Paul Horn HDC.HSKA050.10.075 System Recording as hydraulic expansion chuck with HSK A 50, clamping diameter 10 mm. |
Paul Horn HDC.HSKA050.12.085 System Recording as hydraulic expansion chuck with HSK A 50, clamping diameter 12 mm. |
Paul Horn HDC.HSKA050.16.090 System Recording as hydraulic expansion chuck with HSK A 50, clamping diameter 16 mm. |
Paul Horn HDC.HSKA050.20.090 System Recording as hydraulic expansion chuck with HSK A 50, clamping diameter 20 mm. |
Paul Horn HDC.HSKA063.06.070 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 6 mm. |
Paul Horn HDC.HSKA063.08.070 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 8 mm. |
Paul Horn HDC.HSKA063.10.080 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 10 mm. |
Paul Horn HDC.HSKA063.12.085 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 12 mm. |
Paul Horn HDC.HSKA063.16.090 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 16 mm. |
Paul Horn HDC.HSKA063.20.090 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 20 mm. |
Paul Horn HDC.HSKA100.06.075 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 6 mm. |
Paul Horn HDC.HSKA100.08.075 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 8 mm. |
Paul Horn HDC.HSKA100.10.090 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 10 mm. |
Paul Horn HDC.HSKA100.12.095 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 12 mm. |
Paul Horn HDC.HSKA100.16.100 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 16 mm. |
Paul Horn HDC.HSKA100.20.105 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 20 mm. |
Paul Horn HDC.SK40.06.080 System Recording as hydraulic expansion chuck SK40, clamping diameter 6 mm. |
Paul Horn HDC.SK40.08.080 System Recording as hydraulic expansion chuck SK40, clamping diameter 8 mm. |
Paul Horn HDC.SK40.10.080 System Recording as hydraulic expansion chuck SK40, clamping diameter 10 mm. |
Paul Horn HDC.SK40.12.080 System Recording as hydraulic expansion chuck SK40, clamping diameter 12 mm. |
Paul Horn HDC.SK40.16.080 System Recording as hydraulic expansion chuck SK40, clamping diameter 16 mm. |
Paul Horn HDC.SK50.20.080 System Recording as hydraulic expansion chuck with SK50, clamping diameter 20 mm. |
Paul Horn HDE.HSKA063.12.080 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 12 mm. |
Paul Horn HDE.HSKA063.16.080 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 16 mm. |
Paul Horn HDE.HSKA063.20.080 System Recording as hydraulic expansion chuck with HSK A 63, clamping diameter 20 mm. |
Paul Horn HDE.HSKA100.20.090 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 20 mm. |
Paul Horn HDE.HSKA100.32.100 System Recording as hydraulic expansion chuck with HSK A 100, clamping diameter 32 mm. |
Paul Horn HDE.SK40.12.050 System Recording as hydraulic expansion chuck SK40, clamping diameter 12 mm. |
Paul Horn HDE.SK40.16.064 System Recording as hydraulic expansion chuck SK40, clamping diameter 16 mm. |
Paul Horn HDE.SK40.20.064 System Recording as hydraulic expansion chuck SK40, clamping diameter 20 mm. |
Paul Horn HDE.SK50.12.050 System Recording as hydraulic expansion chuck with SK50, clamping diameter 12 mm. |
Paul Horn HDE.SK50.20.064 System Recording as hydraulic expansion chuck with SK50, clamping diameter 20 mm. |
Paul Horn HDE.SK50.32.081 System Recording as hydraulic expansion chuck with SK50, clamping diameter 32 mm. |
Paul Horn HDZB.1203.KD Intermediate sleeve to reduce by 12 mm shaft diameter 3 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, coolant sealing |
Paul Horn HDZB.1203.PK Intermediate sleeve to reduce by 12 mm shaft diameter 3 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.1204.KD Intermediate sleeve to reduce by 12 mm Shaft diameter 4 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, coolant sealing |
Paul Horn HDZB.1204.PK Intermediate sleeve to reduce by 12 mm Shaft diameter 4 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.1205.KD Intermediate sleeve to reduce by 12 mm shaft diameter 5 mm, to fit all DRHD system recordings with 12 mm clamping diameter, coolant sealing |
Paul Horn HDZB.1205.PK Intermediate sleeve to reduce by 12 mm shaft diameter 5 mm, to fit all DRHD system recordings with 12 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.1206.KD Intermediate sleeve to reduce by 12 mm Shaft diameter 6 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, coolant sealing |
Paul Horn HDZB.1206.PK Intermediate sleeve to reduce by 12 mm Shaft diameter 6 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.1208.KD Intermediate sleeve to reduce by 12 mm shaft diameter 8 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, coolant sealing |
Paul Horn HDZB.1208.PK Intermediate sleeve to reduce by 12 mm shaft diameter 8 mm, suitable for all DRHD system recordings with 12 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2003.KD Intermediate sleeve to reduce by 20 mm shaft diameter 3 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2003.PK Intermediate sleeve to reduce by 20 mm shaft diameter 3 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2004.KD Intermediate sleeve to reduce by 20 mm Shaft diameter 4 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2004.PK Intermediate sleeve to reduce by 20 mm Shaft diameter 4 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2005.KD Intermediate sleeve to reduce by 20 mm shaft diameter 5 mm, to fit all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2005.PK Intermediate sleeve to reduce by 20 mm shaft diameter 5 mm, to fit all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2006.KD Intermediate sleeve to reduce by 20 mm Shaft diameter 6 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2006.PK Intermediate sleeve to reduce by 20 mm Shaft diameter 6 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2007.KD Intermediate sleeve to reduce by 20 mm shaft diameter 7 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2007.PK Intermediate sleeve to reduce by 20 mm shaft diameter 7 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2008.KD Intermediate sleeve to reduce by 20 mm shaft diameter 8 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2008.PK Intermediate sleeve to reduce by 20 mm shaft diameter 8 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2009.KD Intermediate sleeve to reduce by 20 mm shank diameter 9 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2009.PK Intermediate sleeve to reduce by 20 mm shank diameter 9 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2010.KD Intermediate sleeve to reduce by 20 mm shaft diameter 10 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2010.PK Intermediate sleeve to reduce by 20 mm shaft diameter 10 