangentialfräsen with 4 cutting edges with a cutting length of 9.3 mm and a corner radius of 1.2 mm, suitable milling body M409, version Left.
Paul Horn L64
Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 1.90 mm, Model Links.
Paul Horn L64IK
Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 1.90 mm, Model Links.
Paul Horn L65
Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 2.90 mm, Model Links.
Paul Horn L65IK
Einbauhalter Graf height adjustable for external grooving and turning for receiving inserts Type 312 at maximum penetration depth of 4.00 mm and a maximum groove width of 2.90 mm, Model Links.
Paul Horn L760.0013.K1
Basic holder machines specifically for TORNOS DECO13 parting for receiving inserts Type 312 at maximum penetration depth from 8.00 mm and a clamping range from 0.5 to 1.2 mm, Model Links.
Paul Horn L760.2026.K1
Basic holder machines specifically for TORNOS DECO20 / 26 for tapping for receiving inserts Type 312 at maximum penetration depth of 15 mm and a clamping range of 0 mm, Model Links.
Paul Horn L849.0220L.41.00
Cartridge receiving machines specifically for SchГјtte multi-spindle series SCX for receiving cash tablets type 220, suitable for basic holder Type 849, Type Links.
Paul Horn L849.0220L.49.00
Cartridge receiving machines specifically for SchГјtte multi-spindle series SCX for receiving cash tablets type 220, suitable for basic holder Type 849, Type Links.
Paul Horn L849.0226L.00.03
Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution Links.
Paul Horn L849.0226L.00.04
Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution Links.
Paul Horn L849.0226L.00.05
Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution Links.
Paul Horn L849.0226L.00.07
Cassette for SchГјtte multi-spindle series SCX for inclusion in the base holder type 849, maximum penetration depth 25.00 mm, indexable insert to type 229, execution Links.
Paul Horn L940.X842.5862.L.IK
Piercing holding piece height adjustable, left, for cassette type LNK100.0842 ...
Paul Horn L940.X842.5862.R.IK
Piercing holding piece, height adjustable, left, for cassette type RNK100.0842 ...
Paul Horn L99
Einbauhalter Graf
Paul Horn L990.X845.8698.L.IK
Piercing holding piece height adjustable, the maximum cutting depth is 34 mm and 3 mm groove width, right indexable insert type S100, execution Links.
Paul Horn L990.X845.8698.R.IK
Piercing holding piece height adjustable, the maximum cutting depth is 34 mm and 3 mm groove width, right indexable insert type S100, execution Links.
Paul Horn L991.X845.73102.L.IK
Piercing holding piece for height adjustable inputs and Abstechsystem 960, matching base holder 776 457 (index)
Paul Horn L991.X845.73102.R.IK
Piercing holding piece for height adjustable inputs and Abstechsystem 960, matching base holder 776 457 (index)
Paul Horn LA105.1020.10.2.2 TI25
Insert with a cutting width of 2 mm with radius 1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA105.1020.2.2 TI25
Insert with a cutting width of 2 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA105.1025.12.2.2 TI25
Insert with a cutting width of 2.5 mm with full radius 1.25mm suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA105.1025.2.2 TI25
Insert with a cutting width of 2.5 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA105.1030.15.2.2 TI25
Insert with a cutting width of 3 mm with radius 1.5 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA105.1030.2.2 TI25
Insert with a cutting width of 3 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 10 mm with a maximum groove depth of 15 mm.
Paul Horn LA109.1520.3.2 TI25
Insert with a cutting width of 2 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm.
Paul Horn LA109.1525.3.2 TI25
Insert with a cutting width of 2.5 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm.
Paul Horn LA109.1530.3.2 TI25
Insert with a cutting width of 3 mm with corner radius 0.1 mm is suitable for axial grooving of grooves from outer groove diameter 15 mm with a maximum groove depth of 20 mm.
Paul Horn LA110.2030.15.5.0 TN35
Insert with a cutting width of 3 mm with radius 1.5 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm.
Paul Horn LA110.2030.3.0 TH35
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm.
Paul Horn LA110.2030.3.0 TI25
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm.
