|
ISCAR EC-A2 040-050/20C6R.2H55 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-050/20C6R.3H55 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-050/20C6R.5H55 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/12C6H50 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/12C6M50 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/16C6H60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/16C6M60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/20C6H60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/20C6M60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/25C6H70 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/25C6M70 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/30C6H70 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 040-060/30C6M70 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/35C6M80 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/40C6M90 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/45C6M90 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-060/50C6M100 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 040-11C06-45 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 04-05W06E54 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 04-12C04E50 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 04-30C04E75 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 045-05W06E54 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 045-11C06-45 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 045-14C045E50 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 050-075/16C6M60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/20C6M60 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/25C6M70 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/30C6M80 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/35C6M80 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/40C6M80 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-075/50C6M110 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 050-13C06-50 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 05-06W06E54 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 05-14C05E50 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 05-40C05E100 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 055-13C06-50 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 055-16C055E50 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 060-070/20C6R.3H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 060-070/20C6R.5H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 060-070/20C6R1.5H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 060-070/20C6R1.H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 060-070/20C6R2.H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 060-090/20C6M80 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 060-090/30C6M90 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 060-090/40C6M100 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 060-090/50C6M110 2 Flute, 30В° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 55 HRc |
|
ISCAR EC-A2 060-13C06-50 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 06-07W06E54 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 06-16C06E50 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 06-50C06E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 065-16C08-60 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 070-16C08-60 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 07-08W08E58 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 07-20C07E60 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 075-16C08-60 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 080-090/25C8R.3H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 080-090/25C8R.5H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 080-090/25C8R1.5H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 080-090/25C8R1.H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 080-090/25C8R2.H60 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 080-19C08-60 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 08-09W08E58 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 08-20C08E63 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 08-50C08E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 085-19C10-70 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 090-19C10-70 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 09-10W10E66 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 09-20C09E60 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 095-19C10-70 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 100-090/32C10R.3H70 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 100-11/32C10R1.5H70 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 100-110/32C10R.5H70 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 100-110/32C10R1.H70 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 100-110/32C10R2.H70 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 100-22C10-70 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 10-11W10E66 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 10-22C10E72 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 105-22C12-75 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 10-60C10E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 110-22C12-75 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 115-22C12-75 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 120-12/38C12R1.5H80 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 120-120/38C12R.5H80 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 120-120/38C12R1.H80 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 120-120/38C12R2H80 2 Flute, 30В° Helix and Corner Radii Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRC |
|
ISCAR EC-A2 120-26C12-75 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 12-12W12E73 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 12-22C12E70 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 12-75C12E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 130-26C12-85 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 140-26C14-85 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 14-14W14E75 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 14-25C14E75 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 14-65C14E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 150-26C16-90 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 160-32C16-100 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 16-16W16E82 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 16-25C16E75 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 16-65C16E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 170-32C16-100 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 180-32C18-100 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 18-18W18E84 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 18-65C18E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 190-32C20-100 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 200-38C20-105 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 20-20W20E92 Economical Type 2 Flute, 30В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A2 20-32C20E100 Economical Type 2 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A2 20-65C20E150 Economical Type 2 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A2 220-38C20-105 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A2 250-45C25-120 2 Flute, 30В° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR ECA200B38-2C20 2 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA200F38-2C20 2 Flute, 55В° Helix Medium Length Solid Carbide Endmills for Machining Aluminum |
|
ISCAR ECA250F45-2C25 2 Flute, 55В° Helix Medium Length Solid Carbide Endmills for Machining Aluminum |
|
ISCAR EC-A3 005-015C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 006-015C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 008-02C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 01-02C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 012-02C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 015-02C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 018-02C03E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 035-06W06E37 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 035-12C035E32 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 045-08W06E38 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 045-14C045E50 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 05-08W06E39 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 055-08W06E39 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 055-16C055E50 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 0675-10W08E42 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 07-10W08E42 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 087-11W10E48 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 09-11W10E48 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 09-20C09E60 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 097-11W10E48 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 14-25C14E75 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 16-18W16E62 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A3 16-25C16E75 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-A3 18-20W18E70 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-A4 020-060C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 02-08C02E32 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 025-080C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 025-08C025E32 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 030-080C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 03-12C03E38 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 03-30C03E75 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 035-10C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 035-12C035E32 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 040-11C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 04-12C04E50 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 04-30C04E75 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 045-11C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 045-14C045E50 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 050-13C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 05-14C05E50 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 05-40C05E100 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 055-13C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 055-16C055E50 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 060-13C06-50 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 06-16C06E50 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 06-50C06E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 065-16C08-63 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 070-16C08-63 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 07-20C07E60 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 075-16C08-63 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 080-19C08-63 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 08-20C08E63 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 08-50C08E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 085-19C10-72 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 090-19C10-72 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 09-20C09E60 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 095-19C10-70 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 100-22C10-72 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 10-22C10E72 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 105-22C12-75 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 10-60C10E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 110-22C12-75 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 115-22C12-75 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 120-26C12-73 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 12-22C12E73 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 12-75C12E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 130-26C12-85 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 140-26C12-85 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 140-26C14-83 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 140-26C16-85 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 14-25C14E83 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 14-65C14E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 150-26C16-92 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 160-32C16-92 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 16-25C16E82 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 16-65C16E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 170-32C16-100 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 180-32C18-100 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 18-65C18E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 190-32C20-100 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 200-38C20-104 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 20-32C20E104 Economical Type 4 Flute, 30В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-A4 20-65C20E150 Economical Type 4 Flute, 30В° Helix Center Cutting Extra Long Solid Carbide Endmills |
|
ISCAR EC-A4 220-38C20-105 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 240-45C25-120 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR EC-A4 250-45C25-120 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc |
|
ISCAR ECA-B-3 04-12C06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 04-12W06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 05-14C06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 05-14W06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 06-16C06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 06-16W06-57 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 08-20C08-63 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 08-20W08-63 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 10-22C10-72 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 10-22W10-72 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 12-25C12-83 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 12-25W12-83 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 14-30C14-83 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 14-30W14-83 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 16-32C16-92 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 16-32W16-92 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 20-38C20-104 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-B-3 20-38W20-104 3 Flute, 45В° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum |
|
ISCAR ECA-H3 015-04/06C06CF-R01 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 02-05/08C06CF-R01 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 025-05/08C06CF-R01 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 03-07/12C06CF-R01 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 04-10/16C06CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 05-12/20C06CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/18C06CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/18C06CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/18C06CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/30C06CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/30C06CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-09/30C06CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 06-12/18C06CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 06-12/30C06CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 06-14/24C06CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/24C08CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/24C08CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/24C08CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/40C08CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/40C08CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-12/40C08CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 08-16/24C08CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 08-16/40C08CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 08-18/32C08CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/30C10CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/30C10CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/30C10CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/30C10CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/30C10CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-15/50C10CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-20/30C10CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 10-20/50C10CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 10-22/40C10CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 10-22/40C10CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R25 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/36C12CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R25 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-18/60C12CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 12-24/36C12CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 12-24/60C12CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 12-26/48C12CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R25 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/48C16CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R25 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R30 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-24/80C16CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 16-32/48C16CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 16-32/80C16CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 16-34/64C16CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/100C20CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-30/60C20CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 20-40/60C20CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 20-42/80C20CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R08 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/125C25CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R04 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R16 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R20 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R32 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R40 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-38/75C25CF-R50 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H3 25-50/75C25CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H3 25-52/100C25CF-R02 Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum |
|
ISCAR ECA-H320-40/100C20CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H325-50/125C25CF-R02C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant holes, and Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 06-09/30C06CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 06-12/18C06CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 08-12/40C08CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 08-16/24C08CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 10-15/50C10CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 10-20/30C10CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 12-18/60C12CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 12-24/36C12CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 16-24/80C16CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 16-32/48C16CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 20-30/100C20CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 20-40/60C20CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 25-38/125C25CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECA-H4 25-50/75C25CFR02 Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum |
|
ISCAR ECAP-H3 10-15/50C10CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 10-22/40C10CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 12-18/60C12CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 12-26/48C12CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 16-24/80C16CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 16-34/64C16CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H3 20-42/80C20CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H320-30/100C20CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H325-38/125C25CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR ECAP-H325-52/100C25CFR02C Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum |
|
