STAHL

Каталог продукции:

STAHL 2PKSS STAINLESS STEEL COVER SCREWS, J SERIES
STAHL DSCCWKIT COVER SCREW KIT
STAHL HP2 PLUG 1INCH
STAHL 92300111127 RELAY
STAHL 8575/13-110 PLUG 16AMP 2P 20-25VAC 50/60HZ
STAHL 8575065010 PLUG 16AMP 2P 20-25VAC 50/60HZ
STAHL 9001/02-093-390-00 INTRINSPAK SAFETY BARRIER
STAHL 6000/522-9501-0150 LIGHT FITTING FLUORESCENT LAMP 18W
STAHL 6000/542-9501-0150 LIGHT FITTING FLUORESCENT LAMP 36W
STAHL 6008/542-9691-7147 LIGHT FITTING FLUORESCENT LAMP
STAHL 9001/01-086-390-101 INTRINSPAK SAFETY BARRIER
STAHL 220-875-01-0002 TWT180 BOARD
STAHL 220-928-01-0002 AKK2 BOARD
STAHL 227-762-01-0001 DRIVE MODULE
STAHL 50048B PCB
STAHL 90-0261-04 SGM-1 BOARD
STAHL DS200 SUCTION CONTROL
STAHL PCS100.1 CONTROLLER
STAHL PSC-M PCB
STAHL TP4A-SG CONTROL MODULE
STAHL TR-5A-0.55Kw 5A DC Drive
STAHL SGM-1 90-0261-04PCB with uPC, power supply and I/O
STAHL KOPELMODUL-2 A/D CONVERTER
STAHL T 202-8 AC Servo Motor & Gearbox
STAHL ET-316-A-TX-TFT AMD LX 800 300 MHz processors HMI
STAHL 9461/12-08-11 Analogue input module HART EXi
STAHL 220-924-01 card with LED
STAHL STH6102-009 Chain Hoist Controller
STAHL STH 1202-021 Chain Hoist Controller Pendant
STAHL SMC21-1-1-(c1)-210 Crane Systems Load Monitor Multicontroller
STAHL nr.227-762-01-00-01 DC DRIVE
STAHL DG 60-5E1KP0J00500 Encoder
STAHL ET-9752FP-ST ET-9752 HMI Unit
STAHL 9185/11-46-10 fieldbus bridge DP for operator interface
STAHL 220-875-01-00-02 i/p card with led
STAHL OZE-400.03A Instrument cases
STAHL WCS2 Linear Encoder
STAHL 220-928-01-00-02 Motor Controller PCB
STAHL ET-6 FP-STAHL Operator Interface
STAHL MT-81A-RS-422 Operator Interface Unit
STAHL 220-928-01-00-01 PCB
STAHL TSR-1,5/Y PCB Control
STAHL WCS1-P2600A-AW power supply
STAHL 9440/22-01-11-C1243 Profibus PSU
STAHL 0CS-050.10Z Quasi-Pro Software for EW-200.01A/B
STAHL ET-65 R HMI
STAHL FSE 516 Radio Control Receiver
STAHL 9251/01-60 Relay Repeater
STAHL 9475/12-08-51 Remote IO digital output module
STAHL WCS2A-L310 Sensor Unit
STAHL WCS2B-L310 Sensor Unit
STAHL TR-4A-SB Small drive
STAHL ET-75-RS422 STAHL MAKE HMI ET-75 TYPE: ET-75 RS 422
STAHL 220-923 BG01 STAL PCB
STAHL 578 441 0 Stalhtronic SLM1-140 Control Unit
STAHL SLE1-280-B tronic Limit Switch
STAHL WCS 3 tronic Optical sensor unit.
STAHL WCS2-LS311 tronic Slot Sensor
STAHL ET-306 Universal operator interface TFT Color 64K colours 10.4.
STAHL Stahl Paper Folder Upgrade
STAHL MT-80A-TTY-FP VFD operator interface.
STAHL MT-80B-MPI FP VFD unit
STAHL 203633 OPTICAL FIBRE SPLICE CASSETTE, FOR INSTALLATION OF 6 OR 12 FIBRE OPTICS, EXPLOSION PROTECTION, FO CAN PROVIDE POWER SUPPLY TO ALL FOUR SIDES
STAHL 248-199-01-00 PC BOARD, RACK MOUNT, STAHL, 248-199-01-00
STAHL 6014/1114-2951-1100-14 FLOURESCENT LIGHT ENCLOSURE 220-240VAC/DC 2X36W
STAHL 6162/17-11-311 SIGNALING BEACON, 230VAC, 50-60HZ, 20W, 50000 LIFE, IP66 PROTECTION, INTEGRATED EX E CONNECTION CHAMBER, SEAWATER RESISTANT ALUMINIUM, 180 LIGHT SIGNALS PER MINUTE
STAHL 6521/3111-215-112 LIGHT 120-277V 50/60HZ
STAHL 8003/113 SELECTOR SWITCH, 3 POSITION, 6AMP, 500V, 1250VA, IP65
STAHL 8003/113-001-6 CONTROL BUTTON, 6 AMP, 500 V, 1250 VA, SERIES 8003, IP65, ENCLOSURE: POLYAMIDE, CONTACT: SILVER-NICKEL, 6 METER CABLE
STAHL 8003/121 PANEL MOUNTED CONTROL DEVICE BASE, 10 AMP, 600VAC, 110VDC,
STAHL 8003/131-726-3 SELECTOR SWITCH SPRING CLAMP 6A 500VAC 3POS 2NO
STAHL 8003/133-726-3-RR-6 CONTROL BUTTON, 6 AMP, 500 V, 1250VA, PLUG IN CONNECTION, 6 METER CONNECTION LINE, NO/NO, ENCLOSURE: POLYAMIDE, CONTACT: SILVER-NICKEL
STAHL 8003/133-726-3-TT-6 CONTROL BUTTON, 6 AMP, 500V, FOR PANEL MOUNTING, 8003/1.3 SERIES, IP65, ENCLOSURE: POLYAMIDE, CONTACT: SILVER-NICKEL, 6 METER CABLE
STAHL 8006/3-045-00 MOTOR SWITCH, 3 POLE, 16/25 AMP
STAHL 8006/4-049-00 MOTOR LOAD SWITCH 25AMP 6P 690VAC 22KW
STAHL 8008/2-003 OP/CONTROL SWITCH 10A 2P 600VAC 2POS MAINTAINED
STAHL 8008/2-040 CONTROL SWITCH, SERIES 8008, 690VAC, SUITABLE FOR EM-STOP, 4 POLE
STAHL 8008/2-049 OP/CONTROL SWITCH 10A 2P 600VAC 2POS SPRING RETURN
STAHL 8008/2-054 OP/CONTROL SWITCH 10A 2P 600VAC 3POS SPRING RETURN
STAHL 8008/2-106 CONTROL SWITCH, 10AMP, 4POLE, 600VAC
STAHL 8008/2-1113 CONTROL SWITCH, 6AMP, 600VAC, 3 POSITION, SCREW MOUNT
STAHL 8008/2-1125 OP/CONTROL SWITCH 10A 2P 600VAC 3POS RETURN/MAINT
STAHL 8008/2-1141 OP/CONTROL SWITCH 10A 2P 600VAC 3POS RETURN/MAINT
STAHL 8008/2-127 OPERATOR CONTROL SWITCH 10AMP 4P 600VAC 3POS
STAHL 8010/3-02-GN PILOT LIGHT, GREEN, 10-24VAC/DC, 20MA, 1W
STAHL 8013/22-02-46 INDICATION LIGHT, YELLOW, 24 V AC, 50/60 HZ, 6 M FLEXIBLE LEAD
STAHL 8013/22–02–26 INDICATION LIGHT, RED, 24 V AC, 50/60 HZ, 6 M FLEXIBLE LEAD
STAHL 8013/22–02–56 INDICATION LIGHT, GREEN, 24 V AC, 50/60 HZ, 6 M FLEXIBLE LEAD
STAHL 8013/22–02–96 INDICATION LIGHT, WHITE, 24 V AC, 50/60 HZ, 6 M FLEXIBLE LEAD
STAHL 8018/221-022-36 ILLUMINATED PUSHBUTTON, WITH FLEXIBLE LEAD, RED, 24 VAC, ACTUATOR SPRING RETURN, LEAD LENGTH 6 M
