|
ISCAR ERC250E45-3W25 Solid Carbide Roughing Endmills with 3 Flute 38В° Helix, Medium Length and 3xD Relieved Necks, for Machining Aluminum |
|
ISCAR ERCM D32-C25-CP12 Multifunctional Coarse Pitch Endmills for Four Insert Shapes |
|
ISCAR ERCM D32-C32-CP12 Multifunctional Coarse Pitch Endmills for Four Insert Shapes |
|
ISCAR ERCM D32-M16-12 Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners |
|
ISCAR ERCM D40-C32-CP12 Multifunctional Coarse Pitch Endmills for Four Insert Shapes |
|
ISCAR ERCM D40-M16-12 Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners |
|
ISCAR ERF040E08-3C06 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF050E10-3C06 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF060E13-3C06 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF060E13-3W06 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF070E20-3C08 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF080E20-3C08 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF080E20-3W08 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF090A22-4C10 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF100A22-4C10 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF100A22-4W10 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF110A25-4C12 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF120A25-4C12 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF120A25-4W12 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF130A25-4C14 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF140A25-4C14 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF140A25-4W14 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF160A32-4C16 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF160A32-4W16 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF180A32-4C18 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF180A32-4W18 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF200A38-4C20 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF200A38-4W20 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERF250A45-6W25 3, 4, and 6 Flute, 30В° and 38В° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel |
|
ISCAR ERW D013A025-2-M12-12 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D013A025-2-MMT15-12 Rough Profiling Tools with a MULTI-MASTER Adaptation |
|
ISCAR ERW D013A025-B-2-C25-12 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D015A025-3-M12-10 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D015A025-B-3-C25-10 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D020A032-3-M16-12 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D020A032-A-3-C25-12 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D020A032-B-3-C32-12 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D022A032-4-M16-10 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D022A032-A-4-C25-10 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D028A040-4-M16-12 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D028A040-A-4-C32-12 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ERW D030A040-5-M16-10 Rough Profiling Tools with a FLEXFIT Adaptation |
|
ISCAR ERW D030A040-A-5-C32-10 Rough Profiling Endmills with Serrated or Regular Round Inserts |
|
ISCAR ESB-A2 03 02/30C06M80 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 04 03/30C06M80 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 05 03/38C06M80 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 06 04/28C06M100 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 08 06/33C08M100 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 10 07/40C10M100 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A2 16 12/59C16M150 2 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc |
|
ISCAR ESB-A4 05 3/38C06M80 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ESB-A4 06 4/28C06M100 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ESB-A4 08 6/33C08M100 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ESB-A4 10 7/40C10M100 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ESB-A4 12 9/49C12M100 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ESB-A4 16 12/59C16M150 4 Flute, 30В° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc |
|
ISCAR ETR-A2 02-2/08C06R.5M80 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 03-2/12C06R.5M80 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 04-3/16C06R1M80 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 06-4/25C08R2M100 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 08-4/32C08R2M100 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 08-4/32C10R2M120 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 10-6/40C10R3M120 2 Flute Toroidal Endmills |
|
ISCAR ETR-A2 10-6/40C12R3M160 2 Flute Toroidal Endmills |
|
ISCAR ETS D032-03-LN08-M08 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D032-03-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D032-04-LN08-M08 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D032-04-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D032-05-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D032-05-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D032-06-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D032-06-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D032-07-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D040-03-LN08-M08 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D040-03-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D040-04-LN08-M08 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D040-04-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D040-05-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D040-05-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D040-06-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D040-06-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D040-07-W16-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D050-03-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D050-03-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D050-04-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D050-04-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D050-05-LN08-M12 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D050-05-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D050-06-LN08-M12 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D050-06-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D050-07-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D063-03-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D063-03-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D063-04-LN08-M10 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D063-04-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D063-05-LN08-M12 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D063-05-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D063-06-LN08-M12 Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation |
|
ISCAR ETS D063-06-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D063-07-W20-LN08 Grooving and Slitting Cutters |
|
ISCAR ETS D21-9-W16-06 T-Slot Endmills |
|
ISCAR ETS D25-11-W16-06 T-Slot Endmills |
|
ISCAR ETS D25-11-W25-06 T-Slot Endmills |
|
ISCAR ETS D32/1.26-4-LN08-MMT10 Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation |
|
ISCAR ETS D32-14-W16-10 T-Slot Endmills |
|
ISCAR ETS D32-14-W32-10 T-Slot Endmills |
|
ISCAR ETS D32-16-W32-A10 T-Slot Endmills |
|
ISCAR ETS D40/1.57-4-LN08-MMT12 Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation |
|
ISCAR ETS D40-18-W32-10 T-Slot Endmills |
|
ISCAR ETS D40-18-W32-XN13 T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR ETS D48-22-W32-15 T-Slot Endmills |
|
ISCAR ETS D48-22-W32-XN13 T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR EX CF4-L CLICKFIT Extension Adapters |
|
ISCAR EX CF4-S CLICKFIT Extension Adapters |
|
ISCAR F45E D 50/2.0-R8 45В° Endmills with SEKN/R 12... Inserts |
|
ISCAR F45E D 50-22 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45E D 63/2.5-R8 45В° Endmills with SEKN/R 12... Inserts |
|
ISCAR F45E D 63-22 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45E D 80-27 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45E D100-32 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45E D125-40 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45E D160-40 45В° Face Mills with SEKN/R 12... Inserts |
|
ISCAR F45KT D100-R06 J 45В° Face Mills, Carrying Octagonal or Round Inserts |
