Paul Horn S100.0200.F2 TC93 Insert multi-layer coated |
Paul Horn S100.0200.F2 TF43 Insert for grooving and parting with a cutting width of 2 mm and 0.2 mm corner radius, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0200.F2 TF45 Insert for grooving and parting with a cutting width of 2 mm and 0.2 mm corner radius, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0200.F2 TF46 The insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S100.0200.F2 TI22 The insert S100.0200.F2 Ti22 with a cutting width of 2 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0200.FY2 HP65 The insert with a cutting width of 2 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0200.FY2 TI25 The insert with a cutting width of 2 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0200.WA2 DD26 The coated cutting insert with a cutting width of 2 mm is suitable for parting and grooving of aluminum. |
Paul Horn S100.0200.WA2 K10 The uncoated cutting plate with a cutting width of 2 mm is suitable for parting and grooving of aluminum. |
Paul Horn S100.0220.EN2 ALX3 The insert S100.0220.EN2 AlX3 with a cutting width of 2.2 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0220.EN2 AS6G Insert for grooving and parting with a cutting width of 2.2 mm and 0.2 mm corner radius, with geometry EN, matching clamp holder z. B. H100. |
Paul Horn S100.0220.FY2 TI25 The insert with a cutting width of 2.2 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.3V2 HP65 The insert with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.E2 TC93 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0250.E2 TF43 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0250.E2 TF45 The insert with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.E2 TF46 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0250.E2 TI22 Insert S100.0250.E2 Ti22 for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0250.EN2 ALX3 The insert S100.0250.EN2 AlX3 with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.EN2 AS6G The insert with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.EN2.IK AS45 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry EN, matching clamp holder. B. H100. |
Paul Horn S100.0250.EN2.IK HP65 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry EN, matching clamp holder. B. H100. |
Paul Horn S100.0250.F2 TC92 The insert with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0250.F2 TF43 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry F, matching clamp holder. B. H100. |
Paul Horn S100.0250.F2 TF45 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry F, matching clamp holder. B. H100. |
Paul Horn S100.0250.F2 TF46 Insert for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry F, matching clamp holder. B. H100. |
Paul Horn S100.0250.F2 TI22 Insert S100.0250.F2 Ti22 for grooving and parting with a cutting width of 2.5 mm and 0.2 mm corner radius, for with geometry F, matching clamp holder. B. H100. |
Paul Horn S100.0250.FY2 TI25 The insert with a cutting width of 2.5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.3V2 AS45 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.3V2.IK HP65 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with V, matching clamp holder. B. H100. |
Paul Horn S100.0300.E2 ALX2 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 ALX3 The insert S100.0300.E2 AlX3 with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TC92 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TC93 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TF42 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TF43 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TF45 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TF46 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.E2 TI22 The insert S100.0300.E2 Ti22 with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.EN2 ALX3 The insert S100.0300.EN2 AlX3 with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.EN2 AS63 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.EN2 AS66 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with EN, matching clamp holder. B. H100. |
Paul Horn S100.0300.EN2 AS6G The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.EN2.IK AS45 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with EN, matching clamp holder. B. H100. |
Paul Horn S100.0300.EN2.IK HP65 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with EN, matching clamp holder. B. H100. |
Paul Horn S100.0300.F2 TC92 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.F2 TC93 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0300.F2 TF42 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0300.F2 TF43 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.F2 TF45 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.F2 TF46 Insert for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0300.F2 TI22 Insert S100.0300.F2 Ti22 for grooving and parting with a cutting width of 3 mm and corner radius 0.2 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0300.FY2 HP65 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.FY2 TI25 The insert with a cutting width of 3 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0300.N2 HP65 The insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S100.0300.WA2 DD26 The coated cutting insert with a cutting width of 3 mm is suitable for parting and grooving of aluminum. |
Paul Horn S100.0300.WA2 K10 The uncoated cutting plate with a cutting width of 3 mm is suitable for parting and grooving of aluminum. |
Paul Horn S100.0400.3V3 AS45 The insert with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.E3 ALX3 The insert S100.0400.E3 AlX3 with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.E3 TC92 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.E3 TC93 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.E3 TF43 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.E3 TF45 The insert with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.E3 TF46 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.E3 TI22 Insert S100.0400.E3 Ti22 for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.EN3 ALX3 The insert S100.0400.EN3 AlX3 with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.EN3 AS63 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry EN, matching clamp holder z. B. H100. |