STAHL 8018/221-024-36 ILLUMINATED PUSHBUTTON, SERIES 8018, FOR PANEL MOUNTING, 24 VAC, YELLOW, ACTUATOR SPRING RETURN, LEAD LENGTH 6 METER
STAHL 8018/221-025-36 ILLUMINATED PUSHBUTTON, 8018 SERIES, WITH FLEXIBLE LEAD, GREEN, 24 VAC, ACTUATOR SPRING RETURN, LEAD LENGTH 6 M
STAHL 8040/11-J-U-2MN CONTROL STATION, COMPACT ENCLOSURE SIZE, CONSIG 8040 SERIES, ENCLOSURE SIZE: 11, J=M20 GLAND BOTTOM FEED, NON-METALLIC CABLE GLAND, U=1NO/1NC CONTACT TYPE, 2 POSITION SELECTOR SWITCH, MAINTAINED/MAINT
STAHL 8040/114-O2MN1 CONTROL BOX, 2 POSITION SWITCH
STAHL 8040/334-PLA2-PLG1-U2312 CONTROL STATION, PUSHBUTTON START/STOP, GREEN/ YELLOW LIGHT
STAHL 8146/062-3 TERMINAL BOX, GREY
STAHL 8146/5-602-5002 JUNCTION BOX WITH DISCONNECT SWITCH, 600VAC/220VDC, 16A, 12AWG
STAHL 8146/5052-3 ENCLOSURE, W/ SWITCH, 690 V, 25 AMP
STAHL 8146/5052-3D ENCLOSURE, W/ SWITCH, 690 V, 25 AMP, 8NO
STAHL 8146/5061-3 INDUSTRIAL CONTROL, FOR HAZARDOUS LOCATIONS, 12 AWG, 240 V, 10 MA, 50/60 HZ
STAHL 8171-01-KK BUSHING GLAND FLAMEPROOF FEED THROUGH 630V
STAHL 8,20814E+11 SNAP SWITCH 5A 250V AC1 24V
STAHL 05.02.8403 AMMETER FOR CURRENT TRANSFORMER BOT.CONN.W/O SCALE
STAHL 8415/24-50-G-9 PILOT LIGHT, GREEN, 110 / 127 VAC
STAHL 8510/111-02-209-220 AUXILIARY CONTACTOR RELAY MODULE, 8510 SERIES, 2W, 5 AMP, 24 VDC, 2 CHANGE OVER CONTACTS, IP20, EPOXY ENCLOSURE
STAHL 8510/122-03-131-060 CONTACTOR, 10 AMP, 3 POLE, 400V, 50/60 HZ
STAHL 8510/122-03-131-210 CONTACTOR, 10 AMP, 3 POLE, 400V, 50/60 HZ
STAHL 8510/122-03-131-240 CONTACTOR 10A 3P 400V 50/60HZ
STAHL 8510/122-03-66-010 CONTACTOR 10A 3P 690VAC COIL:24VAC 50/60HZ 2NO 2NC
STAHL 8510/122-05-235-070 MOTOR PROTECTION RELAY, 1.60 AMP, 690 VAC, 3 POLE, 3 N/O, 2 AUXILLIARY CONTACTS
STAHL 8510/122-09-S15 CONTACTOR 25A 3P 690VAC 15KW 2NO 2NC
STAHL 8510/141-03-132-030 CONTACTOR MOTOR SWITCHING 20AMP 3P 400VAC
STAHL 8510/141-03-604-030 CONTACTOR MOTOR SWITCHING 6AMP 3P 110V 50/60HZ 4NO
STAHL 8510/141-03-606-010 CONTACTOR MOTOR SWITCHING 6AMP 3P 500VAC
STAHL 8510/141-03-606-230 POWER SUPPLY MODULE
STAHL 85238 MOTOR LOAD SWITCH, 6A, 3P
STAHL 8537/2-701-7000 SAFETY SWITCH, 16AMP, 3 POLE, 690-500V
STAHL 8537/2-702-7000 SAFETY SWITCH 16AMP 3P 690VAC
STAHL 8537/2-702-7001 SAFETY SWITCH, 16AMP, 3P, 690VAC, STAHL – 8537/2. 16 A, SAFETY SWITCH 3 POLES 16 A 8537/2 – 702 – 7001
STAHL 8543/40-021-00 MOTOR LOAD SWITCH 40AMP 4P 3PH 690VAC 50/60HZ
STAHL 8544A0313-6 PARALLEL DRIVE ACTIVATOR FOR 2 LOAD SWITCHES 8544
STAHL 8548/2-006-000 MOTOR/LOAD DISCONNECT SWITCH 160AMP 6POLE 690VAC