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2011.KD Intermediate sleeve to reduce by 20 mm shaft diameter 11 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2011.PK Intermediate sleeve to reduce by 20 mm shaft diameter 11 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2012.KD Intermediate sleeve to reduce by 20 mm Shaft diameter 12 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2012.PK Intermediate sleeve to reduce by 20 mm Shaft diameter 12 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2013.KD Intermediate sleeve to reduce by 20 mm shaft diameter 13 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2013.PK Intermediate sleeve to reduce by 20 mm shaft diameter 13 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2014.KD Intermediate sleeve to reduce by 20 mm shaft diameter 14 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2014.PK Intermediate sleeve to reduce by 20 mm shaft diameter 14 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2015.KD Intermediate sleeve to reduce by 20 mm shaft diameter 15 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2015.PK Intermediate sleeve to reduce by 20 mm shaft diameter 15 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2016.KD Intermediate sleeve to reduce by 20 mm shaft diameter 16 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2016.PK Intermediate sleeve to reduce by 20 mm shaft diameter 16 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.2017.KD Intermediate sleeve to reduce by 20 mm shaft diameter 17 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, coolant sealing |
Paul Horn HDZB.2017.PK Intermediate sleeve to reduce by 20 mm shaft diameter 17 mm, suitable for all DRHD system recordings with 20 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3206.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 6 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3206.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 6 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3208.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 8 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3208.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 8 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3210.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 10 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3210.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 10 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3212.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 12 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3212.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 12 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3214.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 14 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3214.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 14 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3216.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 16 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3216.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 16 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3218.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 18 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3218.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 18 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3220.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 20 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3220.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 20 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZB.3225.KD Intermediate sleeve to reduce 32 mm according to shaft diameter 25 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, coolant sealing |
Paul Horn HDZB.3225.PK Intermediate sleeve to reduce 32 mm according to shaft diameter 25 mm, suitable for all DRHD system recordings with 32 mm clamping diameter, not the coolant seal. |
Paul Horn HDZBZ Bush puller, for safe dismantling of intermediate sleeves type HDZB, cut or uncut |
Paul Horn HSKA 11 63 01 Basic recording URMA for direct recording of Einbauhalter BKT105.U90K.01 and BKT356.U90K.05, with terminal HSKA-63rd |
Paul Horn HSKA 11 63 03 Basic recording URMA for direct recording of Einbauhalter BKT105.U90K.01 and BKT356.U90K.05, with terminal HSKA-63rd |
Paul Horn HSK-L220.0063.K2 Basic holder HSK L220.0063.K2 for cassette type 220 |
Paul Horn HSK-R220.0063.K2 Basic holder HSK R220.0063.K2 for cassette type 220 |
Paul Horn HSKT100.L220.150.K1 Basic holder for cassette type 220 |
Paul Horn HSKT100.L220.150.K2 Basic holder for cassette type 220 |
Paul Horn HSKT100.R220.150.K1 Basic holder for cassette type 220 |
Paul Horn HSKT100.R220.150.K2 Basic holder for cassette type 220 |
Paul Horn HSKT40.L842.01.K1 Basic holder 12164th for cassette type R / LNK100.842 ... with HORN HSKT-63 DIN version Left |
Paul Horn HSKT40.R842.01.K1 Basic holder 12164th for cassette type R / LNK100.842 ... with HORN HSKT-63 DIN execution law |
Paul Horn HSKT40L840110K1 Basic holder type HSKT40.L840.110.K1 |
Paul Horn HSKT63.L220.110.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.110.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.110.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.110.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.120.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.120.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.130.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.130.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.130.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.130.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.150.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.150.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.150.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.150.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.175.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.175.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.175.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.L220.175.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.L845.01.K1 Basic holder for cassette type R / LNK100.845 ... with HORN HSKT-63 according to DIN 12164th version Left. |
Paul Horn HSKT63.LB224.095.K2 Basic holder for cassette type BK224 |
Paul Horn HSKT63.LB224.115.K2 Basic holder for cassette type BK224 |
Paul Horn HSKT63.LB229.095.K2 Basic holder for cassette type BK229 |
Paul Horn HSKT63.LB229.115.K2 Basic holder for cassette type BK229 |