Paul Horn S100.0400.EN3 AS6G Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry EN, matching clamp holder z. B. H100. |
Paul Horn S100.0400.EN3.IK AS45 The insert with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.EN3.IK HP65 The insert with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.F3 TC93 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.F3 TF43 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.F3 TF45 Insert for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.F3 TF46 The insert with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.F3 TI22 Insert S100.0400.F3 Ti22 for grooving and parting with a cutting width of 4 mm and corner radius 0.3 mm, with geometry F, suitable for clamping holder. B. H100. |
Paul Horn S100.0400.FY3 TI22 The insert S100.0400.FY3 TI25 with a cutting width of 4 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0400.N3 HP65 The insert with a cutting width of 4 mm is suitable for parting and grooving. |
Paul Horn S100.0500.E3 TC92 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.E3 TC93 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.E3 TF43 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.E3 TF45 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.E3 TF46 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.E3 TI22 Insert S100.0500.E3 Ti22 for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, with geometry E, suitable for clamping holder. B. H100. |
Paul Horn S100.0500.EN3 ALX3 The insert S100.0500.EN3 AlX3 with a cutting width of 5 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0500.F3 TC93 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0500.F3 TF43 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0500.F3 TF45 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0500.F3 TF46 Insert for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0500.F3 TI22 Insert S100.0500.F3 Ti22 for grooving and parting with a cutting width of 5 mm and corner radius 0.3 mm, for geometry with F, matching clamp holder. B. H100. |
Paul Horn S100.0600.EN6 AS6G The insert with a cutting width of 6 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.0800.EN8 AS6G The insert with a cutting width of 8 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.1000.EN8 AS6G The insert with a cutting width of 10 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.1200.EN8 AS6G The insert with a cutting width of 12 mm is suitable for penetration of external contours and parting. |
Paul Horn S100.1600.EN8 AS6G Insert for grooving and parting with a cutting width of 16 mm and corner radius of 0.8 mm, with geometry EN, matching clamp holder z. B. H100. |
Paul Horn S101.0120.315 AS45 The insert with a cutting width of 1.2 mm is suitable for separating milling. |
Paul Horn S101.0140.315 AS45 The insert with a cutting width of 1.4 mm is suitable for separating milling. |
Paul Horn S101.0160.315AS45 The insert S101.0160.315 AS45 with a cutting width of 1.6 mm is suitable for separating milling. |
Paul Horn S101.0160.E3.R08 AS45 The insert with a cutting width of 1.6 mm is suitable for separating milling. |
Paul Horn S101.0200.320AS45 The insert S101.0200.320 AS45 with a cutting width of 2 mm is suitable for separating milling. |
Paul Horn S101.0200.E3.R10 AS45 The insert with a cutting width of 2 mm is suitable for separating milling. |
Paul Horn S101.0300.E32 AS45 Insert |
Paul Horn S101.0400.E33 AS45 Insert |
Paul Horn S117.0010.00 MG12 The insert with a cutting width of 10 mm is suitable for form-grooving of inner and outer contours with up to 3.5 mm form depth. |
Paul Horn S117.0010.02.00 MG12 The insert with a cutting width of 10 mm is suitable for form-grooving of inner and outer contours with up to 6.5 mm form depth. |
Paul Horn S117.0012.00 H54 The insert with a cutting width of 12 mm is suitable for form-grooving of inner and outer contours with up to 4.5 mm form depth. |
Paul Horn S117.0012.00 MG12 The insert with a cutting width of 12 mm is suitable for form-grooving of inner and outer contours with up to 4.5 mm form depth. |
Paul Horn S117.0012.02.00 MG12 The insert with a cutting width of 12 mm is suitable for form-grooving of inner and outer contours with up to 7.5 mm form depth. |
Paul Horn S117.0014.00 MG12 The insert with a cutting width of 14 mm is suitable for form-grooving of inner and outer contours of up to 6 mm depth form. |
Paul Horn S117.0016.00 MG12 The insert with a cutting width of 16 mm is suitable for form-grooving of inner and outer contours of up to 6 mm depth form. |
Paul Horn S117.0016.02.00 MG12 The insert with a cutting width of 16 mm is suitable for form-grooving of inner and outer contours with up to 9 mm form depth. |
Paul Horn S117.0018.00 MG12 The insert with a cutting width of 18 mm is suitable for form-grooving of inner and outer contours with up to 9 mm form depth. |
Paul Horn S117.0020.00 MG12 The insert with a cutting width of 20 mm is suitable for form-grooving of inner and outer contours with up to 9 mm form depth. |
Paul Horn S117.0020.02.00 MG12 The insert with a cutting width of 20 mm is suitable for form-grooving of inner and outer contours with up to 12 mm form depth. |
Paul Horn S117.0026.00 MG12 The insert with a cutting width of 26 mm is suitable for form-grooving of inner and outer contours with up to 10 mm form depth. |
Paul Horn S117.0026.02.00 MG12 The insert with a cutting width of 26 mm is suitable for form-grooving of inner and outer contours with up to 13 mm form depth. |
Paul Horn S117.0032.00 MG12 The insert with a cutting width of 32 mm is suitable for form-grooving of inner and outer contours with up to 6.5 mm form depth. |
Paul Horn S117.0045.00 MG12 The insert with a cutting width of 45 mm is suitable for form-grooving of inner and outer contours with up to 6.5 mm form depth. |
Paul Horn S117.0298.01.08 The insert TA45 with a cutting width of 2.99 mm is suitable for broaching of inner and outer contours with up to 2 mm depth. |
Paul Horn S117.0300.01.08 TA45 The insert with a cutting width of 3:01 mm is suitable for broaching of inner and outer contours with up to 2 mm depth. |
Paul Horn S117.0310.04.08 TA45 The insert with a cutting width of 3.1 mm is suitable for broaching of inner and outer contours with up to 2 mm depth. |
Paul Horn S117.0397.01.08 The insert TA45 with a cutting width of 3.98 mm is suitable for broaching of inner and outer contours with up to 2.1 mm deep. |
Paul Horn S117.0400.01.08 TA45 The insert with a cutting width of 4:01 mm is suitable for broaching of inner and outer contours with up to 2.1 mm deep. |
Paul Horn S117.0410.05.08 TA45 The insert with a cutting width of 4.12 mm is suitable for broaching of inner and outer contours with up to 2.1 mm deep. |
Paul Horn S117.0497.02.08 The insert TA45 with a cutting width of 4.98 mm is suitable for broaching of inner and outer contours with up to 2.7 mm deep. |
Paul Horn S117.0497.02.10 TA45 The insert with a cutting width of 4.98 mm is suitable for broaching of inner and outer contours with up to 2.7 mm deep. |
Paul Horn S117.0500.02.08 TA45 The insert with a cutting width of 5:01 mm is suitable for broaching of inner and outer contours with up to 2.7 mm deep. |
Paul Horn S117.0500.02.10 TA45 The insert with a cutting width of 5:01 mm is suitable for broaching of inner and outer contours with up to 2.7 mm deep. |
Paul Horn S117.0597.02.10 TA45 The insert with a cutting width of 5.98 mm is suitable for broaching of inner and outer contours with up to 3.4 mm deep. |
Paul Horn S117.0600.02.10 TA45 The insert with a cutting width of 6:01 mm is suitable for broaching of inner and outer contours with up to 3.4 mm deep. |
Paul Horn S117.0610.22 TA45 The insert with a cutting width of 6.12 mm is suitable for broaching of inner and outer contours with up to 2.6 mm deep. |
Paul Horn S117.0610.22 TI25 The insert with a cutting width of 6.12 mm is suitable for broaching of inner and outer contours with up to 2.6 mm deep. |
Paul Horn S117.0710.27 TA45 The insert with a cutting width of 7.13 mm is suitable for broaching of inner and outer contours with up to 3.3 mm deep. |
Paul Horn S117.0710.27 TI25 The insert with a cutting width of 7.13 mm is suitable for broaching of inner and outer contours with up to 3.3 mm deep. |
Paul Horn S117.0796.02.10 TA45 The insert with a cutting width of 7.98 mm is suitable for broaching of inner and outer contours with up to 4.1 mm deep. |
Paul Horn S117.0800.02.10 TA45 The insert with a cutting width of 8:01 mm is suitable for broaching of inner and outer contours with up to 4.1 mm deep. |
Paul Horn S117.0810.32 TA45 The insert with a cutting width of 8.13 mm is suitable for broaching of inner and outer contours with up to 3.4 mm deep. |
Paul Horn S117.0810.32 TI25 The insert with a cutting width of 8.13 mm is suitable for broaching of inner and outer contours with up to 3.4 mm deep. |
Paul Horn S117.0996.03.14 TA45 The insert with a cutting width of 9.98 mm is suitable for broaching of inner and outer contours with up to 4.2 mm deep. |
Paul Horn S117.1000.03.14 TA45 The insert with a cutting width of 1.10 mm is suitable for broaching of inner and outer contours with up to 4.2 mm deep. |
Paul Horn S117.1014.40 TA45 The insert with a cutting width of 10.13 mm is suitable for broaching of inner and outer contours with up to 4.2 mm deep. |
Paul Horn S117.1014.40 TI25 The insert with a cutting width of 10.13 mm is suitable for broaching of inner and outer contours with up to 4.2 mm deep. |
Paul Horn S117.1196.03.14 TA45 The insert with a cutting width of 11.97 mm is suitable for broaching of inner and outer contours with up to 5.7 mm deep. |
Paul Horn S117.1200.03.14 TA45 The insert with a cutting width of 1.12 mm is suitable for broaching of inner and outer contours with up to 5.7 mm deep. |
Paul Horn S117.1200.05.14 TA45 The insert with a cutting width of 12 mm is suitable for broaching of inner and outer contours with up to 8.5 mm deep. |
Paul Horn S117.1214.50 TA45 The insert with a cutting width from 12.15 mm suitable for broaching of inner and outer contours with up to 5.1 mm deep. |
Paul Horn S117.1214.50 TI25 The insert with a cutting width from 12.15 mm suitable for broaching of inner and outer contours with up to 5.1 mm deep. |
Paul Horn S117.1396.03.16 TA45 The insert with a cutting width of 13.97 mm is suitable for broaching of inner and outer contours with up to 6.8 mm deep. |
Paul Horn S117.1400.03.16 TA45 The insert with a cutting width of 14.01 mm is suitable for broaching of inner and outer contours with up to 6.8 mm deep. |
Paul Horn S117.1545.10 TA45 The insert with a cutting width of 1.5 mm is suitable for broaching of inner and outer contours with up to 4.5 mm deep. |
Paul Horn S117.1614.70 TA45 The insert with a cutting width from 12.15 mm suitable for broaching of inner and outer contours with up to 6.6 mm deep. |
Paul Horn S117.2414.100 TA45 The insert with a cutting width from 12.15 mm suitable for broaching of inner and outer contours with up to 8.5 mm deep. |
Paul Horn S117.2445.08 TA45 The insert with a cutting width of 2.4 mm is suitable for broaching of inner and outer contours with up to 4.5 mm deep. |
Paul Horn S117.3045.10 TA45 The insert with a cutting width of 3 mm is suitable for broaching of inner and outer contours with up to 4.5 mm deep. |
Paul Horn S117.6045.14 TA45 The insert with a cutting width of 6 mm is suitable for broaching of inner and outer contours with up to 5.5 mm deep. |
Paul Horn S117.MD06.05K.X0 MD10 The insert S117.MD06.05K.X0 MD10 with a cutting diameter of 6 mm is suitable for high gloss trimming and radius trimming of inner and outer contours. |
Paul Horn S117.MD08.05.M0 MD10 The insert S117.MD08.05P.M0 MD10 with a cutting diameter of 8 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD08.05.X0 MD10 The insert S117.MD08.05P.X0 MD10 with a cutting diameter of 8 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD08.07K.X0 MD10 The insert S117.MD08.07K.X0 MD10 MD10 with a cutting diameter of 8 mm is suitable for high gloss trimming and radius trimming of inner and outer contours. |
Paul Horn S117.MD08.4.05U.M0 MD10 The insert S117.MD08.4.05U.M0 MD10 with a cutting diameter of 8 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.MD08.4.05U.X0 MD10 The insert S117.MD08.4.05U.X0 MD10 with a cutting diameter of 8 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.MD10.07.M0 MD10 The insert S117.MD10.07P.M0 MD10 with a cutting diameter of 10 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD10.07.X0 MD10 The insert S117.MD10.07P.X0 MD10 with a cutting diameter of 10 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD10.09K.X0 MD10 The insert S117.MD10.09K.X0 MD10 with a cutting diameter of 10 mm is suitable for high gloss trimming and radius trimming of inner and outer contours. |
Paul Horn S117.MD10.5.07U.M0 MD10 The insert S117.MD10.5.07U.M0 MD10 with a cutting diameter of 10 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.MD10.5.07U.X0 MD10 The insert S117.MD10.5.07U.X0 MD10 with a cutting diameter of 10 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.MD12.09P.M0 MD10 The insert with a cutting diameter of 12 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD12.09P.X0 MD10 The insert with a cutting diameter of 12 mm is suitable for glossy milling and face milling of internal and external contours. |
Paul Horn S117.MD12.5.09U.M0 MD10 The insert S117.MD12.5.09U.M0 MD10 with a cutting diameter of 12 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.MD12.5.09U.X0 MD10 The insert S117.MD12.5.09U.X0 MD10 with a cutting diameter of 12 mm is suitable for glossy milling and peripheral milling of internal and external contours. |
Paul Horn S117.SW14.08 TI25 Insert |
Paul Horn S117.SW16.10 TI25 Insert |
Paul Horn S117.SW24.12 TI25 Insert |
Paul Horn S117P.MD10.300.M0 MD10 The insert suitable for milling. |
Paul Horn S117P.MD10.300.X0 MD10 The insert suitable for milling. |
Paul Horn S119.0200.32 TN35 The insert with a cutting width of 2 mm is suitable for penetration of inner edges up to 3 mm in depth. |
Paul Horn S119.0250.32 TN35 The insert with a cutting width of 2.5 mm is suitable for penetration of inner edges up to 3 mm in depth. |
Paul Horn S119.0300.32 TN35 The insert with a cutting width of 3 mm is suitable for penetration of inner edges up to 3 mm in depth. |
Paul Horn S123.0020.C0 TF45 The insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 25 mm depth. |
Paul Horn S123.0020.C0 TN35 The insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 25 mm depth. |
Paul Horn S123.0020.C1 TF45 The insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 25 mm depth. |
Paul Horn S123.0020.C1 TI25 Insert for grooving and parting with a cutting width of 2 mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S123.0020.C1 TN35 Insert for grooving and parting with a cutting width of 2 mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S123.0030.C0 TN35 Insert for grooving and parting with a cutting width of 3 mm, geometry C0, matching clamp holder z. B. H223. |
Paul Horn S123.0030.C1 TN35 Insert for grooving and parting with a cutting width of 3 mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S129.0500.36 AS65 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with depths greater than 25 mm. |
Paul Horn S129.0600.A8 AS62 The indexable insert with a cutting width of 6 mm is suitable for grooving and turning of internal and external contours with depths greater than 25 mm. |
Paul Horn S15A.0200.10.10 TH35 Insert for axial grooving with a cutting width of 2 mm and full radius 1 mm, geometry VR, matching clamp holder z. B. H25A. |
Paul Horn S15A.0200.12 TH35 Insert for axial grooving with a cutting width of 2 mm and 0.2 mm corner radius, geometry 0, matching clamp holder for. B. H25A. |
Paul Horn S15A.0300.10.15 TH35 Insert for axial grooving with a cutting width of 3 mm and full radius 1.5 mm, geometry VR, matching clamp holder z. B. H25A. |
Paul Horn S15A.0300.12 TH35 Insert for axial grooving with a cutting width of 3 mm and corner radius 0.2 mm, geometry 0, matching clamp holder for. B. H25A. |
Paul Horn S15A.0400.10.20 TH35 Insert for axial grooving with a cutting width of 4 mm and full radius 2 mm, geometry VR, matching clamp holder z. B. H25A. |
Paul Horn S15A.0400.12 TH35 Insert for axial grooving with a cutting width of 4 mm and corner radius 0.2 mm, geometry 0, matching clamp holder for. B. H25A. |
Paul Horn S209.0010.KF2 AS45 The indexable insert S209.0010.KF2 AS445 with a cutting width of 2 mm is suitable for grooving and turning up to 7 mm depth. |
Paul Horn S216.0010.KF2 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0015.KF3 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0020.KF4 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0200.1A2 AS45 Indexable insert for grooving and turning with a cutting width of 2 mm and 0.2 mm corner radius, geometry .A, matching clamp holder z. B. ???. |
Paul Horn S216.0200.52 AS45 Indexable insert for grooving and turning with a cutting width of 2 mm and 0.2 mm corner radius, geometry .5, matching clamp holder z. B. ???. |
Paul Horn S216.0250.1A2 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0250.52 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0300.1A2 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0300.52 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0500.1A4 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0500.54 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0600.1A4 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S216.0600.54 AS45 Indexable insert TiAlN nano-structured coated carbide insert |
Paul Horn S223.0020.C0 TF45 The indexable insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0020.C0 TI25 Indexable insert for grooving and turning with a cutting width of 2 mm and corner radius 0.15mm, geometry C0, matching clamp holder z. B. H223. |
Paul Horn S223.0020.C0 TN35 Indexable insert for grooving and turning with a cutting width of 2 mm and corner radius 0.15mm, geometry C0, matching clamp holder z. B. H223. |
Paul Horn S223.0020.C1 TF45 The indexable insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0020.C1 TI25 The indexable insert with a cutting width of 2 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0020.C1 TN35 Indexable insert for grooving and turning with a cutting width of 2 mm and corner radius 0.15mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S223.0025.C0 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0025.C1 TF45 Indexable insert for grooving and turning with a cutting width of 2.5 mm and corner radius 0.15mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S223.0025.C1 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0025.C1 TN35 Indexable insert for grooving and turning with a cutting width of 2.5 mm and corner radius 0.15mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S223.0030.C0 TF45 Indexable insert for grooving and turning with a cutting width of 3 mm and corner radius 0.15mm, geometry C0, matching clamp holder z. B. H223. |
Paul Horn S223.0030.C0 TI25 The indexable insert with a cutting width of 3 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0030.C0 TN35 Indexable insert for grooving and turning with a cutting width of 3 mm and corner radius 0.15mm, geometry C0, matching clamp holder z. B. H223. |
Paul Horn S223.0030.C1 TF45 The indexable insert with a cutting width of 3 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0030.C1 TI25 Indexable insert for grooving and turning with a cutting width of 3 mm and corner radius 0.15mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S223.0030.C1 TN35 Indexable insert for grooving and turning with a cutting width of 3 mm and corner radius 0.15mm, geometry C1, matching clamp holder for. B. H223. |
Paul Horn S223.0110.32 TN35 The indexable insert with a cutting width of 1.24 mm is suitable for grooving of the inner and outer contours up to 0.6 mm deep. |
Paul Horn S223.0130.32 TN35 The indexable insert with a cutting width of 1.44 mm is suitable for grooving of the inner and outer contours up to 1.1 mm deep. |
Paul Horn S223.0160.32 TN35 The indexable insert with a cutting width of 1.74 mm is suitable for grooving of internal and external contours to 1:15 mm depth. |
Paul Horn S223.0185.32 TN35 The indexable insert with a cutting width of 1.99 mm is suitable for grooving of the inner and outer contours up to 1.4 mm deep. |
Paul Horn S223.0200.32 H54 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0200.32 MG12 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0200.32 TI25 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0200.32 TN35 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0200.52 TH35 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0215.32 TN35 The indexable insert with a cutting width of 2.29 mm is suitable for grooving of the inner and outer contours up to 1.65 mm depth. |
Paul Horn S223.0250.32 H54 The indexable insert with a cutting width of 2.5 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0250.32 MG12 Indexable insert for grooving and turning with a cutting width of 2.5 mm and 0.2 mm corner radius, geometry 32, matching clamp holder for. B. H223. |
Paul Horn S223.0250.32 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0250.32 TN35 The indexable insert with a cutting width of 2.5 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0250.52 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0300.32 H54 The indexable insert with a cutting width of 3 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0300.32 MG12 The indexable insert with a cutting width of 3 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0300.32 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.0300.32 TN35 The indexable insert with a cutting width of 3 mm is suitable for penetration of inner and outer contours and for tapping up to 11 mm depth. |
Paul Horn S223.0300.52 TH35 The indexable insert with a cutting width of 3 mm is suitable for grooving of the inner and outer contours up to 11 mm depth. |
Paul Horn S223.NC20.D2 TI25 The indexable insert with a cutting width of 2 mm is suitable for grooving of the inner and outer contours up to 10 mm depth. |
Paul Horn S224.0010.K2 AS62 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours. |
Paul Horn S224.0010.K2 AS66 Indexable insert for grooving and turning with a cutting width of 2 mm and full radius 1 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0010.K2 TF42 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours. |
Paul Horn S224.0015.K3 AL96 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0015.K3 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm and full radius 1.5 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0015.K3 AS66 Indexable insert for grooving and turning with a cutting width of 3 mm and full radius 1.5 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0015.K3 TC92 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0015.K3 TF42 Indexable insert for grooving and turning with a cutting width of 3 mm and full radius 1.5 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0015.K3 TN32 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0015.KF3 AS66 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0020.C0 TF45 Indexable insert for grooving and turning with a cutting width of 2 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.C0 TI25 Indexable insert for grooving and turning with a cutting width of 2 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.C0 TN35 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0020.C1 TC92 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0020.C1 TF45 Indexable insert for grooving and turning with a cutting width of 2 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.C1 TI25 Indexable insert for grooving and turning with a cutting width of 2 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.C1 TN35 Indexable insert for grooving and turning with a cutting width of 2 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.K4 AL96 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0020.K4 AS62 Indexable insert for grooving and turning with a cutting width of 4 mm, full radius 2 mm and maximum groove depth of 18 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.K4 AS66 Indexable insert for grooving and turning with a cutting width of 4 mm, full radius 2 mm and maximum groove depth of 18 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.K4 TC92 Indexable insert for grooving and turning with a cutting width of 4 mm, full radius 2 mm and maximum groove depth of 18 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0020.K4 TF42 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0020.K4 TN32 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0020.KF4 AS66 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.C0 TF45 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0025.C0 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0025.C0 TN35 Indexable insert for grooving and turning with a cutting width of 2.5 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0025.C1 TF45 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0025.C1 TI25 Indexable insert for grooving and turning with a cutting width of 2.5 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0025.K5 AL96 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.K5 AS62 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.K5 AS66 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.K5 TC92 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.K5 TF42 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.K5 TN32 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0025.KF5 AS66 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0030.C0 TF45 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0030.C0 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0030.C0 TN35 Indexable insert for grooving and turning with a cutting width of 3 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0030.C1 TC92 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0030.C1 TF45 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0030.C1 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0030.C1 TN35 Indexable insert for grooving and turning with a cutting width of 3 mm and a maximum groove depth of 18 mm, geometry C, suitable for clamping holder. B. H224. |
Paul Horn S224.0030.K6 AS62 The indexable insert with a cutting width of 6 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0030.K6 AS66 Indexable insert for grooving and turning with a cutting width of 6 mm, full radius 3 mm and maximum groove depth of 18 mm, geometry K, suitable for clamping holder. B. H224. |
Paul Horn S224.0030.KF6 AS66 The indexable insert with a cutting width of 6 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.52 AS62 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.52 AS66 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0200.D2 H54 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.D2 TF45 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving of the inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0200.D2 TF46 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.D2 TI25 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.D2 TN32 The indexable insert with a cutting width of 2 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0200.D2 TN35 Indexable insert B. H224 for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder.. |
Paul Horn S224.0200.D2.G TF46 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.D2.G TI22 Indexable insert S224.0200.D2.G Ti22 for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.E2 AS62 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.E2 TC92 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S224.0200.E2 TC93 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.E2 TF43 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S224.0200.E2 TF45 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S224.0200.EN2 AS62 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0200.F2 TF43 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S224.0200.F2 TF45 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.F2 TF46 Indexable insert for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.F2 TI22 Indexable insert S224.0200.F2 Ti22 for grooving and turning with a cutting width of 2 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0200.F2 TI25 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving. |
Paul Horn S224.0200.FY2 TI25 The indexable insert with a cutting width of 2 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0200.WA2 DD26 The coated indexable insert with a cutting width of 2 mm is suitable for grooving and parting for aluminum. |
Paul Horn S224.0200.WA2 K10 The uncoated indexable insert with a cutting width of 2 mm is suitable for grooving and parting for aluminum. |
Paul Horn S224.0250.52 AS62 The indexable insert with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0250.52 AS66 Indexable insert for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0250.D2 TF45 The indexable insert with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0250.D2 TF46 Indexable insert for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0250.D2 TI25 Indexable insert B. H224 for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder.. |
Paul Horn S224.0250.D2 TN32 The indexable insert with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0250.D2 TN35 Indexable insert B. H224 for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder.. |
Paul Horn S224.0250.D2.G TF46 The indexable insert with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0250.D2.G TI22 The indexable insert S224.0250.D2.G Ti22 with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0250.E2 AS62 Indexable insert for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0250.E2 TC92 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving. |
Paul Horn S224.0250.E2 TF43 Indexable insert for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0250.E2 TF45 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving. |
Paul Horn S224.0250.EN2 AS62 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0250.F2 TF43 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving. |
Paul Horn S224.0250.F2 TF45 The indexable insert with a cutting width of 2.5 mm is suitable for parting and grooving. |
Paul Horn S224.0250.F2 TF46 Indexable insert for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0250.F2 TI22 Indexable insert S224.0250.F2 Ti22 for grooving and turning with a cutting width of 2.5 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0250.FY2 TI25 The indexable insert with a cutting width of 2.5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 AL96 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 AS62 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 AS66 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 TC92 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 TI22 The indexable insert S224.0300.32 Ti22 with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 TI25 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.32 TN32 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.32 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.34 AL96 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.34 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.34 AS66 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.34 TC92 