Paul Horn R105.0007.1.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 10 mm length, full radius 0.75 mm maximum 1 mm deep. |
Paul Horn R105.0007.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length, full radius 0.75 mm maximum 1.8 mm deep. |
Paul Horn R105.0007.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 0.75 mm maximum 1 mm deep. |
Paul Horn R105.0007.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length, full radius 0.75 mm maximum 1.8 mm deep. |
Paul Horn R105.0007.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length, full radius 0.75 mm maximum 2.5 mm deep. |
Paul Horn R105.0010.1.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 10 mm length, full radius 1.0 mm max 1 mm deep. |
Paul Horn R105.0010.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length, full radius 1.0 mm maximum 1.8 mm deep. |
Paul Horn R105.0010.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 1 mm maximum 1 mm deep. |
Paul Horn R105.0010.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length, full radius 1.0 mm maximum 2.5 mm deep. |
Paul Horn R105.0010.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length, full radius 1 mm maximum 1.8 mm deep. |
Paul Horn R105.0010.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length, full radius 1 mm maximum 2.5 mm deep. |
Paul Horn R105.0025.2.3 AN25 Insert for the cutting of grooves from bore diameter 3 mm to 15 mm length, full radius 0.25mm maximum 0.6 mm deep. |
Paul Horn R105.0025.3.5 AN25 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm length, full radius 0.25 mm maximum 0.6 mm deep. |
Paul Horn R105.0045.0.1 TF45 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn R105.0045.0.1 TN35 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn R105.0045.1.1 TF45 Insert for starting bevels with 45 В° from bore diameter 1 mm corner radius 0.2 mm. |
Paul Horn R105.0050.0.2 TI25 Insert deep for the cutting of grooves from bore diameter 2 mm to 6 mm length with 0.5 mm width, corner radius 0.2 mm and a maximum of 0.4 mm. |
Paul Horn R105.0050.1.2 TI25 Insert deep for the cutting of grooves from bore diameter 2 mm to 9 mm length with 0.5 mm width, corner radius of 0 mm and a maximum of 0.4 mm. |
Paul Horn R105.0050.1.3 AN25 Insert deep for the cutting of grooves from bore diameter 3 mm to 8 mm length with 0.5 mm width and a maximum of 0.5 mm. |
Paul Horn R105.0050.1.4 AN25 Insert deep for the cutting of grooves from bore diameter of 4 mm to 10 mm length with 0.5 mm width and a maximum of 0.6 mm. |
Paul Horn R105.0050.2.2 TI25 Insert for the cutting of grooves from bore diameter 2 mm to 12 mm length with 0.5 mm width, corner radius 0.2 mm and a maximum of 0.4 mm deep. |
Paul Horn R105.0050.2.3 AN25 Insert deep for the cutting of grooves from bore diameter 3 mm to 12 mm length with 0.5 mm width and a maximum of 0.5 mm. |
Paul Horn R105.0050.2.3 MG12 Insert deep for the cutting of grooves from bore diameter 3 mm to 12 mm length with 0.5 mm width and a maximum of 0.5 mm. |
Paul Horn R105.0050.2.4 AN25 Insert for the cutting of grooves from bore diameter of 4 mm to 15 mm length with 0.5 mm width and a maximum of 0.6 mm deep. |
Paul Horn R105.0050.3.3 AN25 Insert deep for the cutting of grooves from bore diameter 3 mm to 16 mm length with 0.5 mm width and a maximum of 0.5 mm. |
Paul Horn R105.0050.3.4 AN25 Insert deep for the cutting of grooves from bore diameter of 4 mm to 20 mm length with 0.5 mm width and a maximum of 0.6 mm. |
Paul Horn R105.0060.0.1 TF45 Insert deep for the cutting of grooves from bore diameter of 1 mm to 12 mm in length with 0 mm width, corner radius 0.2 mm and a maximum of 0 mm. |
Paul Horn R105.0060.1.1 TF45 Insert deep for the cutting of grooves from bore diameter of 1 mm to 12 mm in length with 0 mm width, corner radius 0.2 mm and a maximum of 0 mm. |
Paul Horn R105.0070.1.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 8 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn R105.0070.2.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 12 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn R105.0070.3.3 TI25 Insert deep for the cutting of grooves from bore diameter 3 mm to 16 mm in length with a 0.7 mm width, corner radius 0.2 mm and a maximum of 0.6 mm. |
Paul Horn R105.0100.1.4 MG12 Insert deep for the cutting of grooves from bore diameter of 4 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn R105.0100.1.4 TN35 Insert deep for the cutting of grooves from bore diameter of 4 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn R105.0100.1.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0100.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0100.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0100.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.1.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0100.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0100.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.1.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0100.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0100.2.4 MG12 Insert for cutting of grooves from bore diameter of 4 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm deep. |
Paul Horn R105.0100.2.4 TN35 Insert for the cutting of grooves from bore diameter of 4 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm deep. |
Paul Horn R105.0100.2.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.2.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.2.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.3.4 MG12 Insert deep for the cutting of grooves from bore diameter of 4 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn R105.0100.3.4 TN35 Insert deep for the cutting of grooves from bore diameter of 4 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 0.8 mm. |
Paul Horn R105.0100.3.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.3.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.3.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.3.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0100.3.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0100.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.3.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0100.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0100.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.4.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0100.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0100.5.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.5.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0100.5.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0100.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 1 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0102.2.3 TN35 Insert for the cutting of grooves from bore diameter 3 mm to 15 mm in length with 0 mm width, corner radius of 0 mm and a maximum of 0 mm deep. |
Paul Horn R105.0150.1.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.1.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0150.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0150.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.1.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0150.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0150.2.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.2.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.2.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.3.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.3.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.3.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.3.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.3.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0150.3.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0150.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.3.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 20 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0150.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0150.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0150.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.4.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0150.5.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.5.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0150.5.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0150.5.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 30 mm length with 1.5 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.1.5 MG12 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0200.1.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0200.1.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0200.1.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.1.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0200.1.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0200.1.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.1.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0200.1.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 10 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0200.2.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.2.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.2.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.2.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.2.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.2.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.2.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.2.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.2.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 15 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.3.5 MG12 Insert for cutting of grooves from bore diameter 5 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.3.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.3.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.3.6 MG12 Insert for cutting of grooves from bore diameter 6 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.3.6 TH35 Insert deep for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0200.3.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.3.7 MG12 Insert for cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.3.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.3.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 20 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0200.4.5 TH35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.4.5 TN35 Insert for the cutting of grooves from bore diameter 5 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum depth of 1 mm. |
Paul Horn R105.0200.4.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.4.6 TN35 Insert for the cutting of grooves from bore diameter 6 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.4.7 TH35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.4.7 TN35 Insert for the cutting of grooves from bore diameter 6.8 mm to 25 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm deep. |
Paul Horn R105.0200.5.5 TH35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0200.5.5 TN35 Insert deep for the cutting of grooves from bore diameter 5 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1 mm. |
Paul Horn R105.0200.5.6 TH35 Insert for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm deep. |
Paul Horn R105.0200.5.6 TN35 Insert deep for the cutting of grooves from bore diameter 6 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 1.8 mm. |
Paul Horn R105.0200.5.7 TH35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0200.5.7 TN35 Insert deep for the cutting of grooves from bore diameter 6.8 mm to 30 mm in length with 2 mm width, corner radius of 0 mm and a maximum of 2.5 mm. |
Paul Horn R105.0203.1.3 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm to 10 mm in length with a maximum of 0.35mm pitch. |
Paul Horn R105.0203.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.35mm pitch. |
Paul Horn R105.0205.2.4 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.2.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.2.5 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.23 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm to 15 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.3.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 20 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 20 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0205.4.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 25 mm in length with a maximum of 0.5 mm pitch. |
Paul Horn R105.0407.1.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 10 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.2.3 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 3 mm to 15 mm in length with a maximum of .75 mm pitch. |
Paul Horn R105.0407.2.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 15 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 15 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.3.4 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter of 4 mm to 20 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 20 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0407.4.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 5 mm to 25 mm in length with a maximum of 0.75 mm pitch. |
Paul Horn R105.0505.1.8 AN25 Insert with a cutting width of 0.5 mm without corner radius, suitable for axial grooving of grooves from outer groove diameter 5 mm with a maximum groove depth of 2 mm. |
Paul Horn R105.0510.1.8 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 10 mm in length with a maximum of 0 mm pitch. |
Paul Horn R105.0510.1.8 TI25 Insert to Grooving from a minimum of 5 mm Einstechdurchmesser with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn R105.0510.2.5 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.2.5 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.2.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.2.6 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.2.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.2.8 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 15 mm in length with a maximum of 0 mm pitch. |
Paul Horn R105.0510.2.8 TI25 Insert for chasing of metric ISO thread (part profile) from bore diameter 0 mm to 15 mm in length with a maximum of 0 mm pitch. |
Paul Horn R105.0510.3.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 20 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.4.5 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 4.8 mm to 25 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0510.4.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 25 mm in length with a maximum of 1 mm pitch. |
Paul Horn R105.0513.0.3.B CB10 Insert CBN tipped for hard internal turning from bore diameter of 3 mm to 7 mm in length and a corner radius of 0.15mm. |
Paul Horn R105.0515.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0515.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0515.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05 mm. |
Paul Horn R105.0515.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0519.1.4.B CB10 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0.2 mm. |
Paul Horn R105.0520.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0520.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0520.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0520.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 5 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0523.2.5.B CB10 Insert CBN tipped for hard internal turning from bore diameter of 5 mm to 15 mm length and a corner radius of 0.2 mm. |