Paul Horn HSKT63.R220.110.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.110.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.110.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.110.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.120.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.120.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.130.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.130.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.130.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.130.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.150.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.150.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.150.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.150.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.175.K1 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.175.K2 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.175.K3 Basic holder for cassette type 220 |
Paul Horn HSKT63.R220.175.K4 Basic holder for cassette type 220 |
Paul Horn HSKT63.R845.01.K1 Basic holder 12164th for cassette type R / LNK100.845 ... with HORN HSKT-63 DIN execution law |
Paul Horn HSKT63.RB224.095.K2 Basic holder for cassette type BK224 |
Paul Horn HSKT63.RB224.115.K2 Basic holder for cassette type BK224 |
Paul Horn HSKT63.RB229.095.K2 Basic holder for cassette type BK229 |
Paul Horn HSKT63.RB229.115.K2 Basic holder for cassette type BK229 |
Paul Horn HSKW-L849.0050.01 Basic holder for SchГјtte multi-spindle series SCX |
Paul Horn HSKW-N849.0040.01 Basic holder for SchГјtte multi-spindle series SCX |
Paul Horn HSKW-R849.0050.01 Basic holder for SchГјtte multi-spindle series SCX |
Paul Horn IR105.10.100 Basic holder Graf fit CITIZEN, clamping diameter 25.40 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.10.60 Basic holder Graf fit CITIZEN, clamping diameter 25.40 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.1060.IKV Einbauhalter Graf clamping diameter 25.40 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.16.30 Basic holder Graf suitable for STAR, clamping diameter 16.00mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.16.50 Basic holder Graf suitable for STAR, clamping diameter 16.00mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.16.70 Basic holder Graf suitable for STAR, clamping diameter 16.00mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.1640.IKV Einbauhalter Graf clamping diameter 16.00mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.18.310 Basic holder Graf fits TORNOS, clamping diameter 18:00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.20.170 Basic holder Graf fits TORNOS, clamping diameter 20.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.20.185 Basic holder Graf fits TORNOS, clamping diameter 20.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.20.30 Basic holder Graf fit CITIZEN, clamping diameter 20.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.20.50 Basic holder Graf fit CITIZEN, clamping diameter 20.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.2040.IKV Einbauhalter Graf clamping diameter 20.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.22.100 Basic holder Graf suitable for STAR, clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.22.120 Basic holder Graf suitable for STAR, clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.22.38 Basic holder Graf suitable for STAR, clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.22.50 Basic holder Graf suitable for STAR, clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.22.70 Basic holder Graf suitable for STAR, clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.2240.IKV Einbauhalter Graf clamping diameter 22.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.25.100 Basic holder Graf fits TORNOS, clamping diameter 25.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.25.150 Basic holder Graf fits TORNOS, clamping diameter 25.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.2560.IKV Einbauhalter Graf clamping diameter 25.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.28.80 Basic holder Graf fits TORNOS, clamping diameter 28.00 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.34.100 Basic holder Graf fit CITIZEN, clamping diameter 19.5 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.34.40 Basic holder Graf fit CITIZEN, clamping diameter 19.5 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.34.50 Basic holder Graf fit CITIZEN, clamping diameter 19.5 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.34.70 Basic holder Graf fit CITIZEN, clamping diameter 19.5 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn IR105.3440.IKV Einbauhalter Graf clamping diameter 1.19 mm with internal coolant supply, suitable to insert type 105 |
Paul Horn K00 02 01 Washer |
Paul Horn K00 02 20 Washer |
Paul Horn KM16 NCM SF19 28 Flange with interface KM16 Micro for direct mounting on the turret. |
Paul Horn KM16-NSPKG Clamping screw Type, tightening torque: 10.0 Nm, suitable for all KM16 basic holder |
Paul Horn KM2016NCMSF2434 Flange with interface KM16 Micro for direct mounting on the turret. |
Paul Horn KQ2L06-M5 SMC Winkelverschraubung M5 can be securely screwed by an internal coolant supply |
Paul Horn L105.0005.1.4 TH35 Insert for the cutting of grooves from bore diameter of 4 mm to 10 mm length, full radius 0.5 mm maximum 0.8 mm deep. |
Paul Horn L105.0005.2.4 TN35 Insert for the cutting of grooves from bore diameter of 4 mm to 15 mm length, full radius 0.5 mm maximum 0.8 mm deep. |
Paul Horn L105.0005.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length, full radius 0.5 mm maximum 1.8 mm deep. |
Paul Horn L105.0005.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 0.5 mm max 1 mm deep. |
Paul Horn L105.0005.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length, full radius 0.5 mm maximum 2.5 mm deep. |
Paul Horn L105.0005.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length, full radius 0.5 mm maximum 1.8 mm deep. |
Paul Horn L105.0005.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length, full radius 0.5 mm maximum 2.5 mm deep. |
Paul Horn L105.0007.1.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 10 mm length, full radius 0.75 mm maximum 1 mm deep. |
Paul Horn L105.0007.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length, full radius 0.75 mm maximum 1.8 mm deep. |
Paul Horn L105.0007.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 0.75 mm maximum 1 mm deep. |
Paul Horn L105.0007.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length, full radius 0.75 mm maximum 2.5 mm deep. |
Paul Horn L105.0007.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length, full radius 0.75 mm maximum 1.8 mm deep. |
Paul Horn L105.0007.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length, full radius 0.75 mm maximum 2.5 mm deep. |