Paul Horn LA110.2030.3.0 TN35
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 20 mm.
Paul Horn LA110.2030.5.0 TH35
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm.
Paul Horn LA110.2030.5.0 TI25
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm.
Paul Horn LA110.2030.5.0 TN35
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 20 mm with a maximum groove depth of 30 mm.
Paul Horn LA110.5030.3.0 TI25
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 50 mm with a maximum groove depth of 20 mm.
Paul Horn LA110.5030.5.0 TI25
Insert with a cutting width of 3 mm with corner radius 0.2 mm is suitable for axial grooving of grooves from outer groove diameter 50 mm with a maximum groove depth of 30 mm.
Paul Horn LA210.20.1318.14
Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, m
Paul Horn LA210.20.9513.14
Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matc
Paul Horn LA210.25.1318.14
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, ma
Paul Horn LA210.25.1318.15
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, ma
Paul Horn LA210.25.9513.14
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, match
Paul Horn LA210.25.9513.15
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, match
Paul Horn LA226.20.1318.04
Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, mat
Paul Horn LA226.20.1318.05
Tool holders type
Paul Horn LA226.20.9513.04
Tool holders with shank 20.00 mm Width x 20.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matchi
Paul Horn LA226.20.9513.05
Tool holders type
Paul Horn LA226.25.1318.04
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matc
Paul Horn LA226.25.1318.05
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matc
Paul Horn LA226.25.9513.04
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matchin
Paul Horn LA226.25.9513.05
Tool holders with shank 25.00 mm wide x 25.00 mm height for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matchin
Paul Horn LA315.0815.45.04R TH35
Indexable insert for axial grooving from 8 mm outer groove diameter at a penetration depth of 1.6 mm and a groove width of 1.5 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.0815.45.04R TN35
Indexable insert for axial grooving from 8 mm outer groove diameter at a penetration depth of 1.6 mm and a groove width of 1.5 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.1220.45.05R TH35
Indexable insert for axial grooving from 12 mm outer groove diameter at a penetration depth of 1.8 mm and a groove width of 2 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.1220.45.05R TN35
Indexable insert for axial grooving from 12 mm outer groove diameter at a penetration depth of 1.8 mm and a groove width of 2 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.2015.02R TH35
The indexable insert with a cutting width of 1.5 mm is suitable for grooving up to 2 mm depth.
Paul Horn LA315.2024.45.06R TH35
Indexable insert for axial grooving from 20 mm outer groove diameter at a penetration depth of 2 mm and a groove width of 2.4 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.2024.45.06R TN35
Indexable insert for axial grooving from 20 mm outer groove diameter at a penetration depth of 2 mm and a groove width of 2.4 mm, to a suitable clamp holder for. B. Type 356, Type Links.
Paul Horn LA315.3020.02L TH35
The indexable insert with a cutting width of 2 mm is suitable for grooving up to 3 mm in depth.
Paul Horn LA315.3020.02R TH35
The indexable insert with a cutting width of 2 mm is suitable for grooving up to 3 mm in depth.
Paul Horn LA315.3030.02L TH35
The indexable insert with a cutting width of 3 mm is suitable for grooving up to 3 mm in depth.
Paul Horn LA315.3030.02R TH35
The indexable insert with a cutting width of 3 mm is suitable for grooving up to 3 mm in depth.
Paul Horn LAH25A.12.1520.02
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.12.1520.03
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.12.2025.02
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.12.2025.03
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.12.2530.02
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.12.2530.03
Toolholder with shank 12 mm width x 12 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.16.1520.02
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.16.1520.03
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.16.2025.02
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.16.2025.03
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.16.2530.02
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.16.2530.03
Toolholder with shank 16 mm width x 16 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.20.1520.02
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.20.1520.03
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.20.2025.02
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.20.2025.03
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAH25A.20.2530.02
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable insert t
Paul Horn LAH25A.20.2530.03
Toolholder with shank 20 mm width x 20 mm height for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable insert t
Paul Horn LAK220.1318.04
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1318.05
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1318.06
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1318.14
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1318.15
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1318.16
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.04
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.05
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.06
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.14
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.15
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.1830.16
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.3000.04
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.3000.05
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.3000.06
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6075.05
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6075.06
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6075.15
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6075.16
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6575.04
Cassette for axial grooving from 65.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.6575.14
Cassette for axial grooving from 65.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.04
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.05
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 17.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.06
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 17.00 mm and a maximum groove width of 6.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.14
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.15
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.7595.16
Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 15.00 mm and a maximum groove width of 6.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.04
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.05
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.06
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.14
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.15
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK220.9513.16
Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links.