Paul Horn R105.0533.2.6.B CB10 Insert CBN tipped for hard internal turning from bore diameter of 6 mm to 15 mm length and a corner radius of 0.2 mm. |
Paul Horn R105.0540.2.7.B CB10 Insert CBN tipped for hard internal turning from bore diameter of 6.8 mm to 15 mm length and a corner radius of 0.2 mm. |
Paul Horn R105.0610.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn R105.0610.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn R105.0610.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05 mm. |
Paul Horn R105.0610.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1 mm width, maximum penetration depth of 2 mm and a corner radius of 0.05mm. |
Paul Horn R105.0612.2.6 MG12 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn R105.0612.2.6 TH35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn R105.0612.2.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 15 mm in length with a maximum of 1.25mm pitch. |
Paul Horn R105.0612.3.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 20 mm in length with a maximum of 1.25mm pitch. |
Paul Horn R105.0612.4.6 TN35 Insert for chasing of metric ISO thread (part profile) from bore diameter 6 mm to 25 mm in length with a maximum of 1.25mm pitch. |
Paul Horn R105.0615.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05 mm. |
Paul Horn R105.0615.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0615.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0615.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.05mm. |
Paul Horn R105.0620.1.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0620.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0620.2.8 MG12 Insert for grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0620.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 6 mm with 2 mm width, maximum penetration depth of 5 mm and a corner radius of 0.05mm. |
Paul Horn R105.0810.1.3 TN35 Insert to preparting and chamfering from bore diameter 3 mm to 15 mm in length with a 0.7 mm width, maximum 0.5 mm deep. |
Paul Horn R105.0810.1.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 10 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.1.8 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 10 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn R105.0810.1.9 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 10 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn R105.0810.2.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.2.5 MG12 Insert for preparting and chamfering from bore diameter 5 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.2.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 15 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.2.8 TI25 Insert to preparting and chamfering from bore diameter 0 mm to 15 mm in length with 0 mm width, maximum 0 mm deep. |
Paul Horn R105.0810.3.4 TN35 Insert to preparting and chamfering from bore diameter of 4 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.3.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.3.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 20 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.4.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 25 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.4.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 25 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.5.5 TI25 Insert to preparting and chamfering from bore diameter 5 mm to 30 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.5.5 TN35 Insert to preparting and chamfering from bore diameter 5 mm to 30 mm in length with 1 mm width, maximum 0.7 mm deep. |
Paul Horn R105.0810.5.6 TN35 Insert to preparting and chamfering from bore diameter 6 mm to 30 mm in length with 1 mm width, more than 1 mm deep. |
Paul Horn R105.0810.7.6 TN35 Insert to preparting and chamfering from bore diameter 6 mm to 40 mm in length with 1 mm width, more than 1 mm deep. |
Paul Horn R105.0815.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn R105.0815.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn R105.0815.2.7 TH35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn R105.0815.2.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn R105.0815.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 1.5 mm width, maximum penetration depth of 3 mm and a corner radius of 0.15mm. |
Paul Horn R105.0815.3.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn R105.0815.4.7 TN35 Insert for grooving from minimum Einstechdurchmesser from 0 mm to 0 mm width, maximum penetration depth of 0 mm and a corner radius of 0 mm. |
Paul Horn R105.0820.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn R105.0820.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn R105.0820.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2 mm width, maximum penetration depth of 4 mm and a corner radius of 0.15mm. |
Paul Horn R105.0825.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn R105.0825.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn R105.0825.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 2.5 mm width, maximum penetration depth of 5 mm and a corner radius of 0.15mm. |
Paul Horn R105.0830.1.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn R105.0830.1.9 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn R105.0830.2.8 TI25 Insert to Grooving from minimum Einstechdurchmesser of 8 mm with 3 mm width, maximum penetration depth of 6 mm and a corner radius of 0.15mm. |
Paul Horn R105.1019.005.1.4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1019.005.2.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1019.005.3.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1019.005.4.4 TH35 Insert for internal turning from bore diameter of 4 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1019.1.4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1019.2.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1019.3.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1019.4.4 TH35 Insert for internal turning from bore diameter of 4 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.005.1.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.005.2.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.005.3.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.005.4.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.005.5.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.005.6.5 TH35 Insert for internal turning from bore diameter of 5 mm to 35 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1023.1.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.2.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.3.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.4.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.5.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1023.6.5 TH35 Insert for internal turning from bore diameter of 5 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.005.1.6 TH35 Insert for internal turning from bore diameter of 6 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.005.2.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.005.3.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.005.4.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.005.5.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.005.6.6 TH35 Insert for internal turning from bore diameter of 6 mm to 35 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1033.1.6 TH35 Insert for internal turning from bore diameter of 6 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.2.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.3.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.4.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.5.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1033.6.6 TH35 Insert for internal turning from bore diameter of 6 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.1.