|
Paul Horn LH100.3208.93 Toolholder as reinforced Abstechschwert with shank 8:00 mm wide x 32.00 mm height parting, maximum groove depth 32.50 mm, groove width 3.00mm, matching insert type S100, execution Links. |
|
Paul Horn LH100.3208.93L Toolholder as reinforced Abstechschwert with shank 8:00 mm wide x 32.00 mm height parting, maximum groove depth 32.50 mm, groove width 3.00mm, matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.3.06 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 33.00 mm, groove width 6:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.3.08 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 33.00 mm, groove width 8:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.38 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 35.00 mm, groove width 8:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.4.08 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 41 mm, groove width 8:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.4.10 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 41.00 mm, groove width 10:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3225.4.12 Tool holders with shank 25.00 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 41.00 mm, 12.00 mm groove width matching insert type S100, execution Links. |
|
Paul Horn LH100.3280.73L Toolholder with shank 7.90 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 32.5 mm, groove width 3.00mm matching insert type S100, execution Links. |
|
Paul Horn LH100.3280.74L Toolholder with shank 7.90 mm wide x 32.00 mm height for grooving and parting, maximum groove depth 32.5 mm, groove width 4:00 mm matching insert type S100, execution law. |
|
Paul Horn LH100.5517.38.8.08 Toolholder |
|
Paul Horn LH100.5517.44.8.12 Toolholder |
|
Paul Horn LH100.5517.54.8.08 Toolholder with shaft 16:40 mm wide x 65.00 mm height for grooving and parting, maximum groove depth 54.00 mm, groove width 8:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.5517.54.8.10 Toolholder with shaft 16:40 mm wide x 65.00 mm height for grooving and parting, maximum groove depth 54.00 mm, groove width 10:00 mm matching insert type S100, execution Links. |
|
Paul Horn LH100.5517.65.8.12 Toolholder with shaft 16:40 mm wide x 65.00 mm height for grooving and parting, maximum groove depth 65.00 mm, 12.00 mm groove width matching insert type S100, execution Links. |
|
Paul Horn LH101.1010.1.16 Toolholder with shaft 10:00 mm width x height mm 10:00 for grooving and parting, maximum groove depth 13 mm, groove width 2:00 mm matching insert type S101 |
|
Paul Horn LH101.1212.1.16 Tool holders with shank 12.00 mm Width x 12.00 mm height for grooving and parting, maximum groove depth 13 mm, groove width 2:00 mm matching insert type S101 |
|
Paul Horn LH101.1616.1.16 Tool holders with shank 16.00mm width x 16.00mm height for grooving and parting, maximum groove depth 13 mm, groove width 2:00 mm matching insert type S101 |
|
Paul Horn LH105.0808.01 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for receiving inserts Type 105, Type Links. |
|
Paul Horn LH105.1010.01 Toolholder with shaft 10:00 mm width x height mm 10:00 for receiving inserts Type 105, Type Links. |
|
Paul Horn LH105.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for receiving inserts Type 105, Type Links. |
|
Paul Horn LH105.1616.01 Tool holders with shank 16.00 mm wide x 16.00 mm height for receiving inserts Type 105, Type Links. |
|
Paul Horn LH117.MD10.45.5.10 Toolholder with shank 11 mm width x 10 mm height for receiving equipped with monocrystalline diamond inserts type 117 for mirror turning, execution Links. |
|
Paul Horn LH117.MD10.90.5.10 Toolholder with shank 10 mm width x 10 mm height for receiving equipped with monocrystalline diamond inserts type 117 for mirror turning, execution Links. |
|
Paul Horn LH223.1010.01 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 8:00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1010.02 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 8:00 mm, groove width 2:50 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1010.03 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 8:00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2608.01 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH223.2608.03 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 3.00mm matching insert type S223, execution Links. |
|
Paul Horn LH223.3208.01 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 25.00 mm, groove width 2:00 mm matching insert type S223, execution Links. |
|
Paul Horn LH224.1212.20.61 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.20.61IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.20.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.20.62.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.20.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.20.63.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:50 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.21.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.22 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.22.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.23 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.23.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.61 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.61.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.62.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.63.IK Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1212.64 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1608.23 Tool holders with shank 8:00 mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.03.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.04.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.05.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.24.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.0.25.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.01IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.02 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.02.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.7 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.03.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.03.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.04.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.05.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.24.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.2.25.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.21.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.22 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.22.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.23 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.23.IK Tool holders with shank 16.00 mm wide x 16.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18.00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.24 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.3.23.IK Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.61 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.61.