Paul Horn LAK224.1113.03
Cassette for axial grooving from 110.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1318.03
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1318.04
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1318.05
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1318.06
Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1830.03
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1830.04
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1830.05
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.1830.06
Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3000.03
Cassette for axial grooving from 300 to 1000 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3000.04
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3000.05
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3000.06
Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3847.04
Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.3847.05
Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.4760.04
Cassette for axial grooving of 47.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.4760.05
Cassette for axial grooving of 47.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.5060.03
Cassette for axial grooving from 50.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.6075.03
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.6075.04
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.6075.05
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.6075.06
Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.7590.03
Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.7590.04
Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.7590.05
Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.9011.03
Cassette for axial grooving of 90.00 to 110.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.9013.04
Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.9013.05
Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224.9013.06
Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK224759006
Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links.
Paul Horn LAK25A.1520.02.IK
Cassette for axial grooving of 15 to 20 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2025.02.IK
Cassette for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2025.03.IK
Cassette for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 3 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2025.04.IK
Cassette for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 4 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2530.02.IK
Cassette for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2530.03.IK
Cassette for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.2530.04.IK
Cassette for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 17 mm and a maximum groove width of 4 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.3040.03.IK
Cassette for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 3 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.3040.04.IK
Cassette for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 18 mm and a maximum groove width of 4 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.4050.03.IK
Cassette for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 18 mm and a maximum groove width of 3 mm, matching indexable insert type S25A, execution Links.
Paul Horn LAK25A.4050.04.IK
Cassette for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 20 mm and a maximum groove width of 4 mm, matching indexable insert type S25A, execution Links.
Paul Horn LB105.0016.12.2
Toolholder as boring bar with clamping diameter 16.00mm for receiving inserts Type 105, Type Links.
Paul Horn LB105.0020.12.2
Toolholder as boring bar with clamping diameter 20.00 mm for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C3.20.1.01
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C4.20.1.01
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C4.20.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C5.20.1.01
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C6.20.1.01
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.00C6.20.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 105, Type Links.
Paul Horn LB105.A022.26.31
Toolholder as boring bar with clamping diameter 22.00 mm for STAR SV12 / 20/32
Paul Horn LB105.MD12.6.13
Toolholder as boring bar with clamping diameter 12.00 mm for receiving inserts type 105 for mirror turning, execution Links.
Paul Horn LB105.MD12.8.13
Toolholder as boring bar with clamping diameter 12.00 mm for receiving inserts type 105 for mirror turning, execution Links.
Paul Horn LB106.0012.01
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 14 mm, repairable, fits to cutting type L106.
Paul Horn LB106.0012.02
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 20 mm, repairable, fits to cutting type L106.
Paul Horn LB106.0012.03
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 26 mm, repairable, fits to cutting type L106.
Paul Horn LB107.0012.01
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 18 mm, repairable, fits to cutting type 107th
Paul Horn LB107.0012.02
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 26 mm, repairable, fits to cutting type 107th
Paul Horn LB107.0012.03
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 36 mm, repairable, fits to cutting type 107th
Paul Horn LB109.0016.14.2
Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, repairable, fits to cutting type 109th
Paul Horn LB10P.0012.00
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 12.50 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.00S
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 12.50 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.01
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 21.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.01S
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 21.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.02
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 30.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.02S
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 30.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.03
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 42 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.2.00
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 12.50 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.2.01
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 21.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.2.02
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 30.00 mm, repairable, fits to cutting type 10P.
Paul Horn LB10P.0012.2.03
Toolholder with shaft diameter 12.00 mm and 1 clamping area for aligning the projection length is 42 mm, repairable, fits to cutting type 10P.