STAHL 856/52-1045-020 CONTACTOR 2P 2A 230V
STAHL 01.01.8561 FUSE BASE, 16A MAX, AC 400 V / DC 250 V
STAHL 8562/51-1190-320 CONTACTOR 2P 32A 230V
STAHL 8562/52-2010-100 STAHL, 8562/52-2010-100, 8562/522010100, CIRCUIT BREAKER, 10A, 2POLE,
STAHL 8562/52-2030-040 CIRCUIT BREAKER 4AMP 2P 230/400VAC 110VDC 6KA 2NO
STAHL 8562/52-2420-010 CIRCUIT BREAKER
STAHL 8562/52-2420-020 BREAKER PANELBOARDS 2AMP 2P 120/240VAC
STAHL 8562/52-2510-250 CONTACTOR 2P 25A 480Y/277V 50/60HZ
STAHL 8562/52-5040-320 CONTACTOR 32A 2P 230V
STAHL 8562/53-2025-160 CIRCUIT BREAKER 16AMP 3P 230/400VAC 110VDC 10KA
STAHL 8562/53-2045-040 CIRCUIT BREAKER 4AMP 3P 230/400VAC 110VDC 10KA
STAHL 8562/54-3045-060 CIRCUIT BREAKER 6AMP 3P 230/400VAC 110VDC 6KA 3NO
STAHL 8563-2-40-030 CONTROL RELAY, 40AMP, 4POLE, COIL 110/220V
STAHL 8570/11-411 SWITCH SOCKET 16A 440-460V
STAHL 8570/22-307 PLUG, 480V, 50/60HZ, 20A, 12AWG, 2 POLES, 3 WIRE
STAHL 8571/12-405 RECEPTACLE PLUG 32AMP 5H 3P+N 600-690V 50-60HZ
STAHL 8571/12-406 RECEPTACLE PLUG 380-415V 50-60HZ
STAHL 8571/21-407 RECEPTACLE, SINGLE, 480 V, 30 AMP, 3 POLE, 4 WIRE, COLOR RED, 1\" NPT HUB, HAZARDOUS/CORROSIVE DUTY
STAHL 8575/11-405 RECEPTACLE SWITCH, 16AMP, 4POLE, 600-690VAC, 5H, MOUNTABLE
STAHL 8575/12-110 PLUG, EXTRA LOW VOLTAGE, 16 AMP, 20-25 VDC, 10H, VIOLET COLOR
STAHL 8602A0003-1 PUSH BUTTON SWITCH, MUSHROOM, MONENTARY, 38MM, BLACK ROUND
STAHL 8602A0023-1-S PUSHBUTTON, START/STOP
STAHL 8602A0727-1-2-R-H ACTUATOR PLASTIC BLACK
STAHL 8602C3-733-B ACTUATOR FOR CLOSING UNUSED HOLES IN COVERS, 30.5MM
STAHL 8604C1-3-2-1-01-1-1 ACTUATOR OFF/ON SIZE 3 BLACK
STAHL 89-290-01-98-0 SAFETY BARRIER
STAHL 8901/30-050/150/00-3V SAFETY BARRIER 3V
STAHL 8901/30-280/100/00-24V SAFETY BARRIER 24V
STAHL 8901/31-126/150/00 STAHL, 8901/31-126/150/00, 89013112615000, INTRINSIC SAFETY BARRIER, INTRINSPAK, 8V INPUT, 12V 91OHM
STAHL 8901/31-199/010/00 SAFETY BARRIER, 16V
STAHL 8901/31-24/150/3 SAFETY BARRIER
STAHL 8901/32-016/050/02 SAFETY BARRIER PLUS OR MINUS 0.7V 40OHM
STAHL 8901/32-175/050/00 SAFETY BARRIER, UM=250V, UE=12V, RL=438OHMS, ISI=63MA, UZ=17.5V, IM=50MA
STAHL 8901/32-412/065/80 SAFETY BARRIER, 720OHM, 36V-INPUT, 63MA, 250V MAX
STAHL 8901/33-168/000/00 SAFETY BARRIER, 12V INPUT, 250MAX, 160MA
STAHL 24.11.8925 SAFETY CONTROL
STAHL 9001/00-083-442-00 SAFETY BARRIER, INTRINSICALLY SAFE, INTRINSPAK
STAHL 9001/00-086-390-101 SAFETY BARRIER, 9001/00-086-390-101
STAHL 9001/00-168-020-10 SAFETY BARRIER, 12V
STAHL 9001/00-280-110-10 •SAFETY BARRIER INTRINSPAK 24V
STAHL 9001/01-083-442-101 SAFETY BARRIER, 6V,
STAHL 9001/01-086-270-10 SAFETY BARRIER, SINGLE CHANNEL
STAHL 9001/01-158-150-101 SAFETY BARRIER, 150 MA, 12VDC, 135 OHM MAX RESISTANCE, 50-100KHZ, SINGLE CHANNEL, DIN RAIL, IP40
STAHL 9001/01-158-270-101 BARRIER
STAHL 9001/01-158-390-101 SINGLE-CHANNEL SAFETY BARRIERS, 15 VOLT
STAHL 9001/01-199-100-10 INTRINSPAK SAFETY BARRIER, 16V
STAHL 9001/01-252-070-101 SAFETY BARRIER 70MA 25.2V INTRINSPAK
STAHL 9001/01-280-020-101 SAFETY BARRIER, SERIES 9001, ART. NO. 158655, SINGLE-CHANNEL SAFETY BARRIERS
STAHL 9001/01-280-075-101 SAFETY BARRIER, INTRINSPAK, 28/250V, 75MA, 525MW, 3.3MH, 0.083UF
STAHL 9001/01-280-085-00 SAFETY REPEATER BARRIER, INTRINSPAK, AREA VOLT 250V, INPUT 24V
STAHL 9001/01-280-280-101 SINGLE CHANNEL SAFTEY BARRIER, 24V, CONTROLLED, NOMINAL VOLTAGE, CONNECTION TYPE: 2 PA
STAHL 9001/02-016-150-111 SAFETY BARRIER INTRINSPAK PLUS OR MINUS 0.7V
STAHL 9001/02-093-030-10 SAFETY BARRIER 6V
STAHL 9001/02-093-030-101 SAFETY BARRIER, 6V,
STAHL 9001/02-280-090-10 SAFETY BARRIER 28/250V 90MA
STAHL 9001/03-199-000-101 SAFETY BARRIER 16VDC 4TERMINAL IP20/IP40
STAHL 9001/03-280-000-101 , SAFETY BARRIER
STAHL 9002/77-220-296-001 SAFETY BARRIER, DUAL CHANNEL, 158881,
STAHL 9002/77-280-094-001 STAHL, 9002/77-280-094-001, 900277280094001, SAFETY BARRIER
STAHL 9004/01-280-025-00 SAFETY BARRIER, 24V, MACHINE SAFETY CONTROL
STAHL 9004/01-315-025-00 SAFETY BARRIER, 2P
STAHL 9004/51-206-050-001 SAFETY BARRIER, SINGLE CHANNEL, 20.6V, 50MA, 1030MW, 0.58UF, 2.5MH, 23-27VDC POWER SUPPLY, IP20, IP40
STAHL 9143/10-114-200-10S POWER SUPPLY, FIELD CIRCUIT, IPAC, 230VAC
STAHL 9160/13-10-11S TRANSMITTER SUPPLY UNIT 24V 2CHANNEL 2WIRE 4/20MA
STAHL 9160/13-11-11 TRANSMITTER SUPPLY UNIT, 4-20 MA, 24 VDC, 1 CHANNEL
STAHL 9162/13-11-12 TRANSMITTER FIELD SUPPLY UNIT W/LIMIT VALUES 24VDC
STAHL 9162/13-11-14 TRANSMITTER SUPPLY UNIT, W LIMIT CONTACT, 4 - 20 MA, 24 V
STAHL 9164/13-22-08 ISOLATING REPEATER, 4/20MA HART, INPUT: 30V 150MA 1W, OUTPUT: 30V 150MA 0.8W
STAHL 9165/16-11-11 INPUT MODULE
STAHL 9165/26-11-10 ISOLATING REPEATER, 50MA, 24VDC, 350VAC, 0-10KHZ, 400OHM, BI-DIRECTIONAL HART TRANSMISSION,
STAHL 9165/26-11-11S ISOLATING REPEATER, EX I FIELD CIRCUIT ISPAC, 2CHANNEL, SERIES 9165
STAHL 9167/14-11-00S ISOLATING REPEATER LOOP 107MA 18.8V SCREW TERMINAL
STAHL 9170/10-12-11S SWITCHING REPEATER, 24 V DC AUX POWER, 4 A, SINGLE CHANNEL, 250 V AC OUTPUT, IP 20 TERMINAL PROTECTION, IP 30 CASE PROTECTION