|
ISCAR F45LN D063-08-22-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D080-07-25.40-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D080-07-27-L-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D080-07-27-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D080-10-27-L-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D080-10-27-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D100-08-31.75-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D100-08-32-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D100-12-31.75-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D100-12-32-L-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D100-12-32-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D125-09-40-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D125-15-38.10-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D125-15-40-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D160-12-40-L-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D160-12-40-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D160-12-50.80-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D160-20-40-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D200-14-60-L-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D200-14-60-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D200-25-60-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D250-16-60-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45LN D250-30-60-R-N15 45В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F45NM D063-05-22-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D080-06-27-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D080-08-27-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D100-07-31.75-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D100-07-32-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D100-10-32-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D125-08-38.10-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D125-08-40-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D125-12-40-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D160-10-40-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D160-15-40-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D200-12-60-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D200-18-60-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45NM D250-14-60-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45ST D025-W20 45В° Screw Clamped Endmills with SEK/MT 12... Inserts |
|
ISCAR F45ST D032-W25 45В° Screw Clamped Endmills with SEK/MT 12... Inserts |
|
ISCAR F45ST D040-22 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D050-22 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D063-22 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D080-27 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D100-32 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D125-40 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D160.......JPN 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D160-40 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D200-60 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D250-60 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45ST D80.......JPN 45В° Screw Clamped Face Mills with SEK/MT 12... Inserts |
|
ISCAR F45WG D080-05-25.4-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D080-10-27-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D100-06-31.75FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D100-14-32-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D125-08-38.10FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D125-18-40-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D160-10-50.80FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D160-22-40-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D200-12-60-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D200-28-60-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WG D250-36-60-FX-R08 45В° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges |
|
ISCAR F45WX D080-07-25.40-08 43В° Face Mills with 6 Cutting Edged Double-Sided Inserts |
|
ISCAR F86LNX D050-06-22-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D063-06-22-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D063-08-22-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D080-08-27-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D080-10-27-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D100-08-3175-R-N15 86В° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts |
|
ISCAR F86LNX D100-08-32-R-N15 86В° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts |
|
ISCAR F86LNX D100-10-3175-R-N15 86В° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts |
|
ISCAR F86LNX D100-10-32-R-N15 86В° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts |
|
ISCAR F86LNX D125-10-40-R-N11 86В° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts |
|
ISCAR F86LNX D160-12-50.8-R-N15 86В° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90 D080-27 90В° Face Mills with TPKN/R Inserts |
|
ISCAR F90 D100-32 90В° Face Mills with TPKN/R Inserts |
|
ISCAR F90 D160-40 90В° Face Mills with TPKN/R Inserts |
|
ISCAR F90 D200-60 90В° Face Mills with TPKN/R Inserts |
|
ISCAR F90 D63-22 90В° Face Mills with TPKN/R Inserts |
|
ISCAR F90AD D050-04-22-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90AD D063-04-22-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90AD D063-06-22-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90AD D080-06-27-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D040-04-16-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D040-04-16-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D040-06-16-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D040-06-16-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D050-03-16SFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D050-04-16SFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D050-05-22-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D050-05-22-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D050-05-22-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D050-07-22-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D050-07-22-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-04-22AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D063-05-22-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-05-22-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-06-22AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D063-06-22-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-06-22-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-08-22-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-08-22-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-09-22-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D063-09-22-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-05-27AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D080-07-25.40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-07-25.40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-07-27-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-07-27-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-08-25.40-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-08-25.40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-08-27AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D080-08-27-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-08-27-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-10-25.40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-10-25.40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-10-27-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-10-27-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-11-25.40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-11-27-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D080-11-27-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-06-32AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D100-08-31.75-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-08-31.75-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-08-32-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-08-32-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-09-31.75-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-09-31.75-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