Paul Horn LB110.0016.16.2
Toolholder with shank diameters 16.00mm and 1 clamping area for aligning, suitable to cutting type 110th
Paul Horn LB110.0020.16.2
Toolholder with shaft diameter 20.00 mm and 1 clamping area for aligning, suitable to cutting type 110th
Paul Horn LB110.00C3.22.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 110, Type Links.
Paul Horn LB110.00C4.22.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 110, Type Links.
Paul Horn LB110.00C5.22.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 110, Type Links.
Paul Horn LB110.00C6.22.1.02
Toolholder with terminal HORN polygonal shank ISO 26623 for receiving inserts Type 110, Type Links.
Paul Horn LB119.0016.1.32
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable inserts type S119 with the smallest bore diameter 16.00mm.
Paul Horn LB119.0016.1.33
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable inserts type S119 with the smallest bore diameter 16.00mm.
Paul Horn LB11P.0012.00
Toolholder as boring bar shank diameter 12.00 mm and overhang 15:00 mm for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.00S
Toolholder as boring bar shank diameter 12.00 mm and overhang 15:00 mm for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.01
Toolholder as boring bar shank diameter 12.00 mm and 26.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.01S
Toolholder as boring bar shank diameter 12.00 mm and 26.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.02
Toolholder as boring bar shank diameter 12.00 mm and 37.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.03
Toolholder as boring bar shank diameter 12.00 mm and 50.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.2.00
Toolholder as boring bar shank diameter 12.00 mm and overhang 15:00 mm for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.2.01
Toolholder as boring bar shank diameter 12.00 mm and 26.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P.0012.2.02
Toolholder as boring bar shank diameter 12.00 mm and 37.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB11P0012203
Toolholder as boring bar shank diameter 12.00 mm and 50.00 mm overhang for receiving indexable type 11P, with the smallest bore diameter mm 10:50.
Paul Horn LB18P.0012.00
Toolholder as boring bar shank diameter 12.00 mm and 25.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB18P.0012.01
Toolholder as boring bar shank diameter 12.00 mm and 40.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB18P.0016.00
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB18P.0016.01
Toolholder as a drill with shank diameters 16.00mm and 40.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB18P.0016.02
Toolholder as a drill with shank diameters 16.00mm and 56.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB18P.0016.03
Toolholder as a drill with shank diameters 16.00mm and 80.00 mm overhang for receiving indexable type 18P, with the smallest bore diameter mm 18:00.
Paul Horn LB209.0016.1.02.IK
Toolholder as a drill with shank diameters 16.00mm and 30mm projection length for receiving indexable inserts type S209 with the smallest bore diameter 16 mm.
Paul Horn LB209.0016.1.025.IK
Tool holders type
Paul Horn LB209.0016.1.03.IK
Tool holders type
Paul Horn LB209.0020.1.12.IK
Toolholder as a drill with shaft diameter 20 mm and 30 mm overhang for receiving indexable inserts type S209 with the smallest bore diameter 18 mm.
Paul Horn LB209.0020.1.125.IK
Tool holders type
Paul Horn LB209.0020.1.13.IK
Tool holders type
Paul Horn LB216.0020.1.22.IK
Toolholder as a drill with shaft diameter 20 mm and 30 mm overhang for receiving indexable inserts type S216 with the smallest bore diameter 20 mm.
Paul Horn LB216.0020.1.225.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0020.1.23.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0020.1.24.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.2.22.IK
Toolholder as a drill with shaft diameter 25 mm and 50 mm overhang for receiving indexable inserts type S216 with the smallest bore diameter 25 mm.
Paul Horn LB216.0025.2.225.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.2.23.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.2.24.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.23.1.22.IK
Toolholder as a drill with shaft diameter 25 mm and 30 mm overhang for receiving indexable inserts type S216 with the smallest bore diameter 23 mm.
Paul Horn LB216.0025.23.1.225.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.23.1.23.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.23.1.24.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.23.1.25.IK
Toolholder round shank with internal coolant
Paul Horn LB216.0025.23.1.26.IK
Toolholder round shank with internal coolant
Paul Horn LB223.0016.0.42
Toolholder as boring bar shank diameter 16.00mm for receiving indexable inserts type S223 with the smallest bore diameter 22.00 mm.