STAHL 9170/10-14-12S ISOLATOR RELAY 10.6AMP 253V 24MA MODULE 2CHANNEL
STAHL 9170/20-10-21 TRANSMITTER TEMPERATURE, TYPE 9170
STAHL 9170/20-12-21 ISPAC ISOLATORS, SWITCHING REPEATER, 2 CHANNELS, 70C, WITHOUT VENTILATION
STAHL 9170/21-14-12S SWITCHING REPEATER FIELD CIRCUIT SCREW TERMINAL
STAHL 9180-10-77-11S RESISTANCE ISOLATOR, 24VDC, TYPE 9180
STAHL 9182/10-51-11 TRANSMITTER TEMPERATURE, INPUT VOLTAGE 24VDC, DIP SWITCH SETTINGS, SCREW TERMINALS, LED NOTIFICATION
STAHL 9182/10-59-11S TEMPERATURE TRANSMITTER 19.7MA 6.5V SCREW TERMINAL
STAHL 9182/20-51-11 TEMPRATURE TRANSMITTER, 19.7MA, 6.5V, 32MW, DIN RAIL MOUNT
STAHL 9185/11-35-10 FIELDBUS ISOLATING REPEATER ISPAC, 24 VDC, OPERATING TEMPERATURE: -20 C TO +70 C, DIN RAIL MOUNT, ADJUSTABLE TRANSMISSION SPEEDS OF 1.2 KBIT/S AND 1.5 MBIT/S - AUTOMATIC WITH PROFIBUS DP, 227598
STAHL 9185/11-45-10S FIELDBUS ISOLATING REPEATER, ISPAC, 24 VAC/DC, 24VUC, 66.00MA, 1.60W, -20 DEG.C / +70 DEG.C (SINGLE DEVICE), -20 DEG.C / + 60 DEG.C (GROUP ASSEMBLY)
STAHL 9192/32-10-10 MULTIPLEXER SENSOR
STAHL 9201/04-02-24 RELAY AMPLIFIER, ICS, 1000 INPUT
STAHL 9230/0112-127 STAHL, 9230/0112-127, 92300112127, RELAY REPEATER, 10.5V 21MA
STAHL 9231/0111-110 RELAY REPEATER, 0.1-2.5AMP, 220/24V, 50WATT
STAHL 9231/0111-127 RELAY REPEATER, 0.1-2.5AMP, 220/24V, 50WATT
STAHL 10.01.9250 REPEATER RELAY, 4 AMP, 24 VDC, 250 VAC, 100 VA
STAHL 10.05.9250 REPEATER RELAY, 9250/01-40, 92500140, REPEATER RELAY, 4AMP, 24VDC, 250VAC, 115V
STAHL 20.01.9251 RELAY SWITCHING REPEATER 2AMP SINGLE CHAN
STAHL 9311/52-11-00 I.S. ISOLATOR, MA ISOLATING REPEATER, LOOP POWERED, TYPE 9311, DIN RAIL MOUNTING, 25.2 V / .92 MA OUTPUT SIGNAL, INPUT 35 V, CURRENT RANGE 0-20 MA
STAHL 9323/10-30-10 ISOLATING REPEATER
STAHL 9324/10-51-11 RELAY, ISOLATOR, MULTI PURPOSE TRANSMITTER, 250V, 15MA
STAHL 9372/21-11-10 FEILDBUS ISOLATOR REPEATER, 24 VDC
STAHL 9373/21-12-10 FIELDBUS ISOLATING REPEATER
STAHL 9381/10-158-160-10 IS ISOLATOR, POWER SUPPLY, 24V, AC/DC, MAX VOLTAGE 15.80V, 160MA MAX, 2528 MW
STAHL 9466/12-08-11 ANALOG OUTPUT MODULE HART, PTB 99 ATEX 2207
STAHL 9470/32-16-11 REMOTE I/O, IS1+ DIGITAL INPUT-OUTPUT MODULE FOR ZONE 1 EX I, 210447
STAHL 9471/15-16-12 DIGITAL INPUT MODULE, 24V, 16CHANNEL, DIN RAIL MOUNT
STAHL 9475/12-04-11 INPUT MODULE
STAHL 9475/12-04-21 DIGITAL OUTPUT MODULE. 4. DIV. 1 & 2, ZONE 1 & 2. SOLENOID, LED INDICATOR, HORN
STAHL 9475/12-04-31 OUTPUT MODULE, 4CHANNEL, 16POINT, 26.2V, 90MA