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.62 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.62.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.63 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.63.IK Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.64 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.1616.65 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, slot width 10.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.03.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.04.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.05.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.24.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.0.25.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.01 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.01IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.02 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.02.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.7 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.03.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.05 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.06 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.6 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.03.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.04.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.05.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.24.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.2.25.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.21 Tool holders with shank 20.00 mm wide x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18.00 mm, groove width 2.40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.21.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.22 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.22.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.23 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.23.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.24 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.25 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.26 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.6 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.3.23.IK Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.61 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.61.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.62 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.62.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.63 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2020.63.IK Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.03.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.04.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.05.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.24.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.0.25.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.01 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.4 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.01.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.02 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.8 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.02.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.7 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.03.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.04 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.05 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.06 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 14.00 mm, slot width 10.6 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.03.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.04.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.05.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 14 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.24.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.2.25.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.21 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.21.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.22 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.22.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.23 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.23.IK Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.24 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 4:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.25 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, slot width 10.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.26 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18.00 mm, groove width 6.10 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2525.3.23.IK Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 18 mm, groove width 0 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.01 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.02 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.03 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.81 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, 2 mm groove width matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.81L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, 2 mm groove width matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.82 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, groove width 2.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.82L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, groove width 2.5 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.83 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, groove width 3 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.20.T.83L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 11 mm, groove width 3 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.81 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.81L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.82 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.82L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.83 Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.2608.83L Toolholder with shank 7.90 mm wide x 26.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.3208.01 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2:40 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.3208.02 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 2.80 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.3208.03 Toolholder with shank 7.90 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 18:00 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.3208.93 Tool holders with shank 8:00 mm wide x 32.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 32.5 mm, groove width 3.70 mm matching insert type S224, execution Links. |
|