Paul Horn LB223.0016.0.43
Toolholder as boring bar shank diameter 16.00mm for receiving indexable inserts type S223 with the smallest bore diameter 22.00 mm.
Paul Horn LB223.0016.1.22
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter mm 18:00.
Paul Horn LB223.0016.1.42
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter mm 18:00.
Paul Horn LB223.0016.1.43
Toolholder as a drill with shank diameters 16.00mm and 25.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter mm 18:00.
Paul Horn LB223.0020.0.52
Toolholder as boring bar shank diameter 20.00 mm and overhang 0 mm for receiving indexable inserts type S223 with the smallest bore diameter 27.00 mm.
Paul Horn LB223.0020.0.53
Toolholder as boring bar shank diameter 20.00 mm and overhang 0 mm for receiving indexable inserts type S223 with the smallest bore diameter 27.00 mm.
Paul Horn LB223.0020.1.22
Toolholder as boring bar shank diameter 20.00 mm and 30.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 20.00 mm.
Paul Horn LB223.0020.1.52
Toolholder as boring bar shank diameter 20.00 mm and 30.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 20.00 mm.
Paul Horn LB223.0020.1.53
Toolholder as boring bar shank diameter 20.00 mm and 30.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 20.00 mm.
Paul Horn LB223.0025.0.62
Toolholder as boring bar shank diameter 25.00 mm and overhang 0 mm for receiving indexable inserts type S223 with the smallest bore diameter 33.00 mm.
Paul Horn LB223.0025.0.63
Toolholder as boring bar shank diameter 25.00 mm and overhang 0 mm for receiving indexable inserts type S223 with the smallest bore diameter 33.00 mm.
Paul Horn LB223.0025.1.62
Toolholder as boring bar shank diameter 25.00 mm and 50.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 25.00 mm.
Paul Horn LB223.0025.1.63
Toolholder as boring bar shank diameter 25.00 mm and 50.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 25.00 mm.
Paul Horn LB223.0025.1.K2
Basic holder as boring bar shank diameter 25.00 mm and 30.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LB223.0025.2.K2
Basic holder as boring bar shank diameter 25.00 mm and 60.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LB223.0032.1.K2
Basic holder as boring bar shank diameter 32.00 mm and 30.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LB223.0032.2.K2
Basic holder as boring bar shank diameter 32.00 mm and 60.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LB223.HM16.2.42
Toolholder as boring bar made of solid carbide with shank diameters 16.00mm and 50.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter mm 18:00.
Paul Horn LB223.HM16.2.43
Toolholder as boring bar made of solid carbide with shank diameters 16.00mm and 50.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter mm 18:00.
Paul Horn LB223.HM20.2.52
Toolholder as boring bar made of solid carbide with shaft diameter 20.00 mm and 60.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 20.00 mm.
Paul Horn LB223.HM20.2.53
Toolholder as boring bar made of solid carbide with shaft diameter 20.00 mm and 60.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 20.00 mm.
Paul Horn LB223.HM25.2.62
Toolholder as boring bar made of solid carbide with shaft diameter 25.00 mm and 70.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 25.00 mm.
Paul Horn LB223.HM25.2.63
Toolholder as boring bar made of solid carbide with shaft diameter 25.00 mm and 70.00 mm overhang for receiving indexable inserts type S223 with the smallest bore diameter 25.00 mm.
Paul Horn LB224.0020.0.01
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 30.00 mm.
Paul Horn LB224.0020.0.02
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 30.00 mm.
Paul Horn LB224.0020.0.03
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 30.00 mm.
Paul Horn LB224.0020.0.04
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 30.00 mm.
Paul Horn LB224.0020.0.05
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 30.00 mm.
Paul Horn LB224.0020.1.01
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0020.1.02
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0020.1.03
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0020.1.04
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0020.2.01
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0020.2.02
Toolholder as boring bar shank diameter 20.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.0.01
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 35.00 mm.
Paul Horn LB224.0025.0.02
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 35.00 mm.