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.2.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.3.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.4.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.5.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1040.6.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 35 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1620.2.5 TH35 Insert to Strehlen of UN thread (part profile) from bore diameter 5 mm to 15 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn R105.1620.2.6 TN35 Insert to Strehlen of UN thread (part profile) from bore diameter 6 mm to 15 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn R105.1620.3.5 TH35 Insert to Strehlen of UN thread (part profile) from bore diameter 5 mm to 20 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn R105.1620.3.6 TN35 Insert to Strehlen of UN thread (part profile) from bore diameter 6 mm to 20 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn R105.1620.4.6 TN35 Insert to Strehlen of UN thread (part profile) from bore diameter 6 mm to 25 mm in length, with a pitch range 16-20 transition / inch. |
Paul Horn R105.1802.0.02 MG12 Insert for internal turning from bore diameter of 0.2 mm to 1 mm in length, with a corner radius of 0.02mm. |
Paul Horn R105.1802.0.03 MG12 Insert for internal turning from bore diameter of 0.3 mm to 1 mm in length, with a corner radius of 0.02mm. |
Paul Horn R105.1802.0.05 MG12 Insert for internal turning from bore diameter of 0.5 mm to 2 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1803.0.07 MG12 Insert for internal turning from bore diameter of 0.7 mm to 2 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1805.0.1 MG12 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.0.1 TI25 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.0.1 TN35 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.005.0.1 TF45 Insert for internal turning from bore diameter of 1 mm to 4 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1805.005.1.1 TF45 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1805.005.2.1 TF45 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1805.1.1 TI25 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.1.1 TN35 Insert for internal turning from bore diameter of 1 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.2.1 TI25 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1805.2.1 TN35 Insert for internal turning from bore diameter of 1 mm to 8 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.0.2 MG12 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.0.2 TH35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.0.2 TI25 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.0.2 TN35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.005.0.2 TF45 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1809.005.1.2 TF45 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1809.005.2.2 TF45 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1809.01.0.2 TH35 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.01.0.2 TI25 Insert for internal turning from bore diameter of 2 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.01.1.2 TH35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.01.1.2 TI25 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.01.2.2 TH35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.01.2.2 TI25 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1809.1.2 MG12 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.1.2 TH35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.1.2 TI25 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.1.2 TN35 Insert for internal turning from bore diameter of 2 mm to 9 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.2.2 MG12 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.2.2 TH35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.2.2 TI25 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1809.2.2 TN35 Insert for internal turning from bore diameter of 2 mm to 12 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1813.005.0.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.0.25 TH35 Insert for internal turning from bore diameter of 2.5 mm to 6 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.1.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.1.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 9 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.1.3 TF45 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.2.15 TF45 Insert for internal turning from bore diameter of 1.5 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.2.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.2.25 TH35 Insert for internal turning from bore diameter of 2.5 mm to 12 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.2.3 TF45 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.3.25 TF45 Insert for internal turning from bore diameter of 2.5 mm to 16 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.005.3.3 TF45 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1813.01.0.15 TH35 Insert for internal turning from bore diameter of 1.5 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.0.15 TI25 Insert for internal turning from bore diameter of 1.5 mm to 6 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.1.15 TH35 Insert for internal turning from bore diameter of 1.5 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.1.15 TI25 Insert for internal turning from bore diameter of 1.5 mm to 9 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.1.3 TH35 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.1.3 TI25 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.2.15 TH35 Insert for internal turning from bore diameter of 1.5 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.2.15 TI25 Insert for internal turning from bore diameter of 1.5 mm to 12 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.2.3 TH35 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.2.3 TI25 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.3.3 TH35 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.01.3.3 TI25 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1813.1.3 MG12 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.1.3 TH35 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.1.3 TI25 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.1.3 TN35 Insert for internal turning from bore diameter of 3 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.2.3 MG12 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.2.3 TH35 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.2.3 TI25 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.2.3 TN35 Insert for internal turning from bore diameter of 3 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.3.3 MG12 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.3.3 TH35 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.3.3 TI25 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1813.3.3 TN35 Insert for internal turning from bore diameter of 3 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.005.1.4 TF45 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1819.005.2.4 TF45 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1819.005.3.4 TF45 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1819.01.1.4F HS36 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1819.01.2.4F HS36 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1819.04.1.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1819.04.2.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1819.04.3.