Paul Horn LH224.4520.02 Toolholder with shank 20 mm width x 20 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 2.8 mm matching cutting board only full radius type S224, execution Links. |
|
Paul Horn LH224.4520.04 Toolholder with shank 20 mm width x 20 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 4.4 mm matching cutting board only full radius type S224, execution Links. |
|
Paul Horn LH224.4525.02 Toolholder with shank 25 mm width x 25 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 2.8 mm matching cutting board only full radius type S224, execution Links. |
|
Paul Horn LH224.4525.04 Toolholder with shank 25 mm width x 25 mm height for corner undercutting, maximum groove depth 2.5 mm, groove width 4.4 mm matching cutting board only full radius type S224, execution Links. |
|
Paul Horn LH259.2020.03 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and turning in brass, maximum groove depth 11:00 mm, groove width 3.00mm matching insert Type 259, Type Links. |
|
Paul Horn LH259.2525.03 Tool holders with shank 25.00 mm wide x 25.00 mm height for Einstechen- and turning in brass, maximum groove depth 11:00 mm, groove width 3.00mm matching insert Type 259, Type Links. |
|
Paul Horn LH259.2525.13 Tool holders type |
|
Paul Horn LH264.0808.01 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.0808.51 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 7:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.01 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.02 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.11 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.12 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.61 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1010.62 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.02 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.03 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 5:00 mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.11 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.12 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.13 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.14 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 13:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.22 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.23 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.24 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.62 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.63 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1212.64 Tool holders type |
|
Paul Horn LH264.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.03 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 4:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 5:00 mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.11 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.12 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.13 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.14 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 13:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.22 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.23 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.1616.24 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.KM16.11 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 1:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.KM16.13 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 10:00 mm, groove width 2:50 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.KM16.22 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 2:00 mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH264.KM16.24 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 16.00mm, groove width 3.00mm matching insert type 264 / S264, execution Links. |
|
Paul Horn LH274.0808.04 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.0808.6.04M Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.0808.SF.04 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.0808.SF.S4 Toolholder with shank 8 mm wide x 8 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1010.04 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1010.04.E Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1010.6.04M Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1010.SF.04 Toolholder with shaft 10:00 mm width x height mm 10:00 to Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1010.SF.S4 Toolholder with shank 10 mm width x 10 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1212.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1212.04.E Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1212.6.04M Tool holders with shank 12.00 mm wide x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6.00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1212.SF.04 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1212.SF.S4 Tool holders with shank 12.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1214.07 Tool holders with shank 14.00 mm Width x 12.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 7:00 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1414.04 Tool holders with shank 14.00 mm Width x 14.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1616.04 Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.1616.04.E Tool holders with shank 16.00mm width x 16.00mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.2020.04 Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.2020.04.E Tool holders with shank 20.00 mm Width x 20.00 mm height for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching insert Type 274, Type Links. |
|
Paul Horn LH274.A022.09.04 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert Type 274, Type Links. |
|
Paul Horn LH274.A022.09.07 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, slot width 7 mm fits STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert Type 274, Type Links. |
|
Paul Horn LH274.A022.12.04 Tool holders for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 3 mm matching STAR SV 12.20.32 STAR SR10 / 20/30 and SB 16, matching insert Type 274, Type Links. |
|
Paul Horn LH274.KM16.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 2:00 mm matching insert Type 274, Type Links. |
|
Paul Horn LH316.1616.S3.03 Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution Links. |
|
Paul Horn LH316.2020.S3.03 Tool holders with shank 20.00 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution Links. |
|
Paul Horn LH316.2020.S3.03.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, left. |
|
Paul Horn LH316.2020.S5.05.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, left. |
|
Paul Horn LH316.2525.S3.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3.00mm matching insert type S316, execution Links. |
|
Paul Horn LH316.2525.S3.03.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, left. |
|
Paul Horn LH316.2525.S5.05.IK Toolholder with integrated internal coolant supply for Einstechen- and longitudinal turning, matching insert type S316, left. |