Paul Horn L105.0010.1.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 10 mm length, full radius 1.0 mm max 1 mm deep. |
Paul Horn L105.0010.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length, full radius 1.0 mm maximum 1.8 mm deep. |
Paul Horn L105.0010.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 1 mm maximum 1 mm deep. |
Paul Horn L105.0010.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length, full radius 1.0 mm maximum 2.5 mm deep. |
Paul Horn L105.0010.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length, full radius 1 mm maximum 1.8 mm deep. |
Paul Horn L105.0010.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length, full radius 1 mm maximum 2.5 mm deep. |
Paul Horn L105.0045.0.1 TF45 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn L105.0045.0.1 TN35 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn L105.0045.1.1 TF45 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn L105.0050.0.2 TI25 Insert deep for the cutting of grooves from bore diameter 2 mm to 6 mm length with 0.5 mm width, corner radius 0.2 mm and a maximum of 0.4 mm. |
Paul Horn L105.0050.1.2 TI25 Insert deep for the cutting of grooves from bore diameter 2 mm to 9 mm length with 0.5 mm width, corner radius of 0 mm and a maximum of 0.4 mm. |
Paul Horn L105.0050.2.2 TI25 Insert for the cutting of grooves from bore diameter 2 mm to 12 mm length with 0.5 mm width, corner radius 0.2 mm and a maximum of 0.4 mm deep. |
Paul Horn L105.0060.0.1 TF45 Insert for starting bevels with 60 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn L105.0060.1.1 TF45 Insert for starting bevels with 60 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn L105.0070.1.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 8 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn L105.0070.2.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 12 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn L105.0070.3.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 16 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn L105.0100.1.4 MG12 Insert for cutting of grooves from bore diameter of 4 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm deep. |
Paul Horn L105.0100.1.4 TN35 Insert deep for the cutting of grooves from bore diameter of 4 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn L105.0100.1.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0100.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0100.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0100.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0100.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn L105.0100.2.4 MG12 Insert for cutting of grooves from bore diameter of 4 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm deep. |
Paul Horn L105.0100.2.4 TN35 Insert for the cutting of grooves from bore diameter of 4 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm deep. |
Paul Horn L105.0100.2.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.2.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.3.4 MG12 Insert deep for the cutting of grooves from bore diameter of 4 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn L105.0100.3.4 TN35 Insert deep for the cutting of grooves from bore diameter of 4 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn L105.0100.3.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.3.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.3.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0100.3.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.3.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0100.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.4.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0100.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0100.5.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.5.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0100.5.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0100.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0102.2.3 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm with a maximum of 0.3 mm pitch. |
Paul Horn L105.0150.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.1.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0150.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0150.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.1.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn L105.0150.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn L105.0150.2.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.2.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.2.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.3.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0150.3.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.3.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.3.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0150.3.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.3.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0150.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0150.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.4.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0150.5.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.5.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0150.5.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0150.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.1.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0200.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0200.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0200.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.1.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0200.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0200.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.1.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn L105.0200.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn L105.0200.2.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.2.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.2.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.3.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.3.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.3.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn L105.0200.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn L105.0200.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0200.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0200.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn L105.0200.5.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0200.5.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn L105.0200.5.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn L105.0203.1.3 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm to 10 mm in length with a maximum of 0.35mm pitch. |