Paul Horn LB224.0025.0.03
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 35.00 mm.
Paul Horn LB224.0025.0.04
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 35.00 mm.
Paul Horn LB224.0025.0.05
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 35.00 mm.
Paul Horn LB224.0025.1.01
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.02
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.03
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.04
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.05
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.06
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.1.13
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0025.1.14
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0025.2.01
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.2.02
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.2.03
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0025.2.04
Toolholder as boring bar shank diameter 25.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0032.0.03
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 42.00 mm.
Paul Horn LB224.0032.0.04
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 42.00 mm.
Paul Horn LB224.0032.1.03
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0032.1.04
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0032.1.13
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.1.14
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.1.15
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.1.16
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.1.K2
Basic holder as boring bar shank diameter 32.00 mm for receiving cassette type BK224, with the smallest bore diameter 40.00 mm.
Paul Horn LB224.0032.2.03
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0032.2.04
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 28.00 mm.
Paul Horn LB224.0032.2.13
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.2.14
Toolholder as boring bar shank diameter 32.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 32.00 mm.
Paul Horn LB224.0032.2.K2
Basic holder as boring bar shank diameter 32.00 mm for receiving cassette type BK224, with the smallest bore diameter 40.00 mm.
Paul Horn LB224.0032.K1
Basic holder as boring bar shank diameter 32.00 mm for receiving cassette RIK / LIK224.
Paul Horn LB224.0040.1.25
Toolholder as boring bar shank diameter 40.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 38.00 mm.
Paul Horn LB224.0040.1.26
Toolholder as boring bar shank diameter 40.00 mm for receiving indexable inserts type S224 with the smallest bore diameter 38.00 mm.
Paul Horn LB224.0040.1.K2
Basic holder as boring bar shank diameter 40.00 mm for receiving cassette type BK224, with the smallest bore diameter 40.00 mm.
Paul Horn LB224.0040.2.K2
Basic holder as boring bar shank diameter 40.00 mm for receiving cassette type BK224, with the smallest bore diameter 40.00 mm.
Paul Horn LB224.0040.K1
Basic holder as boring bar shank diameter 40.00 mm for receiving cassette RIK / LIK224.
Paul Horn LB224.00C4.1.K2
Basic holder as boring bar with HORN polygonal shank ISO 26623 for receiving cassette type BK224, at 40.00 mm overhang.
Paul Horn LB224.00C4.2.K2
Basic holder as boring bar with HORN polygonal shank ISO 26623 for receiving cassette type BK224, at 60.00 mm overhang.
Paul Horn LB224.00C5.1.K2
Basic holder as boring bar with HORN polygonal shank ISO 26623 for receiving cassette type BK224, at 50.00 mm overhang.
Paul Horn LB224.00C6.2.K2
Basic holder as boring bar with HORN polygonal shank ISO 26623 for receiving cassette type BK224, at 78.00 mm overhang.
Paul Horn LB224.4520.0.02
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.4520.0.04
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.4520.0.06
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.4525.0.02
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 29 mm.
Paul Horn LB224.4525.0.04
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 29 mm.
Paul Horn LB224.4525.0.06
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter of 29.5 mm.
Paul Horn LB224.4532.0.02
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36 mm.
Paul Horn LB224.4532.0.04
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36 mm.
Paul Horn LB224.4532.0.06
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36.5 mm.
Paul Horn LB224.4540.1.02
Toolholder as a drill with shank diameter 40 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 44 mm.
Paul Horn LB224.4540.1.04
Toolholder as a drill with shank diameter 40 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 44 mm.
Paul Horn LB224.6020.0.02
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.6020.0.04
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.6020.0.06
Toolholder as a drill with shank diameter 20 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 25 mm.
Paul Horn LB224.6025.0.02
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 29 mm.
Paul Horn LB224.6025.0.04
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 29 mm.
Paul Horn LB224.6025.0.06
Toolholder as a drill with shank diameter 25 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter of 29.5 mm.
Paul Horn LB224.6032.0.02
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36 mm.
Paul Horn LB224.6032.0.04
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36 mm.