-09-32-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-09-32-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-10-32AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D100-12-31.75-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-12-31.75-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-12-32-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-12-32-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D100-14-32-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-08-40AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D125-09-38.10-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-09-38.10-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-09-40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-09-40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-10-40-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-10-40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-12-40AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D125-15-38.10-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-15-40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-15-40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D125-18-40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-10-40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-10-40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-10-50.80-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-10-50.80-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-12-40-L-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-12-40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-14-40AFR CA11 Adjustable 90В° Face Mills (used mainly for PCD/CBN inserts) |
|
ISCAR F90LN D160-20-40-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-20-40-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-20-50.80-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D160-23-40-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D200-12-60-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D200-12-60-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D200-16-60-R-N11 90В° Face Mills with LN..1106... Tangentially Clamped Inserts |
|
ISCAR F90LN D200-25-60-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D200-25-60-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D250-15-60-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D250-15-60-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN D250-30-60-R-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90LN-D125-15-38.1-L-N15 90В° Face Mills with LN..1506... Tangentially Clamped Inserts |
|
ISCAR F90SD D 50-22-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 50-22-CP12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 63-12......J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 63-22-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 63-22-CP12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 80-12......J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 80-27-CP12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D 80-CP12....J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D100-12.....J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D100-32-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D100-32-CP12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D100-CP12....J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D125-40-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D125-CP12....J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D160-12......J 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D160-40-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D160-40-CP16 90В° Face Mills Using SDMT 1606... Inserts |
|
ISCAR F90SD D200-60-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SD D80-27-12 90В° Face Mills with S/QDM. 12... Inserts (Japanese standard) |
|
ISCAR F90SP D 40-16-10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 50-22-CP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 50-22-FP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 63-22-CP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 63-22-FP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 80-27-CP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 80-27-FP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D 80-CP10...J 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D100-32-CP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F90SP D100-32-FP10 90В° Face Mills with S/X/QPMT 1004... Inserts |
|
ISCAR F93CN D52-6-22-R-10 93В° Face Mills with Toroidal Inserts |
|
ISCAR F93CN D66-7-22-R-10 93В° Face Mills with Toroidal Inserts |
|
ISCAR F93CN D80-8-27-R-10 93В° Face Mills with Toroidal Inserts |
|
ISCAR FDN CM-D080-12-22-FE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN CM-D100-12-27-FE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN CM-D100-14-27-HE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN CM-D125-12-32-FE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN CM-D125-14-32-HE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN CM-D160-16-40-HE Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts |
|
ISCAR FDN D050-08-CF4-06 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation |
|
ISCAR FDN D063-03-16-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D063-04-16-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D063-05-16-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D063-06-16-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D063-08-CF4-06 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation |
|
ISCAR FDN D080-03-22-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D080-04-22-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D080-05-22-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D080-06-22-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D080-07-22-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D080-08-22-R06 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D080-08-CF4-06 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation |
|
ISCAR FDN D080-10-22-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D100-03-27-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D100-04-27-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D100-05-27-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D100-0608-27R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D100-06-27-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts |
|
ISCAR FDN D100-07-27-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D100-0810-27R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D100-08-27-R06 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D100-1014-27R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D100-10-27-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D100-10-27-R06 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D100-1419-27R-CALN11 Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts |
|
ISCAR FDN D100-14-27-XN13 Full Slot Flange-Type, Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR FDN D125-07-32-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D125-1014-32R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D125-10-32-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D125-10-32-R06 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D125-12-32-R10 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D125-1419-32R-CALN11 Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts |
|
ISCAR FDN D125-14-32-XN13 Full Slot Flange-Type, Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR FDN D125-16-32-R10 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D125-16-32-XN13 Full Slot Flange-Type, Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR FDN D125-1723-32R-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) |
|
ISCAR FDN D125-1925-32R-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D125-1925-32R-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D160-0608-40R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D160-0810-40R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D160-1014-40R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D160-10-40-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D160-12-40-R10 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D160-13-40-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D160-1419-40R-CALN11 Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts |
|
ISCAR FDN D160-16-40-R10 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D160-16-40-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D160-1723-40R-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) |
|
ISCAR FDN D160-18-40-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D160-18-40-XN13 Full Slot Flange-Type, Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR FDN D160-1925-40R-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D160-1925-40R-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D200-08-40-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D200-10-40-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D200-12-40-R10 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D200-1419-40R-CALN11 Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts |
|
ISCAR FDN D200-1723-40R-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) |
|
ISCAR FDN D200-18-40-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D200-1925-40R-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D200-1925-40R-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D200-20-40-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FDN D200-20-40-XN13 Full Slot Flange-Type, Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges |
|
ISCAR FDN D250-0608-60R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D250-0810-60R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D250-1014-60R-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts |
|
ISCAR FDN D250-10-60-LN12 Full Slot Cutters with LNET 12... Tangentially Mounted Inserts |
|
ISCAR FDN D250-1419-60R-CALN11 Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts |
|
ISCAR FDN D250-1723-60R-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) |
|
ISCAR FDN D250-1925-60R-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D250-1925-60R-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) |
|
ISCAR FDN D250-20-60-R12 Full Slot, Flange-Type Slotting Cutters |
|
ISCAR FF EW D25-050-W25-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D25-080-C25-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D25-080-W25-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D25-120-C24-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D25-M12-06-C Fast Feed Endmills with FLEXFIT Threaded Adaptation |
|
ISCAR FF EW D32-060-CF4-06-C Fast Feed Endmills with CLICKFIT Shanks |
|
ISCAR FF EW D32-060-W25-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D32-100-C32-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D32-100-CF4-06-C Fast Feed Endmills with CLICKFIT Shanks |
|
ISCAR FF EW D32-100-W25-06-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D32-M16-06-C Fast Feed Endmills with FLEXFIT Threaded Adaptation |
|
ISCAR FF EW D35-M16-06-C* Fast Feed Endmills with FLEXFIT Threaded Adaptation |
|
ISCAR FF EW D40-060-CF4-09-C* Fast Feed Endmills with CLICKFIT Shanks |
|
ISCAR FF EW D40-080-CF4-06-C Fast Feed Endmills with CLICKFIT Shanks |
|
ISCAR FF EW D40-100-W32-09-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D40-150-W32-09-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D40-200-CF4-06-C Fast Feed Endmills with CLICKFIT Shanks |
|
ISCAR FF EW D40-200-W32-09-C Fast Feed Endmills with FF WOMT... Inserts |
|
ISCAR FF EW D40-M16-06-C Fast Feed Endmills with FLEXFIT Threaded Adaptation |
|
ISCAR FF EWX D16-2-030-C16-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D16-2-030-W16-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D16-2-050-W20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D16-2-070-C20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D16-2-080-W20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D16-2-MMT10-04 Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-040-W20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-050-C20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-060-W20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-100-C20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-100-W20-04 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-M10-04 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D20-3-MMT12-04 Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-050-W25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-060-C25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-080-W25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-120-C25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-120-W25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-M12-05 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-3-MMT15-05 Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-4-M12-04 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D25-4-MMT15-04 Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-3-060-W32-07 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-3-070-C32-07 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-3-100-W32-07 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-3-120-C32-07 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-3-M16-07 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-040-C25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-060-W25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-060-W32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-070-C32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-100-W25-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-100-W32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-120-C32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-150-W32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D32-4-M16-05 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D35-4-M16-05 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-4-M16-07 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-4-S50-C32-07 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-5-060-W32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-5-200-W40-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-5-L50-C32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-5-M16-05 Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF EWX D40-5-S50-C32-05 Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FW D100-31.75-09-C Fast Feed Face Mills |
|
ISCAR FF FW D100-32-09-C Fast Feed Face Mills |
|
ISCAR FF FW D40-16-06-C Fast Feed Face Mills |
|
ISCAR FF FW D50-22-06-C Fast Feed Face Mills |
|
ISCAR FF FW D50-22-09-C Fast Feed Face Mills |
|
ISCAR FF FW D52-22-06-C Fast Feed Face Mills |
|
ISCAR FF FW D52-22-09-C Fast Feed Face Mills |
|
ISCAR FF FW D63-22-09-C Fast Feed Face Mills |
|
ISCAR FF FW D63-27-09-C Fast Feed Face Mills |
|
ISCAR FF FW D66-22-09-C Fast Feed Face Mills |
|
ISCAR FF FW D66-27-09-C Fast Feed Face Mills |
|
ISCAR FF FW D80-31.75-09-C Fast Feed Face Mills |
|
ISCAR FF FW D80-32-09-C Fast Feed Face Mills |
|
ISCAR FF FWX D040-04-16-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D040-05-16-05 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D050-04-22.225-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D050-04-22-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D050-05-22-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D050-06-22-05 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D052-04-22-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D052-05-22-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D052-06-22-05 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D063-05-22.225-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D063-05-22-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D063-05-27-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D063-06-22-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D066-05-22-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D066-05-27-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D080-06-31.750-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D080-06-32-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D080-07-32-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D100-07-31.750-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D100-07-32-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D100-08-32-07 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D125-09-38.100-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D125-09-40-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
|
ISCAR FF FWX D160-11-40-08 Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges |