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.34 TF45 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.34 TI22 The indexable insert S224.0300.34 Ti22 with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.34 TI25 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.34 TN32 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0300.34 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.3V2 AS45 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3V, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.3V2.IK HP65 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry 3V, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.52 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.52 AS66 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.52 TC92 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.52 TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.52 TI25 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.52 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.54 AL96 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.54 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.54 AS66 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.54 TC92 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.54 TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.54 TI25 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.54 TN32 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0300.54 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.A2 AL96 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.A2 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A2 TC92 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A2 TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.A2 TI22 The indexable insert S224.0300.A2 Ti22 with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.A2 TI25 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A2 TN32 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A2 TN35 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 AS62 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TC92 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TF45 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TI22 Indexable insert S224.0300.A4 Ti22 for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TI25 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TN32 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.A4 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2 H54 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2 TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2 TF46 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.D2 TI25 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2 TN32 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.D2 TN35 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2.G TF45 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.D2.G TF46 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.D2.G TI22 The indexable insert S224.0300.D2.G Ti22 with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0300.E2 AS62 The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours. |
Paul Horn S224.0300.E2 TC92 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving of the inner and outer contours. |
Paul Horn S224.0300.E2 TC93 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.E2 TF43 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving of the inner and outer contours. |
Paul Horn S224.0300.E2 TF45 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.E2 TI22 Indexable insert S224.0300.E2 Ti22 for grooving and turning with a cutting width of 3 mm, corner radius 0.2 mm and maximum groove depth of 0 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.E2 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.E4 AS62 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0300.E4 TF43 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.E4 TF45 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0300.EN2 AS62 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0300.F2 TF43 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.F2 TF45 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.F2 TF46 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.F2 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving. |
Paul Horn S224.0300.F4 TF45 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.FY2 TI25 The indexable insert with a cutting width of 3 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0300.H4 AL96 The indexable insert with a cutting width of 3 mm is suitable for penetration of inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0300.H4 TF42 The indexable insert with a cutting width of 3 mm is suitable for penetration of inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0300.L4 AS66 Indexable insert for grooving and turning with a cutting width of 3 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, L geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0300.WA2 DD26 The coated indexable insert with a cutting width of 3 mm is suitable for grooving and parting for aluminum. |
Paul Horn S224.0300.WA2 K10 The uncoated indexable insert with a cutting width of 3 mm is suitable for grooving and parting for aluminum. |
Paul Horn S224.0300.ZG2 ALXT The indexable insert with a cutting width of 3 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.32 AS62 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.32 AS66 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.32 TF45 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.32 TI22 Indexable insert S224.0400.32 Ti22 for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.32 TI25 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.32 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.32 TN35 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 AL96 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.34 AS62 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 AS66 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 TC92 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 TI22 Indexable insert S224.0400.34 Ti22 for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 TI25 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.34 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0400.34 TN35 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.3V3 