Paul Horn LB224.6032.0.06
Toolholder as a drill with shank diameter 32 mm for the manufacture of corner undercuts in holes, only for full radius inserts type S224 with the smallest bore diameter 36.5 mm.
Paul Horn LB224.TS50.2.K2
Basic holder as boring bar with HORN shaft TS ISO 26622 for receiving cassette type BK224, with 74 mm overhang.
Paul Horn LB229.0040.1.K2
Basic holder as boring bar shank diameter 40.00 mm for receiving cassette type BK229, with the smallest bore diameter 50.00 mm.
Paul Horn LB229.0040.2.K2
Basic holder as boring bar shank diameter 40.00 mm for receiving cassette type BK229, with the smallest bore diameter 50.00 mm.
Paul Horn LB229.00C3.2.K2
Body type
Paul Horn LB229.00C5.1.K2
Basic holder as boring bar with HORN polygonal shank ISO 26623 for receiving cassette type BK229, at 50.00 mm overhang.
Paul Horn LB229.F040.06.04
Toolholder for wheel machining, matching Wendeschneiplatten type S229, maximum cutting width 4 mm, minimum machining diameter is 200 mm.
Paul Horn LB229.TS40.2.K2
Basic holder as boring bar with HORN shaft TS ISO 26622 for receiving cassette type BK229, at 68.00 mm overhang.
Paul Horn LB229.TS50.1.K2
Basic holder as boring bar with HORN shaft TS ISO 26622 for receiving cassette type BK229, at 54.00 mm overhang.
Paul Horn LB229.TS50.2.K2
Basic holder as boring bar with HORN shaft TS ISO 26622 for receiving cassette type BK229, at 74.00 mm overhang.
Paul Horn LB229.TS63.1.K2
Basic holder as boring bar with HORN shaft TS ISO 26622 for receiving cassette type BK229, at 62.00 mm overhang.
Paul Horn LBK223.0028.01
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LBK223.0028.02
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LBK223.0028.03
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S223 with the smallest bore diameter 28.00 mm.
Paul Horn LBK224.0040.01
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK224.0040.02
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK224.0040.03
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK224.0040.04
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK224.0040.05
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK224.0040.06
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S224 with the smallest bore diameter 40.00 mm.
Paul Horn LBK229.0050.03
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S229, with the smallest bore diameter 50.00 mm.
Paul Horn LBK229.0050.04
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S229, with the smallest bore diameter 50.00 mm.
Paul Horn LBK229.0050.05
Cassette for internal grooving and -längsdrehen for receiving indexable inserts type S229, with the smallest bore diameter 50.00 mm.
Paul Horn LDAH.2525.62
Tool holders with shank 25.00 mm wide x 25.00 mm height for high feed turning, matching indexable insert type DAH62 .., execution Links.
Paul Horn LH100.1010.01
Toolholder with shaft 10:00 mm width x height mm 10:00 for grooving and parting, maximum groove depth 10:50 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1010.11
Toolholder with shaft 10:00 mm width x height mm 10:00 for grooving and parting, maximum groove depth 13:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.01
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.01.IK
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.02
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.02.IK
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.03
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 3.00mm matching insert type S100, execution law.
Paul Horn LH100.1212.03.IK
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1212.11
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.11.IK
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.12
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.12.IK
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1212.24.61
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13:00 mm, groove width 2:00 mm matching insert type S100, left.
Paul Horn LH100.1212.32.63
Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 17.00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.0.23.IK
Toolholder with shank 16 mm width x 16 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.0.24.IK
Toolholder with shank 16 mm width x 16 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.02
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 10:50 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.02.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 10:50 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.03
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 10:50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.03.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 10:50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.1.23.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.11
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.11.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.12
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.12.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.13
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.13.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.14
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 16.00mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.2.23.IK
Toolholder with shank 16 mm width x 16 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.2.24.IK
Toolholder with shank 16 mm width x 16 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.21
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.21.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.22
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:50 mm matching insert type S100, execution law.
Paul Horn LH100.1616.22.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.23
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.23.IK
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1616.24
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.1616.3.22.IK
Toolholder with shank 16 mm width x 16 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 2.5 mm, matching insert type S100, execution Links.
Paul Horn LH100.1616.32.63
Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 17.00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.1908.R.13
Toolholder as Abstechschwert with shank 6 mm width x 19 mm height for grooving and parting, maximum groove depth 10 mm, groove width 3 mm, screw clamp, matching insert type S100, execution Links.
Paul Horn LH100.2020.0.23.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.0.24.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.0.73.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.0.74.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.1.13.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.1.23.IK
Tool holders with shank 20.00 mm wide x 20.00 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 3.00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.1.33.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 33 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.1.34.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 33 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.11
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.11.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.12
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.12.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.13
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.13.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.14
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.2.23.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.2.24.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.2.73.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.2.74.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.21
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.21.IK
Tool holders type
Paul Horn LH100.2020.22
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.22.IK
Tool holders type
Paul Horn LH100.2020.23
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.23.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.3.0.04.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 33 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.3.04
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 33.00 mm, slot width 4 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.3.05
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 33.00 mm, groove width 5 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.3.2.04.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 33 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.3.22.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 2.5 mm, matching insert type S100, execution Links.
Paul Horn LH100.2020.3.33.IK
Toolholder with shank 20 mm width x 20 mm height for grooving and parting, maximum groove depth 33 mm, groove width 3 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.32
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 2:50 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.33
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.33.IK
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.34
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.35
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 5:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2020.73
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 25.00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2020.74
Tool holders with shank 20.00 mm Width x 20.00 mm height for grooving and parting, maximum groove depth 25.00 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.0.23.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.0.24.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.0.73.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.0.74.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.1.33.IK
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 33 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2525.1.34.IK
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 41 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.13
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2525.13.IK
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2525.14
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 16.00mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.2.23.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.2.24.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 21.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.2.73.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.2.74.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth of 25.5 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.21
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 2:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.21.IK
Tool holders type
Paul Horn LH100.2525.22
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.22.IK
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 21:00 mm, groove width 0 mm matching insert type S100, execution law.
Paul Horn LH100.2525.23
Tool holders type
Paul Horn LH100.2525.23.IK
Tool holders type
Paul Horn LH100.2525.3.0.04.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 33 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.3.06
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 33.00 mm, groove width 6:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.3.2.04.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 33 mm, groove width 0 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.3.33.IK
Toolholder with shank 25 mm width x 25 mm height for grooving and parting, maximum groove depth 33 mm, groove width 3 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.33
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2525.33.IK
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 32.50 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2525.34
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 40.50 mm, groove width 4:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.35
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 40.50 mm, groove width 5:00 mm matching insert type S100, execution Links.
Paul Horn LH100.2525.73
Tool holders with shank 25.00 mm wide x 25.00 mm height for grooving and parting, maximum groove depth 25.00 mm, groove width 3.00mm matching insert type S100, execution Links.
Paul Horn LH100.2608.31
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 21:00 mm, groove width 2:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.33
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.33L
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.71
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 2.00 mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.71L
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 2:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.72
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 2:50 mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.93
Toolholder as reinforced Abstechschwert with shank 8:00 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.2608.93L
Toolholder as reinforced Abstechschwert with shank 8:00 mm wide x 26.00 mm height parting, maximum groove depth 25.00 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.15.83
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.15.84
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 4:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.2.44
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 41.00 mm, groove width 4:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.33
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 34 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.33L
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 34 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.34
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 34 mm, groove width 4:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.71
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 25.00 mm, groove width 2:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.72
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 25.00 mm, groove width 2:50 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.72L
Toolholder as reinforced Abstechschwert with shank 7.90 mm wide x 32.00 mm height parting, maximum groove depth 25.00 mm, groove width 2:50 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.83
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.83L
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 3.00mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.84
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 4:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.84L
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 33.50 mm, groove width 4:00 mm, matching insert type S100, execution Links.
Paul Horn LH100.3208.84N
Toolholder as reinforced Abstechschwert with shank 8 mm wide x 32.00 mm height parting, maximum groove depth 41 mm, groove width 4:00 mm, matching insert type S100, execution Links.