ISCAR EC-B3 015-03C03E38 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 02-03W06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 03-04W06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 03-08C06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 035-04W06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 04-05W06E54 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 04-11C06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 045-05W06E54 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 05-06C06E57 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 05-13C06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 06-07W06E54 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 06-13C06E50 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 07-08W08E58 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 08-09W08E58 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 08-19C08E63 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 09-10W10E66 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 10-11W10E66 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 10-22C10E72 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 12-12W12E73 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 12-26C12E73 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 14-14W14E75 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 14-26C14E75 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 16-16W16E82 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 16-25C16E75 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B3 18-18W18E84 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 20-20W20E92 Economical Type 3 Flute, 45В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-B3 20-32C20E100 Economical Type 3 Flute, 45В° Helix Center Cutting Medium Length Solid Carbide Endmills |
|
ISCAR EC-B4 10-15C08R.5M130 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 10-15C08R1M130 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 12-18C10R.5M150 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 12-18C10R1M150 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 14-21C12R.5M160 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 14-21C12R1M160 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 18-27C16R0.5M180 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 18-27C16R1M180 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 22-33C20R.5M200 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B4 22-33C20R1M200 4 Flute, 45В° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel |
|
ISCAR EC-B6 060-026C06-70 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 06-06/14C06R.25H50 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 06-06/14C06R.5H50 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 06-13C06R.5H70 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 06-26C06R.5H70 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 080-036C08-90 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 08-08/24C08R.5H60 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 08-19C08R.5H90 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 08-36C08R.5H90 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 100-46C10-100 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 10-10/30C10R1H70 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 10-22C10R.5H100 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 10-22C10R1H100 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 10-46C10R1H100 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 120-56C12-110 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 12-12/30C12R1H75 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 12-26C12R.5H110 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 12-26C12R1H110 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 12-56C12R1H110 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 160-66C16-130 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 16-32C16R1.5H130 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 16-32C16R1H130 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 16-66C16R1.5H130 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 200-76C20-140 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-B6 20-38C20R1.5H140 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 20-38C20R1H140 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 20-38C20R2H140 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 20-76C20R2H140 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRC |
|
ISCAR EC-B6 250-92C25-180 6 Flute, 45В° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR ECC020B07-2C03 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC020B07-3C03 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC020B07-4C03 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC025A07-2C03 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC025A07-4C03 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC025E07-3C03 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC030A10-2C03 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC030A10-4C03 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC030E10-3C03 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC035A12-2C04 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC035A12-4C04 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC035E12-3C04 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC040A12-2C04 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC040A12-4C04 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC040E12-3C04 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC050A14-2C05 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC050A14-4C05 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC050E14-3C05 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC060A16-2C06 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC060A16-2W06 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC060A16-4C06 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC060E16-3C06 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC060E16-3W06 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC080A20-2C08 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC080A20-4C08 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC080A20-4W08 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC080E20-3C08 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC080E20-3W08 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC100A22-2C10 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC100A22-4C10 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC100A22-4W10 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC100E22-3C10 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC100E22-3W10 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC120A25-2C12 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC120A25-4C12 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC120A25-4W12 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC120E25-3C12 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC120E25-3W12 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC160A32-2C16 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC160A32-4C16 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC160A32-4W16 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC160E32-3C16 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC160E32-3W16 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC200A38 4W20 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC200A38-2C20 2 Flute, 30В° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners |
|
ISCAR ECC200A38-4C20 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC200A38-4W20 4 Flute, 30В° Helix Medium Length Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC200E38-3C20 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECC200E38-3W20 3 Flute, 38 and 45В° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners |
|
ISCAR ECCENTER SLEEVE 20X25 Used for Enlarging or Reducing DR Nominal Drilling Diameter by Shifting the Drill Off-center |
|
ISCAR ECCENTER SLEEVE 25X32 Used for Enlarging or Reducing DR Nominal Drilling Diameter by Shifting the Drill Off-center |
|
ISCAR ECCENTER SLEEVE 32X40 Used for Enlarging or Reducing DR Nominal Drilling Diameter by Shifting the Drill Off-center |
|
ISCAR ECCENTER SLEEVE 40X50 Used for Enlarging or Reducing DR Nominal Drilling Diameter by Shifting the Drill Off-center |
|
ISCAR ECCS060E07-3W06-57 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS070E08-3W08-63 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS080E09-3W08-63 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS090E10-3W10-72 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS100E11-3W10-72 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS120E12-3W12-83 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR ECCS160E16-3W16-92 3 Flute 38В° Helix with 3xD Relieved Necks, Short Solid Carbide Slot / Drill Endmills, with Chamfered Corners |
|
ISCAR EC-D6 06-13C06H57 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 08-20C08H63 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 10-22C10H72 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 12-25C12H83 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 12-25W12H83 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 14-30C14H83 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 16-32C16H92 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR EC-D6 20-38C20H104 6 Flute, 50В° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc |
|
ISCAR ECD-S2 030/90C03-38 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 040/90C04-50 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 050/90C05-50 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 060/90C06-57 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 080/90C08-63 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 100/90C10-72 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR ECD-S2 120/90C12-73 45В° Chamfering and Spot Drilling Solid Carbide Tools |
|
ISCAR EC-E3 02-04C06E35 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
|
ISCAR EC-E3 02-08C02E32 Economical Type 3 Flute, 30В° and 38В° Helix, Center Cutting, Medium Length Solid Carbide Endmills |
|
ISCAR EC-E3 025-05C06E36 Economical Type 3 Flute, 30В° and 38В° Helix Center Cutting Short Solid Carbide Endmills |