AS45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.3 mm and maximum groove depth of 18 mm, geometry 3V, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.52 AL96 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.52 AS62 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.52 AS66 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.52 TC92 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.52 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.52 TI25 The indexable insert with a cutting width of 4 mm is suitable for grooving of the inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0400.52 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.52 TN35 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.54 AL96 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.54 AS62 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.54 AS66 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.54 TC92 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.54 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.54 TI25 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.54 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0400.54 TN35 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.A2 AS62 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.A2 TF45 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.A2 TI25 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A2 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A2 TN35 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A4 AS62 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.A4 TC92 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A4 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A4 TI25 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A4 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, Geometry A, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.A4 TN35 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.D2 TF45 Indexable insert B. H224 for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder.. |
Paul Horn S224.0400.D2 TF46 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.D2 TI25 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.D2 TN32 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.D2 TN35 Indexable insert B. H224 for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, D geometry, suitable for clamping holder.. |
Paul Horn S224.0400.D2.G TF46 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.D2.G TI22 The indexable insert S224.0400.D2.G Ti22 with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.E2 AS62 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.E2 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.E4 AS62 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.E4 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry E, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.F2 TF45 The indexable insert with a cutting width of 4 mm is suitable for parting and grooving up to 18 mm depth. |
Paul Horn S224.0400.F2 TI22 Indexable insert S224.0400.F2 Ti22 for grooving and turning with a cutting width of 4 mm, corner radius 0.2 mm and maximum groove depth of 18 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.F4 TF45 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry F, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.H4 AL96 The indexable insert with a cutting width of 4 mm is suitable for penetration of inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0400.H4 TF42 The indexable insert with a cutting width of 4 mm is suitable for penetration of inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0400.L4 AL96 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.L4 AS62 The indexable insert with a cutting width of 4 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0400.L4 TF42 Indexable insert for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, L geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0400.L4 TI22 Indexable insert S224.0400.L4 Ti22 for grooving and turning with a cutting width of 4 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, L geometry, suitable for clamping holder. B. H224. |
Paul Horn S224.0500.34 AL96 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 AS62 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.34 AS66 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TC92 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TF45 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TI22 The indexable insert S224.0500.34 Ti22 with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TI25 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TN32 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.34 TN35 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.38 AS62 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.8 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.38 AS66 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.8 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.38 TC92 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |
Paul Horn S224.0500.38 TF45 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.8 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.38 TI25 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.8 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.38 TN35 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.8 mm and maximum groove depth of 18 mm, geometry 3, matching clamp holder for. B. H224. |
Paul Horn S224.0500.54 AS62 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 AS66 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 TC92 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 TF45 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 TI25 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 TN32 Indexable insert for grooving and turning with a cutting width of 5 mm, corner radius 0.4 mm and maximum groove depth of 18 mm, geometry 5, matching clamp holder z. B. H224. |
Paul Horn S224.0500.54 TN35 The indexable insert with a cutting width of 5 mm is suitable for grooving of the inner and outer contours with up to 18 mm depth. |
Paul Horn S224.0500.58 AL96 The indexable insert with a cutting width of 5 mm is suitable for grooving and turning of internal and external contours with up to 18 mm depth. |