STAHL 9477/15-08-12 (168694) REMOTE I/O IS1 DIGITAL OUTPUT MODULE RELAY, FOR ZONE 2 EX N,
STAHL 9481/12-08-11 I/O MODULE, HAZARDOUS LOCATION, 8 CHANNEL, THERMOCOUPLES, MV SIGNALS
STAHL 11.11.9490 BASE SOCKET FOR CPU & POWER MODULE 9440/12-01-11
STAHL 9603/31-22-10 TRANSMITTER SUPPLY UNIT
STAHL 9613/53-11-01 ISOLATING REPEATER UNIT
STAHL 9621/03-22-11 RESISTANCE TRANSMITTER, ICS100, OUTPUT: 4...20 MA, PCB CIRCUIT BOARD
STAHL 9621/04-41-10 RESISTANCE TRANSMITTER
STAHL 02.01.9681 SUPPLY VOLTAGE MONITORING
STAHL AP-G/2.10-PSE THROTTLE ACTUATOR, AUTO PILOT, SEAT-MOUNTED OPTIONAL SEAT RAIL MOUNTING ADAPTER, 0.45MILES/SEC MAX, MOTOR VOLTAGE 24VDC
STAHL T202-8-1/1 ELECTRICOL CHAIN HOIST 1.3A 3PH 415VAC 50HZ
STAHL WCS3A-LS227S-0 STAHL, WCS3A-LS227S-0, WCS3ALS227S0, READING HEAD, 24VDC
STAHL WCS3A-LS246 READ HEAD RS485 POSITRACK SYSTEM 24VDC 2VA
STAHL YL60/B/D50/R/UL ALARM HORN / SIGNALING DEVICE / FLASHING BEACON, AUDIBLE / VISUAL, SERIES YL60 / YODALEX, FLAMEPROOF, NEMA 4X / IP66, 110 DBA, RED LENS, 570 MA, 24 VDC
STAHL 244-334-01-00 CONTROL ASSEMBLY
STAHL 8562/54-2070-100 CIRCUIT BREAKER 10AMP 2P 230/400VAC 6KA 2NO 30MA
STAHL 8562/52-2420-100 MCB2P.K1 0A10KA240VUL489
STAHL 8562/51-1030-200 CIRCUIT BREAKER, 20AMP, 1 POLE
STAHL 12.12.9490 SOCKET, REMOTE I/O IS1 BASE, FOR CPU AND POWER MODULE FOR ZONE 1 / CLASS I
STAHL 8571/11-506 SOCKETS, WALL-MOUNTING, SOCKETS
STAHL ET-X06-PS1 COMPUTER MODULE, SEALED, ALL IN ONE.
STAHL 9468/32-08-11 REMOTE I/O, IS1+ HAR, T ANALOG UNIVERSAL MODULE
STAHL 9621/03-22-10 RESISTANCE TRANSMITTER, 4...20 MA, ICS 1000
STAHL 275063 POSITION SWITCH, 8070/2-1-D-U60 NO/NC, ROCK
STAHL 8040/11 CONTROL SWITCH, 500V, 230V
STAHL 227-794-01 DC DRIVE CONTROL BOARD, FOLDING MACHINE, TORQUE/AMP ADJUSTABLE
STAHL 858141207 RECEPTACLE 125AMP 3POLE 480V 100HP 50/60HZ
STAHL 858141407 RECEPTACLE 125AMP 3POLE 480V 100HP 50/60HZ
STAHL 61612611210 BEACON
STAHL 61612612210 BEACON
STAHL 8146/5-V37-306-51-0010 SAFETY SWITCH, 1 NC AUXILIARY CONTACT, 1 NO/DELAYED AUXILIARY CONTACT
STAHL SD40IS/3/X/R/A/B/RN SIGNALING BEACON, V4 TRIPLE, LED STATUS BEACON
STAHL ET-416-FX PANEL PC, SERIES 400, 10IN DISPLAY
STAHL ET-456-AT-R1-TFT-TX-4GB-PE OPERATING AND MONITORING SYSTEM, 19INCH DISPLAY FOR OIL/GAS IND
STAHL ET-65-RS422 HMI TERMINAL
STAHL ET-65-B-RS422-RSI MEMBRANE KEYPAD
STAHL MT-81A-TTY-FP OPERATOR INTERFACE
STAHL 9260-23-11-10S SAFE ANALOG INPUT ISOLATOR, (2) 0-20 MA OR (2) 4-20 MA INPUT, (2) 0-20 MA OR (2) 4-20 MA OUTPUT
STAHL 9260-19-11-10S STAHL INTRINSICALLY SAFE ANALOG INPUT ISOLATOR, 0-20 MA OR 4-20 MA INPUT, (2) 0-20 MA OR (2) 4-20 MA OUTPUT