Paul Horn L105.0203.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.35mm pitch. |
Paul Horn L105.0205.2.3 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.2.4 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.2.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.2.5 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0205.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 20 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn L105.0407.1.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 10 mm in length with a maximum of .75 mm pitch. |
Paul Horn L105.0407.2.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of .75 mm pitch. |
Paul Horn L105.0407.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn L105.0407.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn L105.0407.3.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 20 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn L105.0407.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 20 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn L105.0407.4.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 25 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn L105.0510.1.8 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 10 mm in length with a maximum of 0 mm pitch. |
Paul Horn L105.0510.1.8 TI25 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 10 mm in length with a maximum of 0 mm pitch. |
Paul Horn L105.0510.2.5 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.2.6 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.2.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.2.8 MG12 Insert uncoated |
Paul Horn L105.0510.2.8 TI25 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 15 mm in length with a maximum of 0 mm pitch. |
Paul Horn L105.0510.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 20 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.4.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 25 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0510.4.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 25 mm in length with a maximum of 1 mm pitch. |
Paul Horn L105.0515.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0515.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0515.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0520.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0520.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0520.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0520.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0533.2.6.B CB10 Insert CBN tipped for hard internal turning from bore diameter of 6 mm to 20 mm length and a corner radius of 0.2 mm. |
Paul Horn L105.0610.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn L105.0610.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn L105.0610.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn L105.0610.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn L105.0612.2.6 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn L105.0612.2.6 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn L105.0612.2.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn L105.0612.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 1.25mm pitch. |
Paul Horn L105.0612.4.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 25 mm in length with a maximum of 1.25mm pitch. |
Paul Horn L105.0615.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0615.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0615.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn L105.0620.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0620.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0620.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0620.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn L105.0810.1.3 TN35 Insert to preparting and chamfering from bore diameter 3 mm to 10 mm in length with a 0.7 mm width, maximum 0.5 mm deep. |
Paul Horn L105.0810.1.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 10 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.1.8 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 10 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn L105.0810.1.9 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 10 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn L105.0810.2.3 TN35 Insert to preparting and chamfering from bore diameter 3 mm to 15 mm in length with a 0.7 mm width, maximum 0.5 mm deep. |
Paul Horn L105.0810.2.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.2.5 MG12 Insert for preparting and chamfering from bore diameter 5 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.2.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.2.8 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 15 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn L105.0810.3.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.3.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.3.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.4.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 25 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.4.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 25 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.5.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 30 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.5.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 30 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn L105.0810.5.6 TN35 Insert to preparting and chamfering from bore diameter 6 mm to 30 mm in length with 1 mm width, more than 1 mm deep. |
Paul Horn L105.0810.7.6 TN35 Insert to preparting and chamfering from bore diameter 6 mm to 40 mm in length with 1 mm width, more than 1 mm deep. |