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1819.1.4 MG12 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.4 TI25 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.4 TN35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.H.4 TF45 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.H4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.1.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.4 MG12 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.4 TI25 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.4 TN35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.H.4 TF45 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.H.4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.2.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.4 MG12 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.4 TI25 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.4 TN35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.H.4 TF45 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.H.4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1819.3.HV4 TH35 Insert for internal turning from bore diameter of 4 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.005.1.5 TF45 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1823.005.2.5 TF45 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1823.005.3.5 TF45 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1823.005.4.5 TF45 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1823.005.5.5 TF45 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1823.04.1.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1823.04.2.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1823.04.3.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1823.04.4.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1823.04.5.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1823.1.5 MG12 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.5 TI25 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.5 TN35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.H.5 TF45 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.H.5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.1.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 10 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.15.2.5F HS36 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1823.15.3.5F HS36 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.15mm. |
Paul Horn R105.1823.2.5 MG12 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.5 TI25 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.5 TN35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.H.5 TF45 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.H.5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.2.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.5 MG12 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.5 TI25 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.5 TN35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.H.5 TF45 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.H.5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.3.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.5 MG12 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.5 TI25 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.5 TN35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.5.2 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1823.4.5.2 TI25 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1823.4.H.5 TF45 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.H.5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.4.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.5 MG12 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.5 TI25 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.5 TN35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.5.2 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1823.5.5.2 TI25 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1823.5.H.5 TF45 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.H.5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1823.5.HV5 TH35 Insert for internal turning from bore diameter of 5 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.005.2.6 TF45 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1833.005.3.6 TF45 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1833.005.4.6 TF45 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1833.005.5.6 TF45 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1833.04.2.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1833.04.3.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1833.04.4.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1833.04.5.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1833.2.6 MG12 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.6 TI25 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.6 TN35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.H.6 TF45 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.H.6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.2.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.6 MG12 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.6 TI25 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.6 TN35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.H.6 TF45 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.H.6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.3.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.6 MG12 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.6 TI25 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.6 TN35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.6.2 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1833.4.6.2 TI25 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1833.4.H.6 TF45 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.H.6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.4.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 25 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.6 MG12 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.6 TI25 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.6 TN35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.6.2 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1833.5.6.2 TI25 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.1 mm. |
Paul Horn R105.1833.5.H.6 TF45 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.H.6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1833.5.HV6 TH35 Insert for internal turning from bore diameter of 6 mm to 30 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.005.3.7 TF45 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1840.005.4.7 TF45 Insert for internal turning from bore diameter of 6.8 mm to 25 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1840.005.5.7 TF45 Insert for internal turning from bore diameter of 6.8 mm to 30 mm in length, with a corner radius of 0.05mm. |
Paul Horn R105.1840.04.2.HV7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 15 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1840.04.3.HV7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1840.04.4.HV7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 25 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1840.04.5.HV7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 30 mm in length, with a corner radius of 0.4 mm. |
Paul Horn R105.1840.2.HV7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 15 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.7 MG12 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.7 TI25 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.7 TN35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.H.7 TF45 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |
Paul Horn R105.1840.3.H.7 TH35 Insert for internal turning from bore diameter of 6.8 mm to 20 mm in length, with a corner radius of 0.2 mm. |