STAHL 9182-10-51-11S INTRINSICALLY SAFE TEMPERATURE INPUT ISOLATOR, RTD OR THERMOCOUPLE INPUT, 0-20 MA OR 4-20 MA OUTPUT
STAHL 9165-16-11-11S STAHL INTRINSICALLY SAFE ANALOG OUTPUT ISOLATOR, 0-20 MA OR 4-20 MA INPUT, 0-20 MA OR 4-20 MA OUTPUT
STAHL 9260-13-11-10S INTRINSICALLY SAFE ANALOG INPUT ISOLATOR, -20 MA OR 4-20 MA INPUT, 0-20 MA OR 4-20 MA OUTPUT
STAHL 258198 BALLAST, 6042/243-21, 2CHANNEL
STAHL 209426 STROBE LIGHT, FLANGE, SEALED
STAHL SU-A 1143 214 MOTOR, 3-AC, TRAVEL SPEED 25
STAHL 8579/31-506-S010 SWITCH SOCKET, 8579 SERIES
STAHL 8579/31-506-S009 SWITCH SOCKET, WS, 200/346-240/415V
STAHL 8571/11-505 WALL-MOUNTING SOCKET
STAHL 8570/11-406 SWITCH SOCKET, LOCAL ISOLATOR ATEX, 16A C/W
STAHL 8579/12-506 PLUG, 63A, 85 SERIES
STAHL 10.02.9251 REPEATER RELAY, 250VAC, 24VDC
STAHL 8562/52-2040-100 149783,5 - 2P MCB C10A 10KA
STAHL 706011V SWITCH
STAHL 9440/15-01-11-C1243 DPV1 CPU POWER MODULE, REMOTE I/O IS1, EXPLOSION-PROTECTED
STAHL 9440/22-01-11 CPU & POWER MODULE, EXPLOSION PROOF, PROT DIV1 ZONE1
STAHL 9468/33-08-10 AUMH 08 Z2 I/O MODULE, REMOTE, 8 CHANNELS
STAHL 9471/35-16-11 DIGITAL INPUT MODULE, NAMUR FOR EX N ZONE 2, 16 CHANNELS CAN BE ADJUSTED IN PAIRS AS DIGITAL INPUTS OR OUTPUTS
STAHL 00.785.0638/SGM3 PC BOARD, FX289-721-BG-01, WITH 115 VAC TRANSFORMER
STAHL 9470/33-16-10 DIOM 16 Z2 I/O MODULE, DIGITAL, 16 CHANNEL
STAHL 286-302-01-00 STAHL, 286-302-01-00, 2863020100
STAHL 9475/33-08-60 DOM 08 Z2 OUTPUT MODULE, DIGITAL, 8 CHANNEL
STAHL 9475/32-04-22 DIGITAL OUTPUT MODULE, 4-CHANNEL VERSION, ART. NO. 210652
STAHL 9411/21-210-31 FIELD DEVICE COUPLER, SERIES 9411, 4 SPUR
STAHL 9185/12-45-10 FIELDBUS ISOLATING REPEATER, X3, LOOP POWER
STAHL 9251-02-40-ICS-PAK GALVANIC ISOLATOR DUAL INPUT 100-140VAC SPDT RELAY OUTPUT, 807H-G232 STAHL RELAY REPEATER MODULE 9251/02-40
STAHL 91821015111S MODULE
STAHL 9170/21-11-21S ACTUATOR
STAHL 9143/10-124-15010S POWER SUPPLY MODULE, EXI POWER SUPPLY, FEILD CIRCUIT EXI
STAHL 9143/10-156-160-10 POWER SUPPLY, 9143 SERIES, 12.5 -4.7V
STAHL 6044801740 BATTERY PACK, 6V, 7AH ACCESSORY
STAHL 212210 LOAD DISCONNECT SWITCH, 8146/5-V37-308-51-1010, 3POLE
STAHL 8146/5-V37-308-51-0010-K SAFETY SWITCH, 125/160AMP, 400/690V
STAHL 8146/5-V37-305-51-0010-K SAFETY SWITCH, (200206)
STAHL 9160/13-10-11 ISOLATOR MODULE REPEATER HART INPUT IS PAC
STAHL 8146/5-V37-302-50-0050 SAFETY SWITCH, (201404)
STAHL G-8 ROTARY POSITION TRANSMITTER
STAHL 8,12551E+12 PANEL