Paul Horn L105.0815.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn L105.0815.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn L105.0815.2.7 TH35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn L105.0815.2.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn L105.0815.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn L105.0815.3.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn L105.0815.4.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn L105.0820.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn L105.0820.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn L105.0820.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn L105.0825.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn L105.0825.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn L105.0825.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn L105.0830.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn L105.0830.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn L105.0830.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn L105.1019.005.1.4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1019.005.2.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1019.005.3.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1019.005.4.4 TH35 Insert for internal turning from bore diameter of 4 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1019.1.4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1019.2.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1019.3.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1019.4.4 TH35 Insert for internal turning from bore diameter of 4 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.005.1.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.005.2.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.005.3.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.005.4.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.005.5.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.005.6.5 TH35 Insert for internal turning from bore diameter of 5 mm to 35 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1023.1.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.2.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.3.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.4.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.5.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1023.6.5 TH35 Insert for internal turning from bore diameter of 5 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.005.1.6 TH35 Insert for internal turning from bore diameter of 6 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.005.2.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.005.3.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.005.4.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.005.5.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.005.6.6 TH35 Insert for internal turning from bore diameter of 6 mm to 35 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1033.1.6 TH35 Insert for internal turning from bore diameter of 6 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.2.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.3.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.4.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.5.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1033.6.6 TH35 Insert for internal turning from bore diameter of 6 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.1.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.2.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.3.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.4.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.5.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1040.6.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn L105.1620.2.5 TH35 Insert to Strehlen of UN thread (part profile) from bore diameter 5 mm to 15 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn L105.1620.2.6 TN35 Insert to Strehlen of UN thread (part profile) from bore diameter 6 mm to 15 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn L105.1620.3.5 TH35 Insert to Strehlen of UN thread (part profile) from bore diameter 5 mm to 20 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn L105.1802.0.02 MG12 Insert for internal turning from bore diameter of 0.2 mm to 1 mm in length, with a corner radius of 0.02mm. |
Paul Horn L105.1802.0.03 MG12 Insert for internal turning from bore diameter of 0.3 mm to 1 mm in length, with a corner radius of 0.02mm. |
Paul Horn L105.1802.0.05 MG12 Insert for internal turning from bore diameter of 0.5 mm to 2 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1803.0.07 MG12 Insert for internal turning from bore diameter of 0.7 mm to 2 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1805.0.1 MG12 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.0.1 TI25 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.0.1 TN35 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.005.0.1 TF45 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1805.005.1.1 TF45 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1805.005.2.1 TF45 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1805.1.1 TI25 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.1.1 TN35 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.2.1 TI25 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1805.2.1 TN35 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.0.2 MG12 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.0.2 TH35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.0.2 TI25 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.0.2 TN35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.005.0.2 TF45 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1809.005.1.2 TF45 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1809.005.2.2 TF45 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1809.01.0.2 TH35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.01.0.2 TI25 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.01.1.2 TH35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.01.1.2 TI25 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.01.2.2 TH35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.01.2.2 TI25 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn L105.1809.1.2 MG12 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.1.2 TH35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15 mm. |
Paul Horn L105.1809.1.2 TI25 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.1.2 TN35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.2.2 MG12 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.2.2 TH35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.2.2 TI25 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1809.2.2 TN35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn L105.1813.005.0.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.0.25 TH35 Insert for internal turning from bore diameter of 2.5 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.1.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.1.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.1.3 TF45 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.2.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.2.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.2.3 TF45 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn L105.1813.005.3.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 16 mm in length, with a corner radius of 0.05mm. |