|
Paul Horn LH316.3225.S3.03 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, slot width 3.00 mm matching insert type S316, execution Links. |
|
Paul Horn LHC105.0808.21 Tool holders with shank 8:00 mm wide x 8.00 mm Max height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1010.21 Toolholder with shaft 10:00 mm width x height mm 10:00 for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1010.41 Toolholder with shaft 10:00 mm width x height mm 10:00 for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1212.01 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1212.21 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1212.41 Tool holders with shank 12.00 mm Width x 12.00 mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1616.01 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1616.21 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC105.1616.41 Tool holders with shank 16.00mm width x 16.00mm height for sliding head for receiving inserts Type 105, Type Links. |
|
Paul Horn LHC114.1212.01 Toolholder for external machining with shank 12 mm width x 12 mm height for receiving inserts Type 114, Type Links. |
|
Paul Horn LHC114.1616.01 Toolholder for external machining with shank 16.00mm width x 16.00mm height for receiving inserts Type 114, Type Links. |
|
Paul Horn LHC114.2020.01 Toolholder for external machining with shank 20.00 mm Width x 20.00 mm height for receiving inserts Type 114, Type Links. |
|
Paul Horn LHC114.2525.01 Toolholder for external machining with shank 25.00 mm wide x 25.00 mm height for receiving inserts Type 114, Type Links. |
|
Paul Horn LHC274.KM16.90.04 Tool holders with interface KM16 (KM-Micro) for Einstechen- and longitudinal turning, maximum groove depth 6:00 mm, groove width 2:00 mm matching insert type 274, execution law. |
|
Paul Horn LHC316.1616.03 Tool holders type |
|
Paul Horn LHC316.1616.S3.03 Toolholder with shank 16 mm width x 16 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2020.03 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2020.05 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2020.S3.03 Toolholder with shank 20 mm width x 20 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2525.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2525.05 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.2525.S3.03 Toolholder with shank 25 mm width x 25 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.3225.03 Tool holders type RHC316.3225.03 |
|
Paul Horn LHC316.3225.05 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LHC316.3225.S3.03 Toolholder with shank 25 mm width x 32 mm height for Einstechen- and longitudinal turning, maximum groove depth 8 mm, groove width 3 mm matching insert type S316, execution Links. |
|
Paul Horn LIB25A.20.2025.02.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 12 mm and a maximum groove width of 2 mm, matching indexable in |
|
Paul Horn LIB25A.20.2025.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 14 mm and a maximum groove width of 3 mm, matching indexable in |
|
Paul Horn LIB25A.20.2025.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 20 to 25 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 4 mm, matching indexable in |
|
Paul Horn LIB25A.20.2530.02.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 13 mm and a maximum groove width of 2 mm, matching indexable in |
|
Paul Horn LIB25A.20.2530.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 15 mm and a maximum groove width of 3 mm, matching indexable in |
|
Paul Horn LIB25A.20.2530.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 25 to 30 mm outer groove diameter at a penetration depth of 17 mm and a maximum groove width of 4 mm, matching indexable in |
|
Paul Horn LIB25A.20.3040.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 3 mm, matching indexable in |
|
Paul Horn LIB25A.20.3040.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 30 to 40 mm outer groove diameter at a penetration depth of 16 mm and a maximum groove width of 4 mm, matching indexable in |
|
Paul Horn LIB25A.20.4050.03.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 18 mm and a maximum groove width of 3 mm, matching indexable in |
|
Paul Horn LIB25A.20.4050.04.IK Toolholder as a drill having a shaft diameter of 20 mm for axial grooving of 40 to 50 mm outer groove diameter at a penetration depth of 20 mm and a maximum groove width of 4 mm, matching indexable in |
|
Paul Horn LIK220.1318.04 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1318.05 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1318.06 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1318.14 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1318.16 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.04 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.05 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.06 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.14 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.15 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.1830.16 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.3000.04 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.3000.05 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.3000.06 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.6075.05 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.6075.06 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.6575.04 Cassette for axial grooving from 65.00 to 75.00 mm outer groove diameter at a penetration depth from 10.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.7595.04 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.7595.05 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a penetration depth of 17.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.7595.16 Cassette for axial grooving from 75.00 to 95.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.9513.04 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.9513.05 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.9513.06 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a penetration depth of 25.00 mm and a maximum groove width of 6.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK220.9513.15 Cassette for axial grooving of 95.00 to 130.00 mm outer groove diameter at a cutting depth of up to 15.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 229, Type Links. |
|
Paul Horn LIK224.1113.03 Cassette for axial grooving from 110.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1318.03 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1318.04 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1318.05 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1318.06 Cassette for axial grooving from 130.00 to 180.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1830.03 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1830.04 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1830.05 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.1830.06 Cassette for axial grooving from 180.00 to 300.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.3000.04 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.3000.05 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.3000.06 Cassette for axial grooving from 300.00 to 1000.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.3847.04 Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.3847.05 Cassette for axial grooving of 38.00 to 47.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.4760.04 Cassette for axial grooving of 47.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.5060.03 Cassette for axial grooving from 50.00 to 60.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.6075.03 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.6075.04 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.6075.05 Cassette for axial grooving from 60.00 to 75.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.7590.03 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.7590.04 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.7590.05 Cassette for axial grooving from 75.00 to 90.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.9011.03 Cassette for axial grooving of 90.00 to 110.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 3.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.9013.04 Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 4.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.9013.05 Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 5.00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LIK224.9013.06 Cassette for axial grooving of 90.00 to 130.00 mm outer groove diameter at a penetration depth of 14.00 mm and a maximum groove width of 6:00 mm, matching indexable insert Type 224, Type Links. |
|
Paul Horn LK360.00.01 Cassette type, width: 12.00 mm, max. |
|
Paul Horn LK360.00.02 Cassette type, width: 12.00 mm, max. |
|
Paul Horn LK360.00.03 Cassette type, width: 12.00 mm, max. |
|
Paul Horn LK360.00.04 Cassette type, width: 16.00 mm, max. |
|
Paul Horn LM274.0080.S27.7.13 Cutterhead type |
|
Paul Horn LM274.0119.S40.7.19 Cutterhead type |
|
Paul Horn LM275.D040.10.04 Schlagmesser for producing polygons on lathes with a cutting diameter of 40 mm suitable for Type 275 at maximum penetration depth of 3 mm, machine specific for DECO 7/10, execution law. |
|
Paul Horn LNK100.0840.1.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 2.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.1.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.1.03 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.1.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 4.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.1.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a maximum groove width of 5.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.3.02 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum slot width 2.50 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0840.3.03 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0842.16.4.72.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2.5 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.16.4.73.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 3 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.16.5.71.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.17.5.71.IK Cassette for grooving and parting at a penetration depth of 17 mm and a maximum groove width of 2 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.23.3.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.23.4.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.23.4.73.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 3 mm, matching indexable insert type S100, left |
|
Paul Horn LNK100.0842.24.4.72.IK Cassette for grooving and parting at a penetration depth of 23 mm and a maximum groove width of 2.5 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.26.4.73.IK Cassette for grooving and parting at a penetration depth of 27 mm and a maximum groove width of 3 mm, matching indexable insert type S100, left |
|
Paul Horn LNK100.0842.27.4.73.IK Cassette for grooving and parting at a penetration depth of 27 mm and a maximum groove width of 3 mm, matching insert type S100, left |
|
Paul Horn LNK100.0842.34.4.73.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 3 mm, matching indexable insert type S100, left |
|
Paul Horn LNK100.0842.34.4.74.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 4 mm, matching indexable insert type S100, left |
|
Paul Horn LNK100.0845.22.4.72.IK Cassette for grooving and parting at a penetration depth of 22 mm and a maximum groove width of 2.5 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.26.4.73.IK Cassette for grooving and parting at a penetration depth of 26 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.34.4.73.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.34.4.74.IK Cassette for grooving and parting at a penetration depth of 34 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.42.4.73.IK Cassette for grooving and parting at a penetration depth of 42 mm and a maximum groove width of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.42.4.74.IK Cassette for grooving and parting at a penetration depth of 42 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.46.4.74.IK Cassette for grooving and parting at a penetration depth of 46 mm and a maximum groove width of 4 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.0845.55.4.74.IK cassette |
|
Paul Horn LNK100.3215.23 Cassette for grooving and parting at a penetration depth of 25.00 mm and a maximum groove width of 3.00 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.956.1051.30 Cassette for grooving and parting at a penetration depth of 51 mm and a clamping range of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.956.1262.40 Cassette for grooving and parting at a penetration depth of 62 mm and a clamping range of 4 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.956.4221.30 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.956.5226.30 Cassette for grooving and parting at a penetration depth of 26 mm and a clamping range of 3 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK100.956.8241.40 Cassette for grooving and parting at a penetration depth of 41 mm and a clamping range of 4 mm, matching indexable insert type S100, execution Links. |
|
Paul Horn LNK220.3215.03 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.03.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.04 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.04.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.05 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.05.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.06 Cassette for grooving and parting at a penetration depth of 25.00 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3215.06.IK Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.13 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.13.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 3.0 to 3.8 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.14 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.14.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 3.8 to 4.4 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.15 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.15.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 4.4 to 5.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.16 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK220.3218.16.IK Cassette for grooving and parting at a penetration depth of 15 mm and a clamping range from 5.1 to 6.09 mm, matching indexable insert type 229 / S229, execution Links. |
|
Paul Horn LNK224.0840.1.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.0 to 2.4 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.0840.1.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.4 to 2.8 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.0840.1.03 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.8 to 3.7 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.0840.1.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 3.7 to 4.4 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.0840.1.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 4.4 to 5.1 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.0840.1.06 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 5.1 to 6.0 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.01 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.0 to 2.4 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.02 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.4 to 2.8 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.03 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 2.8 to 3.7 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.03.IK Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range from 2.8 to 3.7 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.04 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 3.7 to 4.4 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.04.IK Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range from 3.7 to 4.4 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.05 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 4.4 to 5.1 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.05.IK Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range from 4.4 to 5.1 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.06 Cassette for grooving and parting at a penetration depth from 18.00 mm and a clamping range from 5.1 to 6.0 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.3215.06.IK Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range from 5.1 to 6.0 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.956.3216.20 Cassette for grooving and parting at a penetration depth of 16 mm and a clamping range of 2 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.956.3216.25 Cassette for grooving and parting at a penetration depth of 16 mm and a clamping range of 2.5 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.956.4221.20 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 2 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.956.4221.25 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 2.5 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK224.956.4221.30 Cassette for grooving and parting at a penetration depth of 21 mm and a clamping range of 3 mm, matching indexable insert type S224, execution Links. |
|
Paul Horn LNK229.956.5225.30 Cassette for grooving and parting at a penetration depth of 25 mm and a clamping range of 3 mm, matching indexable insert type S229, execution Links. |
|
Paul Horn LNK229.956.6518.60 Cassette for grooving and parting at a penetration depth of 18 mm and a clamping range of 6 mm, matching indexable insert type S229, execution Links. |
|
Paul Horn LNK264.0840.1.01 Cassette for grooving and parting at a penetration depth from 13.00 mm and a clamping range of 1.5 mm, matching indexable insert type 264 / S264, execution Links. |
|
Paul Horn LNK264.0840.1.02 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 2 mm, matching indexable insert type 264 / S264, execution Links. |
|
Paul Horn LNK264.0840.1.03 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 2.5 mm, matching indexable insert type 264 / S264, execution Links. |
|
Paul Horn LNK264.0840.1.04 Cassette for grooving and parting at a penetration depth of 16.00mm and a clamping range of 3 mm, matching indexable insert type 264 / S264, execution Links. |
|
Paul Horn LNK274.0840.1.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 0.5 to 4 mm, matching indexable insert Type 274, Type Links. |
|
Paul Horn LNK356.0220.03.IK Cassette type |
|
Paul Horn LNK356.0220.05 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.1 to 5.4 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0220.05.IK Cassette for grooving and parting at a penetration depth of 5 mm and a clamping range of 0 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0220.15 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.1 to 5.4 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0220.23.IK Cassette type |
|
Paul Horn LNK356.0220.25.IK Cassette type |
|
Paul Horn LNK356.0840.1.05 Cassette for grooving and parting at a penetration depth of 5 mm and a clamping range from 3.25 to 5.45 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0840.1.07 Cassette for grooving and parting at a penetration depth of 5 mm and a clamping range from 6.60 to 7.50 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0840.1.16 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 5.45 to 6.60 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.0840.1.17 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 6.60 to 7.50 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK356.1220.16 Cassette for grooving and parting at a penetration depth of 5.00 mm and a clamping range from 1.1 to 6.6 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0220.01 Cassette for grooving and parting at a penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0220.02 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0220.03 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0220.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0840.1.01 Cassette for grooving and parting at a penetration depth of 4.00 mm and a clamping range from 0.5 to 1.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0840.1.02 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 1.9 to 2.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0840.1.03 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 2.9 to 3.9 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK360.0840.1.04 Cassette for grooving and parting at a penetration depth of 6:00 mm and a clamping range from 3.9 to 6.3 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK368.0760.08 Cassette for grooving and parting at a penetration depth of 9 mm and a clamping range of 0 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK368.0760.11 Cassette for grooving and parting at a penetration depth of 9 mm and a clamping range of 0 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK368.0840.1.08 Cassette for grooving and parting at a penetration depth from 8.00 mm and a clamping range from 0.5 to 1.2 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK368.0840.1.11 Cassette for grooving and parting at a penetration depth from 8.00 mm and a clamping range of 1.2 - 1,5 mm, matching indexable insert type 312 / S312, execution Links. |
|
Paul Horn LNK760.0224.01 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a maximum groove width of 2.40 mm, matching indexable insert type S224, equipment specific for TORNOS DECO20 / 26, versio |
|
Paul Horn LNK760.0224.02 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a maximum groove width of 2.80 mm, matching indexable insert type S224, equipment specific for TORNOS DECO20 / 26, versio |
|
Paul Horn LNK760.0224.03 Cassette for grooving and parting at a penetration depth of up to 15.00 mm and a maximum groove width of 3.70 mm, matching indexable insert type S224, equipment specific for TORNOS DECO20 / 26, versio |
|
Paul Horn LS100.0480.EN8 AS66 The insert with a cutting width of 8 mm is suitable for tapping. |
|
Paul Horn LS100.0520.E2 TF43 The insert with a cutting width of 2 mm is suitable for tapping. |
|
Paul Horn LS100.0520.E2 TF45 The insert with a cutting width of 2 mm is suitable for tapping. |
|
Paul Horn LS100.0520.E2 TI22 The insert LS100.0520.E2 Ti22 with a cutting width of 2 mm is suitable for tapping. |
|
Paul Horn LS100.0520.F2 TF45 Insert for butzenarmen parting with a cutting width of 2 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0520.F2 TF46 Insert for butzenarmen parting with a cutting width of 2 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0525.E2 TF46 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0525.F2 TF45 Insert for butzenarmen parting with a cutting width of 2.5 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0530.E2 TC92 The insert with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.E2 TF43 The insert with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.E2 TF45 The insert with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.E2 TF46 The insert with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.E2 TI22 The insert LS100.0530.E2 Ti22 with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.F2 TC93 The insert with a cutting width of 3 mm is suitable for tapping. |
|
Paul Horn LS100.0530.F2 TF43 Insert for butzenarmen parting with a cutting width of 3 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0530.F2 TF45 Insert for butzenarmen parting with a cutting width of 3 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0530.F2 TF46 Insert for butzenarmen parting with a cutting width of 3 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0530.F2 TI22 Insert LS100.0530.F2 Ti22 to butzenarmen parting with a cutting width of 3 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.E2 TF43 Insert for butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.E2 TF45 Insert for butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.E2 TI22 Insert LS100.0540.E2 Ti22 to butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry E and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.EN2 ALX3 The insert LS100.0540.EN2 AlX3 with a cutting width of 4 mm is suitable for tapping. |
|
Paul Horn LS100.0540.F2 TC93 Insert to butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.F2 TF43 Insert for butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.0540.F2 TF45 Insert for butzenarmen parting with a cutting width of 4 mm and a corner radius of 0.2 mm, with geometry F and Abstechschräge 5 °, Model Links. |
|
Paul Horn LS100.1520.FY0 AS45 Insert for butzenarmen parting with a cutting width of 2 mm with geometry and FY Abstechschräge 15 °, Model Links. |
|
Paul Horn LS100.1530.FY0 AS45 Insert for butzenarmen parting with a cutting width of 3 mm with geometry and FY Abstechschräge 15 °, Model Links. |
|
Paul Horn LS108.0100.D1 TH35 Insert deep for the cutting of grooves from bore diameter 8 mm with 1 mm width, corner radius 0.1 mm and a maximum of 1 mm. |
|
Paul Horn LS108.0150.D1 TH35 Insert deep for the cutting of grooves from bore diameter 8 mm with 1.5 mm width, corner radius 0.1 mm and a maximum of 1 mm. |
|
Paul Horn LS108.0200.D2 TH35 Insert deep for the cutting of grooves from bore diameter 8 mm with 2 mm width, corner radius 0.2 mm and a maximum of 1 mm. |
|
Paul Horn LS108.1846.R2 TH35 Insert for internal turning and copying from bore diameter 7.8 mm, with a corner radius of 0.2 mm. |
|
Paul Horn LS108.1846.R4 TH35 Insert for internal turning and copying from bore diameter 7.8 mm, with a corner radius of 0.4 mm. |
|
Paul Horn LS10P.0100.1.D1 TH35 Insert for the cutting of grooves from bore diameter 9 mm 1 mm width, corner radius 0.1 mm and a maximum depth of 2 mm. |
|
Paul Horn LS10P.0150.1.D1 TH35 Insert for the cutting of grooves from bore diameter 9 mm 1.5 mm width, corner radius 0.1 mm and a maximum depth of 2 mm. |
|
Paul Horn LS10P.0150.2.D1 TH35 Insert deep for the cutting of grooves from bore diameter 10 mm 1.5 mm width, corner radius 0.1 mm and a maximum of 3 mm. |
|
Paul Horn LS10P.0200.1.D2 TH35 Insert for the cutting of grooves from bore diameter 9 mm 2 mm width, corner radius 0.2 mm and a maximum depth of 2 mm. |
|
Paul Horn LS10P.0200.2.D2 TH35 Insert for the cutting of grooves from bore diameter 10 mm 2 mm width, corner radius 0.2 mm and a maximum depth of 3 mm. |
|
Paul Horn LS10P.1854.R2 TH35 Insert for the cutting of grooves from bore diameter 8.8 mm 0 mm width, corner radius 0.2 mm and a maximum of 0 mm deep. |
|
Paul Horn LS10P.1854.R4 TH35 Insert for the cutting of grooves from bore diameter 8.8 mm 0 mm width, corner radius 0.4 mm and a maximum of 0 mm deep. |
|
Paul Horn LS111.0150.D1 TH35 Insert for the cutting of grooves to from bore diameter 11 mm with 1.5 mm width (nose radius 0.1 mm) and a maximum of 2.3 mm deep. |
|
Paul Horn LS111.0200.D2 TH35 Insert deep for the cutting of grooves to from bore diameter 11 mm with 2 mm width (nose radius 0.2 mm) and a maximum of 2.3 mm. |
|
Paul Horn LS111.0250.D2 TH35 Insert for the cutting of grooves to from bore diameter 11 mm with width 2.5 mm (corner radius 0.2 mm) and a maximum of 2.3 mm deep. |
|
Paul Horn LS111.1867.R2 TH35 Insert for internal turning and copying from bore diameter 11 mm with a corner radius of 0.2 mm. |
|
Paul Horn LS111.1867.R4 TH35 Insert for internal turning and copying from bore diameter 11 mm with a corner radius of 0.4 mm. |
